• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.21-24
• /
• 2005

In this study, new methods of PC panel connection using 'ㄷ'type steel connection is proposed for highly seismic zone. A study was carry out to investigate the connection behavior subjected to cyclic inelastic loading. Three planar type and two T type PC wall will be tested. The variables will be examined were the shear reinforcement existence of top and bottom walls. The specimens will be tested only reverse cyclic loading in accordance with a prescribed displacement history. To transfer the shear strength shear key set up between top and bottom wall. Failure mode, behavior, ductility and energy dissipation capacity of the specimens constructed by new connections wll be compared with those of monolithic walls and Han's(Han, Jun Hee, Seoul National University) model.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.851-856
• /
• 1996

Copper Phthalocyanine (CuPc) thin films were fabricated on the silicon wafers by plasma activated evaporation method and structural analysis were carried out with various spectroscopies. The CuPc films had dense and smooth morphology and they also showed good mechanical properties and chemical resistance. The main molecular structure of the CuPc, which is the conjugated aromatic heterocyclic ring structure, was maintained even in the plasma process. However, metal-ligand (Cu-N) bands were deformed by the plasma process and the structure became amorphous especially at higher process pressures. Oxygen impurities were incorporated in the film and carboxyl functional groups were formed at the peripheral benzene ring. The structure and morphology of the films were dependent on the process pressure but relatively irrespective of the RF power.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.2
• /
• pp.101-108
• /
• 2008

In this paper, we develop system to backup automatically personal data by real time based on ECA model. This system backups data that is changed in user PC using CDP technology based on ECA model. Proposed ECA model defines file's change such as file creation, update, remove etc. in user PC to event for synchronization between server and user PC. If event is detected about file, proposed system examines condition that is defined and backup the file to server. Backup data that is stored to server can recovery on point of time that user wants. The proposed system can be applied to data management system for business, personal data management system, high-capacity contents management system etc.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2463-2465
• /
• 2002

본 논문에서는 Home Automation을 위한 하드웨어와 제어용 프로그램의 개발에 목적을 두었다. Home Automation에 쓰인 하드웨어 부분에서는 8051 마이크로 컨트롤러를 사용했다. 본 논문에서 가장 중요한 부분은 플랜트끼리의 통신 알고리즘이며, 일반 가정용 IBM PC의 USB 포트를 이용한 화상 전달방법이다. 화상 전달에 필요한 DLL부분은 C++로 제작되었으며 전체적인 제어용 프로그램은 비주얼툴인 Visual Basic으로 제작하였다. 하드웨어는 각각의 플랜트에 따라 각각의 구동부가 있으며 몇몇 구동부에는 다중 통신을 위한 8051 마이크로 프로세서가 있다. 이 모든 장치의 데이터 흐름을 알 수 있도록 PC를 통해 디스플레이하며 PC와 직렬 통신을 통해 이 모든 것이 이루어진다.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.213-214
• /
• 2007

In this paper, we implement one tracking scheme based on the block matching using PowerPC system. We implement tracking algorithm uses the information from Infrared (IR) sensor for tracking object. When a occlusion occurs, the proposed algorithm predicts movements of an object using the historical tracking information and it can keep the object tracking.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.110-112
• /
• 2003

본 논문에서는 확률적인 전역 최적화 알고리즘인 유전 알고리즘과 경험적인 최적화 알고리즘인 타부 탐색법을 병렬화함으로써 최적해 탐색성능 및 탐색속도를 개선하는 방안을 개발하였다. 배전계통의 주변압기에서 고장이 발생한 경우에는 여러 정전구역에 대한 복구문제가 되어 매우 복잡하고 많은 연산량을 수반한다. 따라서 제안한 고장복구 알고리즘은 PC 클러스트링을 이용하여 각 프로세서별로 유전 알고리즘 또는 타부 탐색법을 사용하여 최적해를 탐색한 후 일정 기간 이후에 해를 교환함으로써 배전계통에서의 주변압기 고장발생시 최적해 탐색에 소요되는 시간을 단축하였으며 고장복구 지원시스템의 성능개선을 도모하였다. 제안한 알고리즘의 유용성을 입증하기 위하여 한전의 실 배전계통 주변압기 고장복구 문제에 적용함으로써 제안한 알고리즘이 해의 탐색속도 및 해의 성능면에서 우수함을 입증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.332-334
• /
• 2014

