• 한국의류학회지
• /
• 제29권7호
• /
• pp.1018-1026
• /
• 2005

Recent development of 3D scanner and software is regarded as a promising method of acquiring replicas from human body indirectly. It would be very helpful if we could predict the characteristics of 2D pattern from the simple parameters related to 3D shape for ordinary user. Therefore, in this study, investigation of 2D pattern of waist/abdominal area from the 3D geometrical model was conducted for the pattern development of waist nipper. To create body models and develop the surface of them, one ortho commonly used CAD/CAM program, IDEAS(UGS-plm solutions, USA) was used. As for the size of the models, the width, thickness, and circumference ranges of adult women's torso reported in National Anthropometric Survey of Korea (1997) were used as a standard model. Seven size variations were made by changing the width of the waist only, from 19 cm to 40 cm. Therefore, simulated body models include not only the normal body but also obese body who has wider waist and abdomen width than hip width. As results, it was found that the curvature of the unfolded 2D pattern around the abdominal area decreases as the waist width increases. As the width of the waist increases more and more, so that the comparative ratios around the torso becomes in abnormal ranges, there appears inflection points and the direction of curvature was changed. 2D Patterns obtained in this research were quantified by curvature, length of the curve and angle of deflection in the reference frame box for the convenience of the actual pattern making process. It was also possible to find that the shape of patterns of abnormal body resulted in a quite interesting change in the curves of 2D pattern, which could be applied to the custom made waist nipper for obese women.

• 복식문화연구
• /
• 제19권2호
• /
• pp.245-254
• /
• 2011

The purpose of this study was to develop uniform pattern of obese junior-high school girls by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, by using 3D virtual garment simulation, new uniform pattern considered obese junior-high school girls was development. The basic numerical formula were as follows; bust girth=B/2+2.5, armhole depth=B/4, front waist girth=W/4+1.8, back waist girth=W/4+1, front hip girth=H/4+1, back hip girth=H/4+1, chest width=chest width+1.5, back width=back width+1 and back neck width 8cm. Second, according to the results of the new uniform pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new uniform pattern is appropriate for the obese junior-high school girls. Also, new uniform pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• 복식
• /
• 제51권7호
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• 한국의류학회지
• /
• 제27권1호
• /
• pp.48-59
• /
• 2003

The purposes of this research lie in developing dress shirts pattern targeting adult males between 25-34 years of age and presenting the rules of grading according to the real circumstances of dress shirts industry. The findings of this research are as follows: 1. The surveyed companies kept different size systems ranged from 5 to 18. They kept different size systems each other, and the pattern making was conducted by modification of the collar size, chest size, etc of the pattern developed through each company's know-how. All the surveyed companies were using point method of grading. 2. The method of the research pattern was to adopt N/6+1(cm) for the width of the back of the neck. N/6 for the front neck, N/6+2 for the depth of the front neck, B/6+7 for the shoulder width, B/6+5.5 for the breast width, B/4+5 for the whole width (back), B/4+4 for the whole width (front), B/4+3.5 for the depth, AH/2+0.5 for the back arm hole, AH2+1 for the front arm hole. 3. The grading rule was made after classifying the sizes into 14 centered on the standard size 40. Through the wearing test of research grading rule, 1 found the suitability of grading size 36 and 43 satisfiable.

• 복식문화연구
• /
• 제12권2호
• /
• pp.290-299
• /
• 2004

The purpose of this study is to testify the pattern making method to develop the men's basic bodice pattern using 3-dimensional body scan data. The experimental patterns were made by adding wearing ease on flattened body scan data and tracing the outlines of it. The experimental bodice pattern were composed of front, back, and side panels. To compare the difference between the experimental pattern and traditional pattern, two pattern making methods were compared. Two sets of basic bodice patterns were made for each of the 10 male subjects: a set of pattern was made by experimental method and the other set was made by Bunka pattern making method. The experimental and traditional patterns were measured at 13 dimensions. The results show that there was a difference between the experimental patterns and traditional patterns at the front length, back length, front width, front neck width, back neck width, and back neck depth. The fit was also compared for both patterns. The results of the fit test show that the experimental patterns were superior to the traditional patterns at the fit of neck, shoulder, and armhole. The experimental pattern making method was expected to be useful for mass customization.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.438-446
• /
• 1999

