• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.8-15
• /
• 2003

This study was carried out to investigate the dimensional stability of wood treated with PEG for better utilization of domestic small-diameter logs. Four species of ring- porous wood(Quercus mongolica F_ISCH, Quercus variabilis B_LUME, Fraxinus rhynchophylla H_ANCE, Paulownia coreana U_YEKI,) and four species of diffuse-porous wood(Prunus sargentii R_EHDER, Betula davurica P_ALL, Populus tomentiglandulosa T. L_EE, Cornus controversa H_EMSLEY) were used for this experiment. The shrinkage of wood decreased with increasing the concentration of PEG. The shrinkage of diffuse- porous woods was lower than that of ring-porous woods. The weight gain increased in proportional to the PEG concentration. Diffuse-porous woods showed a little higher weight gain than ring-porous woods. Bulking effect also increased with increasing the PEG concentration, but was in inverse proportional to the molecular weight of PEG. Diffuse-porous woods showed higher bulking effect than ring-porous woods. Consequently, diffuse-porous woods showed better dimensional stability than ring- porous woods. It was considered that dimensional stability was affected by characteristics of wood such as vessel and tylosis, and density.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.1-15
• /
• 1987

This experiment was undertaken for the purpose of investigation of relative durability about thirty sorts of the korean native wood and nine sorts of the wood destroying fungi Polystictus versicolor, Irpex consors. Poria vaporaria, Merulius lacrymans, Schizophyllum commune, Trametes pini, Lenzites betulina, Paxillus panuoides by means of a laboratory methods. The results obtained are; (from the table 2 to 10) 1. By measuring the percentage of loss in weight with regard to Polystictus versicolor, the sap wood contained in Junipeus chinesis was calculated at 18.2%, therefore it is much higher durability than any others and the sap wood contained in Pinus densiflora was measured at 44.10%, therefore it is much lower durability than any others. 2. By measuring the percentage of loss in weight with regard to Irpex consors, the heart wood contained in Butula schmidtii was calculated at 1.23%, therefore durability is very high and the heart wood contained in Quercus dentata was calculated at 26.79%, therefore durability is very low. 3. By measuring the percentage of lass in weight with regard to Lenzites betulina, the heart wood contained in Betula schmidtii was calculated at 5.33%, therefore it is much higher durability than any others and the sap wood with regard to Abies holophylla was measured at 45.48%, therefore durability is very low. 4. By measuring the percentage of loss in weight with regard to Poria vaporaria, the sap wood contained in Fraxinus rhynchophylla was calculated at 5.57%, therefore durability is very high and the sap wood contained in Paulownia coreana was calculated at 35.6%, therefore it is much lower durability than any others. 5. By measuring the percentage of loss in weight with regard to Merulius lacrymans, the heart wood contained in Castanea crenata was measured at 0.09% and in the next place, the heart wood contained in Abies holophylla calculated at 0.15% did not decay almost and the sap wood contained in Cornus controversa was measured at 32.88%, therefore it is lower durability than any others. 6. By measuring the percentage of loss in weight with regard to Schizophyllum commune, the sap wood cantained in Junipensis chinensis was calculated at 1.09%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 36.87%, it is much lower durability than any others. 7. By measuring the percentage of loss ill weight with regard to Trametes pini, the sap wood contained in Robinia pseudo-acacia was calculated at 1.33%, therefore durability is very high and the sap wood contained in Comus controversa was calculated at 33.19%, it is much lower durability than any others. 8. By measuring the percentage of loss ill weight with regard to Paxillus panuoides. the heart wood contained in Zelkova serrata was calculated at 1.73%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 42.30%, therefore durability in very low. 9. By measuring the percentage of loss in weight with regard to Dardalea quercina, the heart wood contained in Castanea crenata was calculated at 0.92%, therefore durability is very high and the sap wood contained in Cornus controversa was calculated at 32.00% therefore durability is very low. The above results are summarized as follows 1. Durability between the heart wood and the soft wood find that it is nonsignificant, while durability is higher heart wood than sap wood. 2. Special sorts including in the element like Castanea cenata, Robinia pseudo-acacia, Juniperus chinensis and heart wood like Betula schmiditii and Styrax obasia are highly durable and soft wood like Cornus controversa, Populus davidiana, Salix koreensis, Celtis jessensis are lowly durable in general. 3. Among the wood destroying fungi Paxillus panuoides is highly durable and as follows. Poria vaporaria, Lenzites betulina and the Daedalea quercina is less in general and Irpex consors, Mersulius lacrymans are a middle degree.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.87-94
• /
• 2002