PC와 모바일 디바이스 간에 데이터를 전송하는 방법은 여러 수단이 있으나, 직접 연결 또는 동일한 IP의 소켓통신을 위한 방법만이 존재한다. 이러한 방법들은 PC 와 모바일 디바이스가 직접적으로 연결되어야 가능하며, 동일한 OS가 아닌 경우 자료형의 범위 차이로 인한 데이터 훼손이 발생한다. 이를 개선하기 위해 데이터베이스 영역을 공유하며 데이터의 입 출력 시에 Base64 코드로 변환하여 데이터의 형태를 통일 시키는 방법을 사용한다. 본 논문에서는 서로 다른 이기종 플랫폼 PC와 모바일 디바이스 간의 이미지 데이터 비교를 위하여 원본 바이트코드를 Base64로 변환 하는 과정을 거친다. 이 때 데이터양의 증가로 발생되는 전송속도 저하를 개선하기 위하여 모바일 디바이스와 데이터베이스를 직접 연결하는 JTDS 기법을 적용하였다.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.430-437
• /
• 2020

This is an approach study on the sensory properties (taste and odor) of 15 types of Korean conventional soups and stews using electronic nose and tongue. The relative sensor intensity for the taste components of the samples using electronic tongue was demonstrated. By SRS (sourness) sensor, sogogi-baechuguk (beef and cabbage soup) had the highest rate of 9.0. The STS (saltiness) sensor showed the highest score of 8.2 for ojingeoguk (squid soup). For the UMS (umami) sensor, which identifies savoriness, the sogogi-baechuguk was the highest at 10.1. The SWS (sweetness) sensors showed relatively little difference, with sigeumchi-doenjangguk (spinach and bean paste soup) at the highest of 7.3. According to the BRS sensor, which tests for bitterness, the siraegi-doenjangguk (dried radish green and bean paste soup) was the highest at 7.8. By principal component analysis (PCA), we observed variances of 56.21% in principal component 1 (PC1) and 25.23% in PC2. For each flavor component, we observed -0.95 and -0.20 for factor loading of PC1 and PC2 for SRS sensors, 0.96 and 0.14 for STS sensors, and -0.94 and 0.22 for PC1 and PC2 for UMS sensors, and PC1 and 0.22 for PC1 and PC2 loading for SWS sensors. The similarity between the samples identified by clustering analysis was largely identified by 4 clusters. A total of 25 kinds of volatile compounds in 15 samples were identified, and the ones showing the highest relative content in all samples were identified as ethanol and 2-methylthiophhene. The main ingredient analysis confirmed variances of 28.54% in PC1 and 20.80% in PC2 as a result of the pattern for volatile compounds in 15 samples. In the cluster analysis, it was found to be largely classified into 3 clusters. The data in this study can be used for a sensory property database of conventional Korean soups and stews using electronic sensors.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.864-871
• /
• 2002

Acoustic emission(AE) technique has been applied to not only mechanical property testing but also on-line monitoring of the entire structure or a limit zone only. Although several AE devices have already been developed for on-line monitoring, the price of these systems is very high and it is difficult for the field to apply yet. In this study, we developed a specially designed PC-based leak detection system using A/D board. In this paper, AE technique has been applied to detect leak for heat exchanger by analyzing the characteristics of signal obtained from leak. It was confirmed that the characteristics of the signal generated by the turbulence of gas in the heat exchanger is narrow band signal having between 130-250kHz. Generally, the amplitude of leak signal is increased as the leak size increasing, but showed no significant change at frequency characteristic. Leak source location can be found by determining for the paint of highest signal amplitude by comparing with several fixed sensors. In this paper, AE results are compared with the PC-based leak detection system using A/D board.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.107-114
• /
• 2005

With the recent progress in flexible manufacturing systems (FMS) in industry, increasing attention has been given to Automatic Guided Vehicle (AGV) systems. An AGV is a self-powered unit for transporting materials between stations without needing to be controlled by an operator. Such a system has several sensors to recognize the external state, and it is designed to travel between stations automatically without external assistance. To manage each device automatically in real time it requires a distributed controller with a main computer as the host, as well as a number of micro-controllers. In this study, an AGV system with dual motor drive was constructed. A Pentium 4 personal computer was set up as the main host for the distributed control, and this communicated with other micro-controllers in the management of the motor. The speed of each motor was also controlled by a micro-controller.