Crop minimization of the top and bottom ends of hot rolled plate, in a plate, in a plate mill, has been investigated. The existing model to determine the edging pattern at the finishing rolling pass was not reasonable to get high width accuracy and rolling yields. New models including width prediction have been formulated by using neural network model of back propagation learning algorithm and statistical analysis based on the actual production rolling data to give the optimal pattern for minimizing trimming loss. Using these models, at a given rolling condition of broadside pass and finishing pass and the permissible condition of width variation, it was possible to minimize crip at the top and bottom ends according to optimum procedure in plate mill. An application to improve the plan view pattern reduced width variation by 23% and crop length by 30% on average with an effective fishtail crop shape.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.1-15
• /
• 2006

The purpose of this research is to find out the effect of clothing style and mixtures of stripe pattern direction, width, and coloration of an upper garment. The experimental materials made for this study are a set of stimuli and response scale(The 7-Point semantic). The subjects were 480 female undergraduate students in Seoul, Busan, Gyung-nam. The 80 stimuli which were variously incorporated with clothing styles and stipe patterns were assessed by the students. The following contents summarizes the results of the research. Impression factors of the stimuli consists of the 5 dimensions(Attractiveness, Show, Activity, Clearness, mildness). Amon these, the Attractiveness and Show dimensions proved to be more important. The clothing style and pattern direction indicated main effect in attractiveness and activity dimension. The pattern coloration showed a significant effect in dimensions except attractiveness and clearness. The pattern width had a significant effect only in the activity. Significant interaction effects of each clothing clause were found in the attractiveness, activity and clearness, but Show and mildness had no significant interaction effect. This research, as the 06 S/S, F/W trend, is a meaningful study in that it handled in the form of expression the stripe pattern used unrestrictedly in the casual wear or the formal wear by a fashion keyword.

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.919-928
• /
• 2010

연속주조 시에 폭변경 속도를 향상시키기 위해 폭조정의 4 가지 패턴에 대해 연구하였다. 주요 사항은 폭변경 장치의 구동력을 최소화하고, 몰드 내의 응고막의 변형해석 모델을 개발하고, 폭변경 속도 상승을 제한하는 주요인자를 도출하는 것이다. 폭변경 실험을 근간으로 4 개 패턴의 주요 특징을 도출하였고, 각 패턴에 대한 힘을 비교하였다. 실험은 각 패턴의 구동력 비교를 위해 동일한 주조속도에서 수행하였다. 응고막변형 해석모델의 변수를 조정하기 위해 실험결과를 모델에 적용하였다. 폭변경 속도를 상승시키고, 구동력을 저감시키기 위해 패턴의 변수를 제어하였다. 가장 효율적인 패턴은 고속패턴이었으며, 구동력을 저감하기 위한 주요인자는 구동장치가 이동할 때의 기울기였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.502-505
• /
• 2005

To overcome some of the limitations in the conventional photolithography technique, MC-SPL which has advantages such as flexibility and high speed was developed in the past. To make a fine pattern using MC-SPL, there are many variables to control, for example, applied load, scribing speed, chemical etching condition, and etc. In this work, the effect of contact load on the width of the pattern was investigated. The load not only influences the width of the pattern but it also affects the wear of the probe tip. It was found that it is beneficial to load the tip in two stages. Futhermore, the experimental results showed that the pattern width was more sensitive to the initial contact force.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1275-1282
• /
• 2005

This paper deals with the numerical study for excavation crossing the fault zone and the change of support pattern in field. The numerical analyses by FLAC program were performed to evaluate the suitable support pattern influenced by the width of Fault Zone, considering rock mass condition(RMR classification). Based on the results, it is found that partial reinforcement or degrading support pattern is suitable, when the width of Fault is under 3m. But when the width of Fault is more than 6m(0.5D), extra support pattern for fault zone is acceptable. At field, this result is generally used as a guide in the construction of roadway tunnel, but it is also possible to vary this assessment along the condition of fault.