• 한국지반신소재학회논문집
• /
• 제10권3호
• /
• pp.1-8
• /
• 2011

본 논문에서는 유리섬유시트 형태의 토목섬유로 보강된 아스팔트 포장의 내구성 증진효과와 공용성 평가를 위해 덧씌우기 시험시공 구간의 장기 추적조사를 수행하였다. 토목섬유 보강 아스팔트 포장의 보강효과를 비교하기 위해 개질아스팔트와 일반아스팔트 구간 및 토목섬유 보강 구간 등 6개 구간으로 구분하여 공용성 평가를 수행하였다. 공용성 평가를 위한 평가항목으로 소성변형, 균열율, 처짐량, 종단평탄성을 조사하였다. 공용성 평가를 위한 조사장비로 ARAN과 FWD를 이용하였으며, 또한 육안조사를 통해 시험시공 포장면의 균열발생과 변형상태 조사를 수행하였다. 추적조사결과, 토목섬유 보강 아스팔트는 토목섬유를 보강하지 않은 아스팔트 포장에 비해 균열저항성이 우수하며 공용기간이 증가함에 따라 소성변형과 균열이 서서히 증가하는 것을 알 수 있다.

• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.279-288
• /
• 2010

최근 도로포장 분야에서는 시공품질을 개선하기 위한 방편으로 성능보증 계약제도에 관한 연구가 진행되고 있다. 성능보증 계약제도는 시공회사에게 자유롭게 재료와 공법을 선택할 수 있는 기회를 부여하고 발주자가 제시하는 일정 수준 이상의 성능을 주어진 기간 동안 유지하게 하는 것이다. 성능보증 계약제도의 도입을 위하여 아스팔트 포장 분야에서는 성능보증 시방서에 포함될 성능인자와 임계한도에 관한 연구가 많이 진행된 상태이다. 그러나 고속국도뿐만 아니라 일반국도에서도 많이 시공되고 있는 콘크리트 포장 분야에서는 성능인자와 임계한도에 관한 연구가 부족한 실정이다. 본 연구에서는 유럽 국가와 미국 각 주의 성능보증 계약제도 사례에 관한 문헌을 검토하여 콘크리트 포장의 성능보증기간, 성능인자, 그리고 임계한도에 관한 조사를 실시하였다. 수원, 의정부, 예산, 충주, 전주, 포항, 남원, 진영, 정선, 영주, 진주, 홍천, 보은의 일반국도 13구간에서 줄눈 콘크리트 포장의 성능에 영향을 미치는 주요 파손을 조사하고 분석하여 해외의 성능보증기간, 성능인자, 그리고 임계한도와 비교하였다.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.9-18
• /
• 2016

PURPOSES : This study aimed to evaluate the performance of pavement management works and to develop a function for estimating the level of service (LOS) and cost of service (COS) for the systematic and quantitative management of pavement performance in the public sector. METHODS : The International Roughness Index (IRI) was used as the performance index for pavement management. Long-term pavement performance data for a period of 7 years (2007-2014) collected by the National Highway Pavement Management System and historical maintenance budget data published by the South Korean government were used to develop the LOS-COS function. Based on the function, a model for estimating the appropriate budget as well as the network conditions was suggested. RESULTS : There was high degree of correlation between pavement performance and the investment level (R = - 0.74). The developed LOS-COS function suggested that the unit cost to improve the network IRI to 1 m/km was 32.6 billion KRW. Further, the maintenance costs normalized with respect to the LOS levels were LOS-A = 88.2 billion KRW, LOS-B = 55.6 billion KRW, and LOS-C = 23.0 billion KRW. CONCLUSIONS : This study proposes a simple way of developing a LOS-COS function. It also shows how to develop a network budget demand and condition estimation model using the LOS-COS function. In addition, it is the first attempt to evaluate the road maintenance budget in South Korea. It is expected that these results will help in the negotiations between the road managers and budget makers.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.33-41
• /
• 2016

