• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.509-516
• /
• 1999

The ESPI (Electronic Speckle Pattern Interferometry) algorithm has been simulated to calculate vibrational modes of a thin right-angled STS304 plate. The phase transformation of the reference wave of the ESPI is carried out only one time during vibration in order to clarify ESPI speckle patterns. Two dimensional vibrational modes are calculated from one ESPI pattern before vibration onset and two ESPI patterns during vibrations but with and without the phase transformation. The ESPI harmonic results are compared with those derived from the finite element method (FEM), and they agree very well. Additionally a phase unwrapping algorithm has been newly developed to derive a displacement map from an ESPI phase map.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.548-555
• /
• 2000

The dynamic walking and the inverse dynamics of the biped walking robot is investigated in this paper. The biped robot is modeled with 14 degrees of freedom rigid bodies considering the walking pattern and kinematic construction of humanoid. The method of the computer aided multibody dynamics is applied to the dynamic analysis. The equations of motion of biped are initially represented as terms of the Cartesian coordinates, then they are converted to the minimum number of equations of motion in terms of the joint coordinates using the velocity transformation matrix. For the consideration of the relationships between the ground and foot, the holonomic constraints are added or deleted on the equations of motion. The number of these constraints can be changed by types of walking pattern with three modes. In order for the dynamic walking to be stabilizable, optimized trunk positions are iteratively determined by satisfying the system ZMP(Zero Moment Point) and ground conditions.

• Journal of the Korean Institute of Rural Architecture
• /
• v.11 no.1
• /
• pp.75-82
• /
• 2009

The goal of this study is to find a design pattern of platform of chapel according to acceptance of community's social activities and classify a forms of platform design between urban and rural community church. It was surveyed by 18 community churches including of 8 rural churches. And it was comprised in main contents that this study surveyed about social functions of church and composition of room, a transformation of worship and platform, and furniture of platform. As a results of this study, I could suggest a conclusions as follows; firstly, community churches are trying hard to make their social functions wide and deep. Secondly it was necessary for them to prepare a spaces and rooms for service of community people like a social welfare and christian cultural activities. Thirdly, the form of platform and style of worship were serviced by transformation for the acceptance of community requirements. Finally, the service style of chapel and platform have been transformed in a view point of accommodation of community since early 2000.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.199-211
• /
• 2006

Practical automated flat pattern generation with inbuilt production features for doubly curved sheet metal components (SMCs) is addressed here utilizing a new and unique Point Transformation Algorithm (PTA). This is the third in the series of papers on practical Flat Pattern Development (FPD) [8] and Production Loft Generation Systems (PLGS) [9] complementing the pioneering work [6,7]. In the first two publications, automated loft generation programs have addressed sheet metal components having a Principal Flat Surface (PFS) only. The flat pattern development of 3-D components that do not have the flat surface(termed as Non-PFS components) having complex features of double curvature in addition to cutouts and nibbled holes typical of aircraft components were so far not addressed due to lack of relevant published algorithms. This paper traces the evolution of developments and provides the record of fully illustrated, automated loft generation scheme for aircraft SMCs including the Non-PFS components which underwent validation through production tests by sponsors. Details of some of the unique features of the system like simplified surface model generation, termed as topological model and powerful algorithms deployed with potential for CAD/CAM applications are included.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1410-1420
• /
• 2005

The purpose of this study was to analyze characteristics of effective expression on T-shirts pattern by peirce's semiotic theory. The methods of this study was to analyze 721 T-shirts patterns in designer's collection from 2000 to 2004. The results of this study were as follows: First of all, iconic expression showed high frequency after 2000. Characteristics of effective expression were as follows: In geometric expression, repetition was presented as a symbolic sign by regular proportion and rule of dot, line, plane, irregularity, mixture of irregular dot, line, plane. Mixed expression was presented as a iconic and symbolic sign by collage, mixture of dot, line, plane, icon and letter. In iconic expression, simplification of iconic sigrl was presented as a iconic sign by simplification of form, color, texture, realistic expression using digital as a iconic sign, and symbolic face, body as a symbolic sign. Pop art's expression was presented as a iconic sign by a cartoon and commercial character and illusion was presented as a iconic sign. In letter's expression, brand logo was presented as a symbolic sign by transformation of letter's design, a symbolic sign of numeral by transformation of size, thickness, form, color. Symbolic message phrase was presented by slogan, fashion trend, brand image, descriptive indication message as a index sign by using icon or singleness. In conclusion, characteristics of effective expression on T-shirts pattern will present not only the theoretical foundation to raise the value added, but also the information about beauty sense of times, political and social value.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2020

