• Ocean and Polar Research
• /
• v.44 no.2
• /
• pp.127-137
• /
• 2022

This study examined the growth pattern and environmental factors affecting the growth of the halophyte, Suaeda japonica, which is prevalent on tidal flats in the west coast of Korea in order to calculate annual carbon production. Quantitative sampling was conducted every month for three years from 2018 to 2020 on salt marshes located on the southern coast of Ganghwa Island. In terms of annual density affected by the germination rate at first period, especially when air temperature for winter time was constantly below 0℃ for long periods of time, germination decreased and precipitation in summer also exerted an influence. In terms of annual growth with regard to length, the part below the ground grew rapidly in the beginning after budding, while the part above ground grew at a relatively steady rate at all times. With regard to biomass, the part below the ground also increased from April in a manner similar to length growth, but decreased drastically from September with leaves falling off and water loss occurring. The part above ground showed a rapid increase from the beginning of the rainy season. Size-frequency distribution revealed broader patterns after the rainy season as individual growth varied, but from September, it stopped at all year. High growth rates were recorded in the initial phase of growth after budding and growth was rapid, but growth declined in summer when biomass increased. The annual mean production based on growth rate was calculated at 352 gDWt/m²/yr, and the highest production was 519 gDWt/m²/yr in 2018, but it has decreased since 2019. Annual carbon production was at calculated 143.41 gC/m²/yr for Suaeda japonica in the vicinity of the southern coast of Ganghwa Island.

• Biomedical Science Letters
• /
• v.11 no.3
• /
• pp.295-299
• /
• 2005

Staphylococcus aureus is an important animal and human pathogen implicated in a variety of disease including food-poisoning caused by staphyloccal enterotoxins (SEs). In order to investigate the difference in genomic types and to monitor the transmission of S. aureus isolates, a total of 25 S. aureus isolates from different sources were determined for their genotypic characteristics by pulsed-field gel electrophoresis (PFGE) in addition to their ability to enterotoxin production and antibiotic resistance patterns in this study. All the isolates were susceptible to amikacin, and the resistance pattern to ampicillin and penicillin were most common among 14 different patterns. Eleven of 24 isolates produced one of three SEs, SEA, SEC or SED. Sixteen representative PFGE patterns were obtained by Smal restriction fragments of S. aureus isolates. Analysis of dendrogram based on PFGE band patterns suggested that food-poisoning outbreaks be caused by the diverse sources of food, of which their raw materials were infected with S. aureus. Also, it could be concluded that PFGE was a powerful tool for epidemiological tracing of infection source for food-initiated outbreaks.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.267-280
• /
• 1992

This paper describes a numerical analysis of the light scattering patterns of roughness profiles. This analysis was based upon the light scattering theory developed by Beckmann. In the analysis, the roughness profile was regarded as a profile whose irregularities depend on the production process and the shape of cutting tool. Generally, waviness of an actual surface seriously distorts the scattered pattern of roughness profile. In order to avoid the effects of waviness of actual surfaces, several theoretically calculated scattering patterns, instead of actual scattering patterns, were used to analyze the scattering patterns of typical engineering roughness profiles. The characteristics of the light scattering patterns for five model surfaces were studied.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.39-46
• /
• 2019

This paper investigates the importance of various environmental factors that have a strong influence on strawberry yields grown in greenhouse using the pattern recognition methods. The environmental factors influencing the production of strawberries were six factors such as average inside temperature, average inside humidity, average $CO_2$ level, average soil temperature, cumulative solar radiation, and average illumination. The results of analyzing the observed data using Dynamic Time Warping (DTW) showed that the most significant factor influencing the strawberry production was average soil temperature, average inside humidity, and cumulative solar radiation. Second, the results of analyzing the observed data using Multidimensional Scaling (MDS) showed that the most influential factors on the strawberry yields, such as average $CO_2$ level, average inside humidity, and average illumination were differently given for each farms. However, these results are based on the distance in 3D space and can be deduced from the fact that there is not a large difference between these distances. Therefore, in order to increase the harvest of strawberries cultivated in the farms, it is necessary to manage the environmental factors such as thoroughly controlling the humidity and maintaining the concentration of $CO_2$ constantly by ventilation of the greenhouse.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2022

This study is a marketing tool for securing loyal customers and increasing sales by developing a customizing manual according to the change of segmented nail art consumption pattern due to the development of the nail industry and performing art to meet the needs of various customers and increase satisfaction. This was done to demonstrate the possibility of use. In order to develop a manual for the study, we conducted a survey that combined an online survey and in-person survey for ordinary citizens in their 20s and 50s living in Busan and Gyeongnam. Taste (50.0%) was the highest, and personal preference (62.9%) was also the highest for items related to nail art color selection, suggesting that the consumption pattern is changing to require a variety of personal art preferences rather than recommendations or recommendations from practitioners. Could know. As a result of performing nail art by applying the customizing manual developed based on customer selection, opinions were shown in the order of reliability (39.1%), attachment (39.1%), and rarity (26.1%). Utilization (73.9%) was also high in the question of 'If customizing manual was developed as an app', and overall satisfaction with the art selected by the customer was high, indicating that the customer had a high degree of attachment to the nail art design decided by the customer. As for the improvement points of the manual, it was possible to confirm the necessity of developing the app with the majority opinion that handwriting was inconvenient. Based on the nail art customizing manual of this study, the follow-up research proceeds with the app production and utilization process, and it is hoped that it will be used as a basic data for sales promotion by increasing customer satisfaction according to the rapidly changing consumption patterns of nail customers.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.159-174
• /
• 2017

It is very important to preserve the form of traditional costumes and to set the prototype for the design and production of various Korean costumes. This study therefore attempts to analyze the Danryeung pattern methods in textbooks in order to propose a prototype of Korean costumes and a system suitable for modern men, focusing on the Danryeung of the Joseon Dynasty. The research method examined the flow of the Danryeung system in the Joseon Dynasty through previous studies and literature, and the portrayal of the appearance of people of the time through portraits and paintings. The purpose of this study is to analyze the measurements and patterns of textbooks' Danryeung based on the analysis of characteristics of the 5th Joseon Dynasty. From that, the study will analyze the differences between textbooks and artifacts and will propose a Danryeung system for the body shape of modern males in their 30s. In this study, it is meaningful to propose the guideline for the design modification of Korean costumes by providing basic data for subsequent productions.