This study was carried out to evaluate bending property on principal domestic species such as sargent cherry(Prunus sargentii), bitter wood(Picrasma quassioides), horn beam(Carpinus laxiflora), cork oak(Quercus variabilis), birch(Betula schmidtii), painted maple(Acer mono), basswood(Tilia amurensis), red pine(Pinus densiflora), pitch pine(Pinus rigtda), royal pawlonia(Paulownia tomentosa) by microwave heating. In this study, radius of curvature(ROC) for bending process was classified by radius of curvature(ROC) of bending plate such as 4 cm, 6 cm, and 10 cm, and thickness of metal-strap(TMS) was 0.6 mm and 0.8 mm. Bending process was successfully operated for 100 percent in bitter wood, horn beam, birch and painted maple. On the other hand, there was a success rate of 58 percent in sargent cherry and 83 percent in cork oak and 29 percent in basswood and 8 percent in royal pawlonia which is the worst bending property. All specimens of basswood and royal pawlonia were broken at 4 cm of ROC. Success rate of bending property was shown 44 percent in red pine and 56 percent in pitch pine. TMS has an effect on only drying speed in drying process than difficulty and facility of bending property. It was considered that the thinner TMS in drying process is the faster in drying speed of bent wood.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.486-498
• /
• 2010

The purpose of this study was to analyze the species of 82 furniture in the late Choseon Dynasty (mainly, 19th century), which are housed in the Seoul Museum of History. Total of 22 species were found. The species shared 43% as hard pine(Diploxylon), 9% as Zelkova serrata Makino, 7% as Paulownia spp., 7% as Tilia spp., 6% as soft pine(Haploxylon), 5% as Ginkgo biloba Linn., 4% as Cedrela sinensis A. Juss., 3% as Diospyros spp., 3% as Abies spp., 2% as Alnus spp., 2% as Picea spp., 1% as bamboo, 1% as Populus spp., 1% as Betula spp., 1% as Juglans spp. The other minor ones were Torreya nucifera Sieb. et Zucc., Pyrus spp., Castanea spp., Ulmus spp. and Kalopanax oictuse (Thunb.) Nakai. Thirty seven furniture (45% in total) was made of single species, 19 (23%) of two species, 16 (20%) of three species and 10(12%) of 4 to 6 species. For frames and panels, hard and strong woods, such as hard pines, Zelkova and Cedrela, were used. For drawer, however, light woods having low shrinkage, such as Paulownia and Tilia, were used. The origin of woods could be specified by the habitats of the species identified. Both Hwanghaedo- and Parkcheon- Chests used basswood (Tilia), which grow in the cold regions, indicating the origin of woods as North Korea.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.373-380
• /
• 2022

In this study, Chung's equations 1, 2, and 3 were extended to standardize smoke safety rating evaluation in case of fire, and Chung's equations-V, smoke performance index-V, and smoke growth index-V were calculated. Five types of wood were selected and their smoke indices were measured using the cone calorimeter method according to ISO 5660-1. The smoke risk was graded by the smoke risk index-VI according to Chung's equation-VI. Smoke risk index-VI increased in the order of PMMA (1) ≈ maple (1.01) < ash (1.57) < needle fir (4.98) < paulownia (46.15) < western red cedar (106.26). It was predicted that maple and ash had the lowest smoke risk, and paulownia and western red cedar had the highest. The five samples' CO mean production rate (COP_mean) was 0.0009~0.0024 g/s, indicating that these woods were incompletely burned than the polymethyl methacrylate (PMMA) reference material. Regarding the smoke properties of the chosen woods, the smoke performance index-V (SPI-V) increased as the bulk density increased, and the smoke risk index-VI (SRI-VI) decreased.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.617-621
• /
• 2016

On-site survey on glue-laminated board (GLB) manufacturers of Malaysia, Indonesia, and China was conducted to identify the cause of interception of regulated pest from imported GLBs from those countries, and to suggest optimal manufacturing processes of GLB for preventing quarantine risk associated with imported GLBs. The cause of pest interception was improper manufacturing processes, such as air drying or inadequate kiln drying of green laminae, improper storage of dried laminae before finger jointing and edge gluing, and/or incomplete packing of GLBs. In particular, Paulownia GLB manufacturing processes used in China, including air drying of laminae, were mostly poor in terms of preventing quarantine risk associated with imported GLBs. From now on, for preventing quarantine risk associated with imported GLBs, importers have to ask foreign manufacturers spontaneously to use proper manufacturing processes (adequate kiln drying of green laminae, proper storage of dried laminae, and complete packaging of final GLBs).