PURPOSES : This study primarily focused on evaluating the performance characteristics of 4.75-mm nominal maximum aggregate size (NMAS) asphalt mixtures for their more effective implementation to a layered flexible pavement system. METHODS : The full-scale pavements in the FDOT's accelerated pavement testing (APT) program, including 4.75-mm mixtures at the top with different thicknesses and asphalt binder types, were considered for the faster and more realistic evaluation of the rutting performance. The results of superpave indirect tensile (IDT) tests and hot-mix asphalt fracture mechanics (HMA-FM) based model predictions were used for cracking performance assessments. RESULTS : The results indicated that the rutting performance of pavement structures with 4.75-mm mixtures may not be as good as to those with the typical 12.5-mm mixtures, and pavement rutting was primarily confined to the top layer of 4.75-mm mixtures. This was likely due to the relatively higher mixture instability and lower shear resistance compared to 12.5-mm mixtures. The energy ratio (ER) and HMA-FM based model performance prediction results showed a potential benefit of 4.75-mm mixtures in enhanced cracking resistance. CONCLUSIONS : In relation to their implementation, the best use of 4.75-mm mixtures seem to be as a surface course for low-traffic-volume applications. These mixtures can also be properly used as a preservation treatment that does not necessarily last as long as 12.5-mm NMAS structural mixes. It is recommended that adequate thicknesses and binder types be considered for the proper application of a 4.75-mm mixture in asphalt pavements to effectively resist both rutting and cracking.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.75-86
• /
• 2013

PURPOSES: The purpose of asphalt pavement reducing surface temperature by using Pipe cooling system is to make pleasant city life environment. METHODS: We considered building condition to lay the pipes under asphalt pavement and figured out that temperature reducing effect with pipe cooling system. In addition, we guessed rutting through wheel tracking test with a laid the pipes under asphalt mixture and performed fatigue cracking through a flexural fatigue test for performance evaluation of pipe cooling system. RESULTS: When pipe cooling system worked, the temperature of pavement model reduced quickly in test. The system can turn down the degree by 4 or 5 quickly as well. It didn't affect rutting to lay the pipes under the pavement, but it can get damaged to asphalt pavement in early stage by the result of performance evaluation. CONCLUSIONS: We figured out that pipe cooling system can turn down the temperature of aspalt pavement surface through tests. We suggest that pipe cooling system should be considered one of the effective way to solve urban heat island problem.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.73-81
• /
• 2012

PURPOSES : The purpose of this study is to select the proper sealing method and to see the performance of the saw and seal method for concrete rehabilitation based on accelerated pavement testings and lab tests. METHODS : Two accelerated pavement testings were conducted. One is to select proper sealing method of the asphalt joints and the other is to see the performance of the saw and seal method. Lab tests were conducted to select proper sealing method and a test section was constructed to see the field performance. RESULTS : The result of the first accelerated pavement testing indicated that the adhesive preformed sealants showed good performance when asphalt layer was rutted and in terms preventing from water infiltration. The second acceleration test indicated that the saw and seal method using the adhesive preformed sealant showed much better performance than the control. In the lab test bitumen, rubber and epoxy showed good performance as the adhesive. CONCLUSIONS : Saw and Seal method using the adhesive preformed sealant would markedly reduce the joint damage on the asphalt overlay.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.83-90
• /
• 2016

PURPOSES : Nowadays, cavity phenomena occur increasingly in pavement layers of downtown areas. This leads to an increment in the number of potholes, sinkholes, and other failure on the road. A loss of earth and sand from the pavement plays a key role in the occurrence of cavities, and, hence, a structural-performance evaluation of the pavement is essential. METHODS: The structural performance was evaluated via finite-element analysis using KPRP and KICTPAVE. KPRP was developed in order to formulate a Korean pavement design guide, which is based on a mechanical-empirical pavement design guide (M-EPDG). RESULTS: Installation of the anti-freezing layer yielded a fatigue crack, permanent deformation, and international roughness index (IRI) of 13%, 0.7 cm, and 3.0 m/km, respectively, as determined from the performance analysis conducted via KPRP. These values satisfy the design standards (fatigue crack: 20%, permanent deformation: 1.3 cm, IRI: 3.5 m/km). The results of FEM, using KICTPAVE, are shown in Figures 8~12 and Tables 3~5. CONCLUSIONS: The results of the performance analysis (conducted via KPRP) satisfy the design standards, even if the thickness of the anti-freezing layer is not considered. The corresponding values (i.e., 13%, 0.7 cm, and 3.0 m/km) are obtained for all conditions under which this layer is applied. Furthermore, the stress and strain on the interlayer between the sub-grade and the anti-freezing layer decrease gradually with increasing thickness of the anti-freezing layer. In contrast, the strain on the interlayer between the sub-base and the anti-freezing layer increases gradually with this increase in thickness.