• The Research Journal of the Costume Culture
• /
• v.18 no.4
• /
• pp.741-754
• /
• 2010

The current study aims to link Korean tradition to modern culture; to re-produce patterns of lotus depicted in Minwha, The study also aims to discover the beauty of Korean tradition and to modernize it. The current study is based upon document searches(including research papers) and the Internet searches. Through these searches, it investigates the concept of Minhwa, the origin of lotus depiction and its symbolic meanings, the traits of such pattern. Based upon this investigation, the study attempts to modernize the patterns of lotus and apply the modernized patterns to designing shirts. The process which employs the lotus patterns illustrated in Minhwa to shirt design includes four sub-processes: selecting, allocating, coloring, and selecting production techniques. The sub- process of selecting patterns is two folded: the first stage covers carbon-copying the distinctive features of lotus, lotus leaf, lotus bud, lotus pip, and lotus stem; the second stage is making these features suitable to shirt sizes. For the process of coloring those shirts, Piccaso's work(Pablo Picasso, 1881~1973) has been selected and the colors in his work have been adopted to dye the rest of the shirts as well as the lotus features. The process of selecting production techniques includes ornament tail in order to modernize the patterns allocated in the shirts. Once these processes are completed, the shirts are made on a scale of real-life size. These processes of creating shirt design by modernizing traditional patterns will hopefully contribute to researchers expanding the domain of shirt design.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.137-148
• /
• 2008

This article investigates the production process of knitwear focused on patterns and armhole forms in order to provide basic data for its value-added production. This study was based on empirical data obtained by questionnaires given to 51 respondents employed at knitwear companies. The data had been statistically analyzed with frequency analysis, one-way ANOVA, and Duncan test. The results of this study are the following: First, many knitwear companies used knitting machines, which had gauges as high as 14G. Second, most knitwears companies did not use patterns in the production process. Third, most knitwear companies produced knitwears in which armhole lines were different between the front part and back part of the body, while identical between the front and back parts of the sleeves. Fourth, people with experience in the knitwear industry had the tendency to recognize that armhole lines should be different between the front part of both the body and sleeves and their back part as well, and workers in charge of knitting recognized better than programmers and designers did. Considering the opinions of experienced workers that armhole lines differ between the front and back parts of both the body and sleeves would improve the appearance of knitwear, this study also suggests knitwear patterns of 10G and 16G by using ESMODE's basic knitwear pattern.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.83-94
• /
• 2010

Conventionally, ornament has developed around linear thinking based on Euclidean geometry, and been explained as simple and lucid natural Euclidean geometrical phenomena. The modular arrangement with vertical, horizontal and diagonal grids has been an organizing principle of classical ornament, but in digital era ornament is found not to be explained only with the principle of traditional arrangement due to the seemingly irregular complex forms. In that sense, this study presents the concept of digital ornament and examined the backgrounds of ornament in digital age, that are complex system and non-Euclidean geometry. Accordingly, the present study takes an approach by dividing new formal types of ornament into algorithmic form, hybrid form and dynamic form to find out a principle of pattern organization. Lately, architects who actively use computer for their architectural designs take the algorithmic strategies in nature and create various and complex patterns by simple rules. The patterns are not the repetition of the same, but the production of singularities. In addition, hybrid form by morphing shows a topologically flexible evolutionary transformation, and is used to create in-between transitional shapes from the source to target. Finally, the patterns by the interaction between the system components which are corresponded to the embedded forces emerge from dynamic simulation of the natural environment. Rather than objects itself, focus is given to the process of generating forms, and the ornamental patterns as the revelation of such implicit order provide not just the formal beauty but also spatial pathways for lights and air, maximizing the effects of lights.

• Journal of Technology Innovation
• /
• v.2 no.1
• /
• pp.170-190
• /
• 1994

The importantce of a development of competitiveness in domestic construction industry is growing as some of domestic construction markets is scheduled to open to foreign competing firms with higher level of construction technology and management. A national level of competitiveness in domestic construction industry and firms are partially, but significantly, affected by a technology level and a characteristics of production pattern. The purpose of the study is mainly to analyze and identify a technology level, production pattern and a development stage of R&D activities of domestic construction industry and firms. Based on these findings the study draws on a concluding remarks and derives technology policy implications. Results of analysis in the study impliy that (1) competitiveness of domestic construction firms(industry) in terms of technology level is relatively weak as compare to that of advanced foreign competing firms, (2) degrees of substitution of capital for labor are seemed to be relatively high, (3) R&D (investment) activities of domestic construction firms are generally spread out in forms of import, adjustment and betterment, and (4) only a small number of big domestic construction firms are seemed to afford to R&D investment for research facilities and equipments, but not enough for higher level of R&D man-power. The study suggests that technology policy for construction industry should be based on a fundamental policy directions. For example the increase in size and heightened quality level of R&D man-power should be placed in a top priority in policy agenda. Sound and specific policy items should be developed for planning and design, and maintenace and inspection technology in order to lead domestic industry to compete with foreign firms with full strength.