• Conservation Science in Museum
• /
• v.2
• /
• pp.9-17
• /
• 2000

This is a case study of conservation treatment of the textiles and costumes excavated from Soonchun Park's tomb in Eumsung, North Chungcheong province. When excavated, the objects were found fairly wet and badly smelled since they decayed in wooden coffin. They were wet-treated with deionized water to remove dirt and dried at room temperature, during which the objects were blocked and flattened to keep them in shape. Silk crepeline was under-layed and stitched to the damaged areas with silk-hair threads. Each costume was individually stored in a tray made of paulownia wood and flat textiles were rolled up in paper cylinders with 6 and 10 cm in diameter. Thymol was used to prevent microorganisms.

• Journal of the Korea Furniture Society
• /
• v.26 no.2
• /
• pp.138-144
• /
• 2015

Among several thermal wood modification methods German oil heating technology was applied for color changing larch and paulowniawood specimens. They were heat treated at $200^{\circ}C$ for 3 hours in an autoclave filled with linseed oil. The CIE $L^*a^*b^*$ color indexes of the shells and cores of the oil heated specimens were measured. The color difference indexes between the oil heated and the control specimens of larch and paulowniawood were in the range of 6 and 12, which implies considerably different. The color difference indexes between the core layers of the larch and paulowniawood specimens were 4.3 and 1.7, respectively. It could be concluded that the specimens of the two species were color changed uniformly by oil heating.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.17-26
• /
• 2007

This study was conducted to investigate the effects of End-coating (CO) treatment and Vapor-dam (V) treatment on the air circulating oven drying characteristics of green stock (Paulownia tomentosa) for drum. The reduction of the weight of specimens was greatly displayed in order of control (C-NC) treatment, End-coating (C-CO) treatment, Vapor-dam (V-NC) treatment and Vapor-dam/End-coating (V-CO) treatment after the beginning of drying. The V-CO treated specimen showed smoother temperature gradient compared with the V-NC treated specimen throughout whole drying stage and there was little temperature gradient between the inner and outer part of the cylindrical stock. The C-CO treated specimen showed higher value of vapor pressure in both the inner and outer part of the cylindrical stock until the middle stage of drying, while after the middle stage of drying only the inner part of the cylindrical stock presented higher value compared with the C-NC treated specimen. The distribution of the absolute vapor pressure of the V-CO treated specimen was similar to that of the V-NC treated specimen during the initial stage of drying. However, the former showed a large distribution in order of the hollow, the outer part, the inner part of the cylindrical stock after the initial stage of drying, which was entirely different model of distribution from that of the V-NC treated specimen. Surface checks and ring failures were not observed for all of the specimens, while end checks were severely occurred for the C-NC treated specimen and the V-NC treated specimen.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.415-424
• /
• 2015

This research was conducted to reveal the characteristics of breeding ecology of oriental scops owl (Otus sunia stictonotus) inhabiting in South Korea according to the nest types during the breeding season from march to October for two years (2011 and 2012). Oriental scops owl nested in woodpecker's nest holes (46.1%), natural tree holes (38.5%), and artificial wood boxes (15.4%). These nests were located on following trees: Zelkova serrata, Paulownia coreana, Celtis sinensis, Salix chaenomeloides, Salix babylonica, Fraxinus rhynchophylla, Robinia pseudoacacia and Platanus occidentalis. The hatching success was 91.4%, fledging success was 83.0%, and breeding success was 75.9%. The factors of the breeding failure were falling (57.1%), abandonment (28.6%), hatching failure (7.1%), and others with unknown cause of death (7.1%). According to nest types, the fledging success (69.2%) of woodpecker's nest holes were low and the hatching success (79.2%) of natural tree holes were also low due to hatching failure and abandonment. However, hatching success, fledging success, breeding success were high in the artificial nests as all the eggs hatched and succeeded in fledging. Therefore, we suggested that artificial nests can cover the weaknesses of natural nests as well as increasing the breeding success. However, long-term research on installation place, height, and hole sizes of the artificial nest are required in order to clearly reveal the effects on the breeding success of oriental scops owl.