• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.308-317
• /
• 2019

This study provided data for classifying and characterizing the lower half of the body shape for obese adult men in their 30s and 40s. Data of 492 adult males who were obese with a WHO criteria of >25 BMI were used for analysis. The results of the study are as follows. Six factors extracted from the factorial analysis as independent factors for cluster analysis were classified into three types. Type 1 (65.4%) had the lowest height of the lower half of the body with short circumference and length. Type 2 (20.3%) had the lowest height of the lower half of the body with the largest thickness, width and circumference from the back to the hip, but short in length. Type 3 (14.2%) had the lowest height of the lower half of the body with medium height and waist-height; however, the curve from the waist to the hip was the largest with the largest waist circumference, hip circumference, and width and thickness of the lower half of the body. This study will help to design a slack pattern that utilizes body shape characteristics of men in their 30s and 40s. In a follow-up study, we analyze the slack pattern and educational pattern by the company and study the necessity for a slack pattern for obese males.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.223-235
• /
• 1998

A dedicated CAM(Computer-Aided Manufacturing) system has been developed, which generated tool-path to machine Styrofoam stamping die-patterns in Chrysler Corporation. A previous process to build die-patterns was to "stick build" the pattern, in which stock is cut & glued together, and then the NC machining of part-surface shape completes building a Styrofoam die-pattern. The current process utilizes the developed CAM system, and almost removes the manual work, consequently reduces the overall lead time. The paper presents the overall system structures, tool-path generation, and some features of Styrofoam pattern machining.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.524-540
• /
• 2015

This study develops textile pattern design ideas created through the visualization of music. Methods of auditory and synesthesia were employed to analyze various attributes of popular music genres and appoint language image, shape image, and color image to obtain their interrelationships. This study provides data that can be used to express emotional images on textile print pattern designs. This research used different genres of popular music as stimuli. The language image was extracted and introduced to the overall color scheme; in addition, the color image was verified. The analysis of the color image was executed by applying it with the color set image scale of I.R.I colors. Then, the color image of the target genre of popular music was examined and analyzed through a color tone system. The preference in shape image was realized through visual images based on basic principles of points, lines, and sides composition; subsequently, an analysis of the emotional image of popular music followed. An examination of the emotional images of different popular music genres have led to the discovery that language image, color image, and shape image all share a common emotional image. There was also a realization that similarity and interrelationship exists in language, color, and shape images experienced by listening to popular music.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.1-14
• /
• 2011

In order to determine temporal changes of the urban landscape, interdependence and interaction among geo-spatial objects can be analyzed using GIS analytic methods. In this study, to investigate changes in the landscape structure of the Namyangju area, the size and shape of landscape patches, and the distance between the patches were analyzed with the Spatial Autocorrelation Method. In addition, both global and local spatial autocorrelation analyses were conducted. The results of global Moran's I revealed that both patch size and shape index transformed to a more dispersed pattern over time. Next, the local Moran's I of patch size in all time series determined that almost all patches were of a high-low pattern. Meanwhile, the local Moran's I of the shape index was found to have changed from a high-high pattern to a high-low pattern in time series. Finally, as time passes, the number of hot spot patches about size and shape index had been decreased according to the results of hot spot analysis. These changes appeared around the development projects in the study area. From the results of this study, degradation of landscape patches in Namyangju were ascertained and their specific areas were delineated. Such results can be used as useful data in selecting areas for conservation and for preparing plans and strategies in environmental restoration.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.354-363
• /
• 2010

The purpose of this study was to provide some preliminary results on application of 3D scan data of head shapes to the hat design and pattern-making. This paper defined necessary measurement items and concepts in 3-dimensional images of head shapes. And also it presented the methodology to pattern-making of 6-piece crown hat based on 3D data. It used the data of Size Korea to pick up and choose a head shape model with the average head size of Korean women in their twenties. Main results were: 1. The 3D scan data of head shape was better than the 1 dimensional measurement data. Because I could establish a hat pattern-making theory by the 3D scan data of head. 2. The 3D scan data provided the basis for conceptualization of basic measurement points and items for a better fit of hats as well as the definition of the basic hat circumference. 3. This presented a methodology for analyzing out head shape by 3D scan data, and allowed the derivation of the basic hat circumference from the maximum head circumference. 4. As the 6-piece Crown cloche hat made by this method fitted the head shape model perfectly, this methodology could suggest potential applicability to various hat design.

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.170-180
• /
• 2019

Objective: The purpose of this study was to investigate the relationship between the facial skeletal patterns and the shape of the mandibular symphysis in adults with malocclusion by using a structural equation model (SEM). Methods: Ninety adults who had malocclusion and had records of facial skeletal measurements performed using cone-beam computed tomography were selected for this study. The skeletal measurements were classified into three groups (vertical, anteroposterior, and transverse). Cross-sectional images of the mandibular symphysis were analyzed using generalized Procrustes and principal component (PC) analyses. A SEM was constructed after the factors were extracted via factor analysis. Results: Two factors were extracted from the transverse, vertical, and anteroposterior skeletal measurements. Latent variables were extracted for each factor. PC1, PC2, and PC3 were selected to analyze the variations of the mandibular symphyseal shape. The SEM was constructed using the skeletal variables, PCs, and latent variables. The SEM showed that the vertical latent variable exerted the most influence on the mandibular symphyseal shape. Conclusions: The relationship between the skeletal pattern and the mandibular symphysis was analyzed using a SEM, which showed that the vertical facial skeletal pattern had the highest effect on the shape of the mandibular symphysis.

• Korean Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.110-113
• /
• 1999

Clothing shape is principally described in seven factors that are composed of clothing design, clothing material, clothing size, pattern design, sewing method and body motion etc. The aims of this study was to measurement out-line space-shape variation of clothing fitness with body by using the image processing. The subjects for direct anthropometric measurements were 248 female college students aged from 19 to 22. The data were statistically analyzed by principal analysis and cluster analysis. The results selected one somatotype. for the out-line space-shape variation of clothing fitness with body, there dimensional clothing shapes measured. and cross-sectional clothing shape obtained by the measurement was considered to be space wave form. The out-line space-shape variation of clothing fitness with body was observed between the node number and amplitudes of clothing wave form, and node number was determined at the maxim of space-shape amplitude, and the space-shape amplitudes have related with aspect ratio of cross-sectional shape. (Korean J of Human Ecology 2(1) :110-113, 1999)

• Journal of Information Technology Applications and Management
• /
• v.27 no.3
• /
• pp.69-75
• /
• 2020

In this paper, we applied the shape parameters of the exponentialized exponential life distribution widely used in the field of software reliability, and compared the reliability properties of the software using the non-homogeneous Poisson process in finite failure. In addition, the average value function is also a non-decreasing form. In the case of the larger the shape parameter, the smaller the estimated error in predicting the predicted value in comparison with the true value, so it can be regarded as an efficient model in terms of relative accuracy. Also, in the larger the shape parameter, the larger the estimated value of the coefficient of determination, which can be regarded as an efficient model in terms of suitability. So. the larger the shape parameter model can be regarded as an efficient model in terms of goodness-of-fit. In the form of the reliability function, it gradually appears as a non-increasing pattern and the higher the shape parameter, the lower it is as the mission time elapses. Through this study, software operators can use the pattern of mean square error, mean value, and hazard function as a basic guideline for exploring software failures.