• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.409-422
• /
• 1995

The purpose of this study was to investigate the effects of radiation on the formation of rat molar enamel at the developmental stage. The experimental animals were divided into five groups and were irradiated single dose of 396cGy ; 1 st group on 14th day of gestation, 2nd group on 19th day of gestation, 3rd group on 3 days after birth, 4th group on 8 days after birth, 5th group on 28 days after birth. The control and 1, 2, 3, and 4th experimental groups were sacrificed on 2, 4, and 6 weeks and the 5th groups were sacrificed on 1 day and 2 weeks after irradiation. Distal 1/2 and occlusal 1/3 enamel surface of lingual side of lingual cusp, and fractured surface of lingual side of lingual cusp in a longitudinal direction of the mandibular first molar were examined using scanning electron microscope. The following results were obtained. 1. The roughness of enamel surface and enamel hypoplasia were increased in a sequence of 4th, 1st, 2nd, and 3rd experimental group, and the enamel cracks were increased in the 1st and 2nd experimental group. 2. The pattern of enamel hypoplasia had a network form on the 1st and 2nd experimental group, and appeared a linear shape on the 3rd experimental group, and then the crator-like enamel defects were observed in all experimental groups (especially 1st and 2nd experimental group) except 5th. 3. Dentinoenamel junction showed the clear-cut and straight appearance except 5th experimental group. 4. There was no significant difference between 5th experimental and control group.

• Journal of Digital Contents Society
• /
• v.14 no.2
• /
• pp.275-282
• /
• 2013

In medical image processing field, object recognition is usually carried out by computerized processing of various input information such as brightness, shape, and pattern. If the information mentioned does not make sense, however, many limitations could occur with object recognition during computer processing. Therefore, this paper suggests effective object recognition method based on the magnetic resonance (MR) theory to resolve the basic limitations in computer processing. We propose the efficient method of robust gray-white matter segmentation by texture analysis through the Susceptibility Weighted Imaging (SWI) for contrast enhancement. As a result, an average area difference of 5.2%, which was higher than the accuracy of conventional region segmentation algorithm, was obtained.

• BMB Reports
• /
• v.28 no.6
• /
• pp.499-503
• /
• 1995

In our previous studies (Chae et al., 1990; Chae et a1., 1993), we found that a phytochrome signal was clearly connected with the change in cytosolic free $Ca^{2+}$ concentration ($[Ca^{2+}]_i$) in oat cells. It was determined that the $[Ca^{2+}]_i$ change occured both by mobilization out of the intracellular $Ca^{2+}$ store and by influx from the medium. The specific aim of this work is to elucidate the processes connecting $Ca^{2+}$ mobilization and influx. The cells treated with thapsigargin (increasing $[Ca^{2+}]_i$ by inhibition of the $Ca^{2+}$-ATPase in the calcium pool) in the presence of external $Ca^{2+}$ showed the same increasing pattern (sustained increasing shape) of $[Ca^{2+}]_i$ as that measured in animal cells. Red light irradiation after thapsigargin treatment did not increase $[Ca^{2+}]_i$ These results suggest that thapsigargin also acts specifically in the processes of mobilization and influx of $Ca^{2+}$ in oat cells. When the cells were treated with TEA ($K^+$ channel blocker), changes in $[Ca^{2+}]_i$ were drastically reduced in comparison with that measured in the absence of TEA. The results suggest that the change in $[Ca^{2+}]_i$ due to red light irradiation is somehow related with $K^+$ channel opening to change membrane potential. The membrane potential change due to $K^+$ influx might be the critical factor in opening a voltage-dependent calcium channel for $Ca^{2+}$ influx.

• Journal of the Korean Society of Costume
• /
• v.63 no.6
• /
• pp.113-126
• /
• 2013

The purpose of this study is to analyze the current use of mannequins that are designed to display Hanbok and put forward suggestions for improvement. In order to carry out the study, an analysis on the mannequins that are currently in the market was conducted along with a survey with professionals who are in charge of the display. The significance of the study is that it has gathered the opinions of professionals who are currently participating in the displays of Hanbok to lay the foundation for improvements. As Hanbok is a flat-pattern costume unlike the Western ones, the most prominent way to display is to lay them on the floor or hang them on the wall. Nevertheless, the mannequin displays are needed to show the beauty of Hanbok as the silhouette can only be completed when it is put on a body. A new type of mannequins that can portray the distinctive features of Korean beauty more effectively need to be developed. Although the museum and enterprise slightly differ in their preferences and requirements for the mannequins, both agree on the following criteria; the shape should be adjusted: the protruding breasts of the mannequin are not suitable for Hanbok, the body should be disassembled: all parts of the body should be separable and it should be flexible at the joints so that it can produce various poses, the face should represent the "koreaness" and the material should be soft. Based on these findings, we put forth the suggestion that a more suitable mannequin should be developed to portray the beauty of Hanbok.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.487-493
• /
• 2010

The objectives of this study were to investigate the progress of obesity in women from childhood to adulthood and to analyze the characteristics of obese figures through comparing their body proportions to normal-weight people, to provide a basic reference for development of new size categories and improved pattern grading. Body measurement was made on 6,704 women age between 7-39 in Sizekorea 2004 database. The age range was divided into three groups: children(7-12), teenagers(13-18) and adults(19-39). The result of research into the characteristics of body proportions of obese figures and the classification of different figure groups of obese people are as follows: The ratio between width and circumference for each part of the body was investigated according to body weight which was grouped into three different weights of low, normal and obese body weights. And the result demonstrated that in all the ranges of age, the obese groups had the lowest ratio between width and circumference, having a thick body shape. And according to the result of comparing the ratio of the circumference of each body part divided by the waist circumference, the obese group also showed a low ratio, indicating that they have bigger waist circumference than any other body parts. By analyzing the ratio of circumference of body parts divided by waist circumference, three factors were identified as contributing to obesity. Using the factor loadings of the upper, distal and lower body obesity, a cluster analysis was carried out and three different categories of obesity were defined; abdominal obesity, distal obesity and proximal obesity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.60-69
• /
• 2013

