• 동의생리병리학회지
• /
• 제36권5호
• /
• pp.147-154
• /
• 2022

In order to secure practising rapid pattern(證, zheng) differentiation against acute infectious diseases like corona virus disease-19(COVID-19) showing rapid variation and contagion, a simplified classification of stages centering on the exterior-interior pattern identification with 2 step-subdivision by cold, heat, deficiency, excess pattern and pathogens is proposed. Pattern differentiation by compound patterns of 8 principles is made for the non-severe stage of general cold and the early mild stage of epidemic disease. Compound pattern's names of 8 principles about external infectious diseases are composed of three stages, that is disease site-characters-etiology. Based on early stage symptoms of fever or chilling etc., exterior, interior and half exterior and half interior patterns are determined first, and then cold, heat, deficiency, excess patterns of exterior and interior pattern respectively are determined, and then more concrete differentiation on pathogens of wind, dryness, dampness and dearth of qi, blood, yin, yang accompanied with constitutional and personal illness factors. Summarizing above descriptions, 4 patterns of exterior cold, exterior heat, exterior deficiency, exterior excess and their secondary compound patterns of exterior cold deficiency and exterior cold excess and so on are classified together with treatment method and available decoction for a standard measure of eight principle pattern differentiation.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.87-95
• /
• 2015

In this study, the temporal and spatial variation in precipitable water vapor (PWV) was analyzed for typhoon Ewiniar which had made landfall in the Korean peninsula in 2006. To make a contour map of PWV, zenith total delay (ZTD) was calculated using about 60 GPS permanent stations in Korea, and the pressure and temperature data of nearby AWS stations were interpolated and applied to the equation for calculating the PWV. While Typhoon Ewiniar was migrating north from the southern coast to the eastern coast of Korea, the PWV migrated showing a spatial distribution similar to that of rainfall. Also, the fluctuating pattern of the normalized PWV was analyzed, and the moving speed of the PWV was estimated using the delay time of the increase/decrease pattern in the eight-test stations. The result indicated that the moving speed of the PWV was about 35 km/h, which was similar to the average moving speed of the typhoon (38.9 km/h).

• 한국연소학회지
• /
• 제4권1호
• /
• pp.141-153
• /
• 1999

Numerical analysis for the combustion flow in the combustion chamber of incineration system has been carried out in order to acquire the basic design capability of incineration system. Established mathematical model was applied to the performance prediction of the pre-designed combustion chamber of commercial plant. Especially, combustion characteristics and the variation of flow pattern have been deeply discussed in accordance with secondary air injection. Secondary air injection was effective for the turbulent mixing between air and carbon monoxide/volatile matter resulting in considerably reduced CO content at the exit. Secondary air injection was found to be one of the key design parameters because the size of recirculation zone could be changed with the variation of injection characteristics.

• 한국농공학회지
• /
• 제42권1호
• /
• pp.66-72
• /
• 2000

A study was conducted to find distribution patterns of minisprinkler without a bridge for the desing of microirrigation systems. The experiments were executed in a plastic house to minimize the effect of the wind. Data were collected at four different operation pressures and at 3 different riser heights. Sprayed water were collected by aluminium cans with 65mm diameter and 100mm height placed at 0.3m grid spacing . A schematic distribution pattern with distance from a minisprinkler was suggested for the layout design of the minisprinkler. Distribution pattern of the minisprinkler was found irregular in space. Distributin performance characteristics of the minisprinkler such as effective radius. , effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. It was indicated that there is a trend of decrease in variation coefficient adn better water distribution by the increase in operation pressures and riser heights.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.255-258
• /
• 2003

Agricultural water use occupies 60% of the total water use in Korea, so variation of the farming pattern and the efficiency of agricultural water use is important for the sustainable water management. For the analysis of agricultural water use, the Yi-dong experimental site was selected. For the monitoring system of the experimental site, four rainfall gauging stations and twenty-six water level gauging stations are established and operated. Analyses of the measured data are processed for the irrigation efficiency of agricultural water and the effect of the variation of farming pattern.