• 한국지열·수열에너지학회논문집
• /
• 제19권2호
• /
• pp.8-19
• /
• 2023

Hydronic heated road pavement (HHP) systems have well studied and documented by many researchers. However, most of the systems run on asphalt, only a few are tested with concrete, and there rarely is a comparison between those two common road materials in their heating and cooling performance. The aim of this study is to investigate the thermal performance of the HHP, such as heat dissipation performance in winter season while focusing on the surface temperature of the concrete and asphalt pavement. For preliminary study a small-scale experimental system was designed and installed to evaluate the heat transfer characteristics of the HHP in the test field. The system consists of concrete and asphalt slabs made of 1 m in width, 1 m in length, and 0.25 m in height. In two slabs, circulating water piping was embedded at a depth of 0.12 m at intervals of 0.16 m. Heating performance in winter season was tested with different inlet temperatures of 25℃, 30℃, 35℃ and 40℃ during the entire measurement period. The results indicated that concrete's heating performance is better than that of asphalt, showing higher surface temperatures for the whole experiment cases. However, the surface temperature of both concrete and asphalt pavement slabs remained above 0℃ for all experimental conditions. The heat dissipation performance of concrete and asphalt pavements was analyzed, and the heat dissipation of concrete pavement was greater than that of asphalt. In addition, the higher the set temperature of the circulating water, the higher the heat dissipation. On the other hand, the concrete pavement clearly showed a decrease in heat dissipation as the circulating water set temperature decreased, but the decrease was relatively small for the asphalt pavement. Based on this experiment, it is considered that a circulating water temperature of 20℃ or less is sufficient to prevent road ice. However, this needs to be verified by further experiments or computational fluid dynamic (CFD) analysis.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.135-144
• /
• 2008

주행하는 차량이 도로포장에 가하는 동적 하중은 포장표면의 거칠기에 따라 그 크기가 변화하게 되며 설계하중보다 큰 하중이 재하 될 경우에는 포장의 공용성에 영향을 미치게 된다. 따라서 본 논문에서는 포장표면의 평탄성에 대한 지불규정을 시방에 적용하여 포장의 성능 및 품질향상을 도모하기 위한 기본연구로써 도로포장의 표면에 거칠기가 있을 때 주행차량에 의한 동적 하중 크기의 변화를 분석하였다. 먼저 평탄성이 좋지 않은 오래된 포장과 평탄성이 좋은 새로운 포장에서 구한 평탄성 데이터를 이용하여 구조해석을 수행함으로써 이러한 포장에서 차량이 주행할 때 동적 하중의 크기 변화를 비교 분석하였다. 그리고 차량속도와 표면 거칠기의 진폭 및 파장이 차량 동적 하중 크기에 미치는 영향을 가상의 평탄성 데이터를 구성하여 분석하였다. 이러한 표면 거칠기에 의한 동적 차량하중 크기의 증가는 포장의 응력 및 변형률에 영향을 미치며 궁극적으로 포장의 공용성과 연관되기 때문에 표면 거칠기와 포장의 공용성과의 관계를 유출하는 방법을 제시하였다

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.1-11
• /
• 2012

PURPOSES : The purpose of the study was to examine dynamic features of concrete after mixing a little macro fiber with small aspect ratio and long length utilized for bridge, tunnel and shotcrete for tensile performance and crack control in domestic/overseas countries with cement concrete pavement mix. METHODS : Coarse aggregates with small aspect ratio and macro fibers with maximum length of approximately 32 mm are introduced in small quantities in the mix proportions of concrete pavement so as to prevent loss of the workability. Then, this study intends to evaluate the applicability of macro fibers in the mix proportions of concrete pavement by examining the basic construction performance, as well as the change of toughness, the equivalent bending strength and the flexural toughness index caused by compression, bending, tension and the flexural stress-displacement curve. RESULTS : As the results, in each kind of macro fiber, polyvinyl alcohol fiber and steel fiber displayed a good performance. CONCLUSIONS : In 0.2 and 0.3% of fiber contents, it is appeared that polyvinyl alcohol fiber has a large effect on improvement of tensile performance and steel fiber on improvement of deforming performance of bending stress.