An optimum configuration of the hybrid/dual swirl jet combustor for a micro-gas turbine was investigated experimentally. Location of pilot nozzle, angle and direction of swirler vane were varied systematically as main parameters under the conditions of constant thermal load. The results showed that the variation in locations of inner fuel nozzle and pilot burner resulted in significant change in flame shape and swirl intensity due to the changes in recirculating flow pattern and minimum flow area near burner exit, in particular, with the significant reduction of CO emission near lean-flammability limit. In addition, it was observed that the co-swirl configuration produced less CO and NOx emissions compared to the counter-swirl configuration.

• Structural Engineering and Mechanics
• /
• v.53 no.2
• /
• pp.227-248
• /
• 2015

A CFPBS (Cone-type Friction Pendulum Bearing System) was developed to control the acceleration delivered to a structure to prevent the damage and degradation of critical communication equipment during earthquakes. This study evaluated the isolation performance of the CFPBS by numerical analysis. The CFPBS was manufactured in the shape of a cone differenced with the existing FPS (Friction Pendulum System), and a pattern was engraved on the friction surface. The natural frequencies of the CFPBS were evaluated from a free-vibration test with a seismic isolator system consisting of 4 CFPBS. To confirm the earthquake-resistant performance, a numerical analysis program was prepared using the equation of the CFPBS induced from the equations of motion. The equation reported by Tsai for the rolling-type seismic isolation bearings was proposed to design the equation of the CFPBS. Artificial seismic waves that satisfy the maximum earthquake scale of the Korean Building Code-Structural (KBC-2005) were created and verified to review the earthquake-resistant performance of the CFPBS by numerical analysis. The superstructural mass of the CFPBS and the skew angle of friction surface were considered for numerical analysis with El Centro NS, Kobe NS and artificial seismic waves. The CFPBS isolation performance evaluation was based on the numerical analysis results, and comparative analysis was performed between the results from numerical analysis and simplified theoretical equation under the same conditions. The validity of numerical analysis was verified from the shaking table test.

• Korean Journal of Plant Taxonomy
• /
• v.36 no.4
• /
• pp.309-333
• /
• 2006

Examined were the vegetative and reproductive characters such as external morphology, anatomy (leaf petiole, blade and stem), pollen and nutlet for the taxonomic revision of Elsholtzia in Korea. The inflorescence of all studied taxa of Elsholtzia in Korea is secund and 0.5-10 cm long. Leaves are ovate or nearly and $0.2-10{\times}0.2-6.0cm$. The shapes of inflorescence and leaves are very useful taxonomic characters. The stomata types are anomocytic and diacytic. The morphology of nutlet is ovoid and pitted in surface pattern of exocarp. All studied taxa are myxocarpy. The pollen grains are of medium size and subprolate in shape, and have typical bi-reticulate exine surface. Four species are recognized for Korean Elsholtzia by the identification key and descriptions in this study.

• Imaging Science in Dentistry
• /
• v.40 no.3
• /
• pp.115-121
• /
• 2010

Purpose : The purpose of this study was to accurately analyze the radiographic characteristics of dentigerous cyst (DC) with multiplanar images of cone beam computed tomography (CBCT). Materials and Methods : Thirty eight radiographically and histopathologically proven cases of DCs were analyzed with panoramic radiograph and CBCT, retrospectively. The radiographic CT pattern, symmetry of radiolucency around the unerupted tooth crown, ratio of long length to short length, degree of cortical bone alternation, effects on adjacent tooth, and cyst size were analyzed. Relative frequencies of these radiographic features were evaluated. In order to compare the CBCT features of DC with those of odontogenic keratocyst (OKC), 9 cases of OKCs were analyzed with the same method radiographically. Results : DCs consisted of thirty unilocular cases (79.0%), seven lobulated cases (18.4%) and one multilocular case (2.6%). Eight were asymmetric (21.0%) and thirty were symmetric (79.0%). Maxillary DC showed rounder shape than mandibular DC (L/S ratio; maxilla 1.32, mandible 1.67). Alternations of lingual cortical bone (14 cases, 48.2%) were more frequent than those of buccal side (7 cases, 24.1%). CBCT images of DC showed definite root resorption and bucco-lingual tooth displacement. These findings were hardly observed on panoramic radiographs of DCs. Comparison of CBCT features of DC with those of OKC showed several different features. Conclusions : CBCT images of DC showed various characteristic radiographic features. Therefore, CBCT can be helpful for the diagnosis of DC radiographically.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.141-148
• /
• 2019

Electronic substrates used in a mobile device is composed of various materials, and when the temperature is changed during manufacturing or operating, thermal deformation and stress concentration occur due to the difference in thermal expansion coefficient of each material. The shadow moiré technique is a non-contact optical method that measures shape or out-of-plane displacement over the entire area, but it is necessary to overcome the Talbot effect for high sensitivity applications. In this paper, LED light sources of various wavelengths was used to overcome the Talbot effect caused in the shadow moiré technique. By using the phase shift method, an experimental method to retain the measurement sensitivity within 10 ㎛/fringe was proposed and evaluated, and this method is applied to the thermal deformation measurement of the mobile electronic substrate. In the case of using white light, there were several areas that could not be measured due to the Talbot effect, but in the case of using blue LED light, it was shown that a precise moiré pattern with a sensitivity of 6.25 ㎛/fringe could be obtained in most areas.