• 정보처리학회논문지B
• /
• 제8B권2호
• /
• pp.195-200
• /
• 2001

본 논문에서는 실제 입력 차량 영상으로부터 명암도 변화 정보와 원형 패턴 벡터를 이용하여 차량 번호판을 인식하는 알고리즘을 제안하였다. 일반적으로 차량 영상에서는 번호판 영역에서 문자와 배경이 뚜렷하게 구별되고, 일정한 명암도 변화를 가지면서 번호판 이외의 다른 영역 보다 빌집도가 높은 특성이 있다. 따라서 본 논문에서는 이러한 성질을 이용하여 먼저 명암도 변화값을 사용하여 번호판을 추출하도록 하였으며 영상 입력 과정에서 외부 환경에 따라 차량 영상이 어둡거나 밝게 입력될 경우에도 동일한 추출 성능을 얻기 위하여 밝기 보정 과정을 수행하였다. 또한 추출된 번호판 영역으로부터 입력 문자의 크기, 이동 및 회전에 무관한 특성 추출을 위해 원형 패턴 벡터를 이용하여 차량 번호를 인식하도록 하였다. 제안한 알고리즘을 적용한 결과 번호판 추출이 가능하였으며 기존의 방법에 비해 계산 속도가 향상되어 실시간 처리의 가능성을 제시하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.159-164
• /
• 2000

In order to clarify the seasonal variation of residual current and material transportation process in Hiroshima Bay, JAPAN, the real-time simulation of residual current and particle tracking by using Euler-Lagrange model were carried out. The calculated tidal current and water temperature and salinity showed good agreement with the observed ones. The residual currents showed the southward flow pattern at the upper layer, and the northward flow pattern at the lower layer. The flow structure of residual current in Hiroshima Bay is an estuarine circulation affected by density flow and wind driven current. The residual current plays an improtant role of material transportation in th bay.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.45-50
• /
• 2000

A numerical investigation is made of three-dimensional buoyant convection of a Boussinesq-fluid in a vertical cylinder. The top and bottom endwalls are thermally insulated. Flow is driven by the substantial azimuthal variations in thermal boundary conditions. Comprehensive numerical solutions to the Navier-Stokes equations are obtained. The representative Rayleigh number is large, thus, the overall flow pattern is of boundary layer-type. Three-dimensional (low characteristics are described. Specially, the global flow and the heat transfer features are delineated when the severity of azimuthal variation of sidewall temperature n, is intensified. Temperature and velocity fields on the meridional planes and the planes of constant height are presented. The global flow weakens as n becomes large. The pattern of the local Nusselt number on the surface of cylinder is similar regardless of n. The convective gain in heat transfer activities is reduced as n increases.

• 한국음향학회지
• /
• 제21권5호
• /
• pp.485-493
• /
• 2002

수심이 변하는 천해 환경에서 이동하는 선박방사소음의 광대역 간섭 유형을 고찰하였다. 수심 변화율이 일정한 음도파관에 대해 단열 모드 이론에 근거하여 거리-주파수 영역에서의 보강 (또는 상쇄) 간섭 발생 유형을 나타내는 음도파관 불변인자 (waveguide invariant index, β)를 유도하였다. 이를 이용하여 수심 변화에 의한 광대역 간섭 형태 변형을 해석하였다. 해석적 방법으로 고찰한 간섭 유형은 해상 실험과 수치 모델을 이용한 모의실험에서도 나타남을 확인하였다.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.7-14
• /
• 2023

In this study, we investigated the freezing delay time on surfaces with different patterns under -30° conditions through visualization experiments. Among various pattern structures, we fabricated the shape and surface of liquid from the spacing using circular filaments and hole structures. Additionally, using a high-speed camera, we visualized the freezing scenes, enabling us to obtain freezing images and measure the freezing time of the liquid. For each structure, the contact angle and solid fraction of the surface varied. We observed that the freezing delay time was longest when the contact angle was largest and the solid fraction was smallest within the experimental results. We analyzed the variation in anti-icing time using the heat exchange equation between the patterned surface and the liquid.