Accurate knowledge of land use/land cover (LULC) features and their relative changes over upon the time are essential for sustainable urban management. Urban sprawl growth has been always also a worldwide concern that needs to carefully monitor particularly in a developing country where unplanned building constriction has been expanding at a high rate. Recently, remotely sensed imageries with a very high spatial/spectral resolution and state of the art machine learning approaches sent the urban classification and growth monitoring to a higher level. In this research, we classified the Quickbird satellite imagery by object-based image analysis of Dempster-Shafer (OBIA-DS) for the years of 2002 and 2015 at Karbala-Iraq. The real LULC changes including, residential sprawl expansion, amongst these years, were identified via change detection procedure. In accordance with extracted features of LULC and detected trend of urban pattern, the future LULC dynamic was simulated by using land transformation model (LTM) in geospatial information system (GIS) platform. Both classification and prediction stages were successfully validated using ground control points (GCPs) through accuracy assessment metric of Kappa coefficient that indicated 0.87 and 0.91 for 2002 and 2015 classification as well as 0.79 for prediction part. Detail results revealed a substantial growth in building over fifteen years that mostly replaced by agriculture and orchard field. The prediction scenario of LULC sprawl development for 2030 revealed a substantial decline in green and agriculture land as well as an extensive increment in build-up area especially at the countryside of the city without following the residential pattern standard. The proposed method helps urban decision-makers to identify the detail temporal-spatial growth pattern of highly populated cities like Karbala. Additionally, the results of this study can be considered as a probable future map in order to design enough future social services and amenities for the local inhabitants.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.33-56
• /
• 1998

This study examines the characteristics of service economies and their impacts on the spatial transformation of Korea during the last IS years. This study reviews the different perspectives for the tertiarization Process. It focuses on the spatial variation in the growth and location of Producer service industries. Based on the analyses of industrial and occupational compositions, services. particularly producer services, have played a major role in creating new job opportunities since the late 1980s. The ratio of services to merchandise trade is approximately 1:4, but service trades have increased since the early 1990s. Producer service activities have grown very rapidly, and the information processing service has been over-concentrated in Seoul. Further headquarters of bank and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have linkage Pattern on a nationwide scale. The pattern of employment growth in producer services shows a clear core-Periphery disparity. In the light of the observed pattern of regional differentiation in producer service employment, some wider implications of the distribution of producer service activities for regional economic Performance are considered.

• Journal of Yeungnam Medical Science
• /
• v.34 no.2
• /
• pp.298-302
• /
• 2017

Glandular papilloma of the lung is one of three histologic types of solitary endobronchial papillomas. It is known as an uncommon benign neoplasm. No malignant glandular papillomas have been reported. Herein, the first case of granular papilloma with malignant transformation is reported. A 74-year-old man with huge right lung mass extended upper and lower lobe was admitted to the hospital complaining of progressive cough and dyspnea. An open lung biopsy was performed. Microscopically, the tumor showed papillary growth pattern with thick fibrovascular cores. The stroma of the fibrovascular cores shown the infiltration of lymphoplasmacytic cells and proliferation of capillaries. The epithelial cells surrounding the papillary fronds were cilliated columnar cells with focal cellar atypia, and frequent mitoses. Suspicious pleural invasion foci were identified. The Ki-67 labeling index was about 24.3% and p53 labeling index was about 31.7%. Glandular papilloma is known as a benign neoplasm, which is lack of atypia and mitosis. In present case, there were several indications of malignant transformation, such as cellular atypia, frequent mitosis, architectural distortion, and pleural invasion. Pathologists must be aware that glandular papilloma can have a changes of malignant transformation. Further studies about disease behavior and molecular characteristics are needed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.275-282
• /
• 2017

In this paper, using a pattern transformation triggered by deformation, we propose a porous structure that exhibits the characteristic of negative Poisson's ratio in both tension and compression. Due to the lack of torque for rotational motion of ligaments, the existing porous structure of circular holes shows positive Poisson's ratio under tension loading. Also, the porous structure of elliptic holes has a drawback of low durability due to stress concentration. Thus, we design curved ligaments to increase the rotational torque under tension and to alleviate the stress concentration such that strain energy is uniformly distributed in the whole structure. The developed structure possesses better stiffness and durability than the existing structures. It also exhibits the negative Poisson ratio in both compression and tension of 10% nominal strain. Through nonlinear finite element analysis, the performance of developed structure is compared with the existing structure of elliptic holes. The developed structure turns out to be significantly improved in terms of stiffness and durability.

• Journal of Plant Biotechnology
• /
• v.2 no.1
• /
• pp.43-49
• /
• 2000

An efficient and reliable Agrobacterium transformation procedure based on TDZ (thidiazuron)-induced organogenesis was established and applied to six Brazilian eggp1ant varieties. Optimum transgenic plants recovery was achieved upon the study of the following parameters affecting transformation efficiency, using F-100 variety as a model: i) explant source; ii) pre-culture period; iii) physical state of the pre-culture medium and iv) coculture conditions. The highest frequency of kanamycin-resistant calli derived from leaf explants (5%) was obtained without a pre-culture period and co-cultivation for 24 h in liquid medium followed by five days on solid RM (regeneration medium). For cotyledon explants, best results were achieved upon a pre-culture of 24 h in liquid RM and a co-cultivation period of 24 h in liquid RM followed by three days in solid RM, resulting in a transformation Sequency of 22.7%. Kanamycin-resistant organogenic calli were also obtained from cultivars Emb, Preta Comprida, Round nose Shaded, Campineira and Florida Market. The expression pattern of an epidermis-specific promoter was studied using transformants expressing a chimaeric construct comprised by the promoter Atgrp-5 transcriptionally fused to the coding region of the gus gene. The expression pattern was similar to that previously observed in tobacco and Arabidopsis thaliana, with preferential expression at the epidermis and the stem phloem. These results support the idea that the Atgrp-5 promoter can be used to drive defense genes in these tissues, which are sites of pathogen interaction and spread, in programs for the genetic improvement of eggplant.