• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2010

A purpose of this study was to find out how the casual and formal style clothes of stripe pattern giving variety by pattern direction, pattern width, and contrast coloration have an effect on image of wearers. 432 stimuli were made and 2,800 testee evaluated them using semantic differential scale. As a result, five image dimensions were drawn as a factor of attractiveness, activeness, gracefulness, visibility, and tenderness. In consequence of analysing the image difference by stripe pattern and clothing style, the stripe pattern and clothing style affect image presentation as a significant clue. And besides, as a result of positioning stimuli by image, pattern direction, coloration, and tone combination were important clues that decide image. Consequently, clothing style, stripe pattern, and contrast coloration were made clear as an efficient parameter in image presentation of clothing wearers.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.22-26
• /
• 2023

As Light-Emitting Diodes(LEDs) continue to advance in performance, their application in automotive lamps is increasing. Automotive LEDs utilize light guides not only for aesthetics but also to control light quantity and direction. Light guides employ patterns of a few hundred micrometers(㎛) to regulate the light, and the surface roughness(Ra) of these patterns can reach tens of nanometers(nm). Given that these light guides are produced through injection molding, mold processing technology with high surface quality micro-patterns is required. This study serves as a preliminary investigation into the development of high surface quality micro-pattern processing technology. It examines the surface roughness of the workpiece based on the cutting direction of the pattern and the cutting fluid type when cutting micro-patterns on STAVAX steel using cubic Boron Nitride(cBN) tools. The experiments involved machining a step-shaped micro-pattern with a height of 60 ㎛ and a pitch of 400 ㎛ in a 22×22 mm area under identical cutting conditions, with only the cutting direction and cutting fluid type being varied. The machining results of four cases were compared, encompassing two cases of cutting direction(parallel to the pattern, orthogonal to the pattern) and two cases of cutting fluid type (flood, mist). Consequently, the Ra value was found to be the highest(Ra 128.33 nm) when machining with the flood type in parallel to the pattern, while it was the lowest(Ra 95.22 nm) when machining with the mist type orthogonal to the pattern. These findings confirm that there is a difference of up to 25.8 % in the Ra value depending on the cutting direction and cutting fluid type.

• 한국멀티미디어학회논문지
• /
• 제18권1호
• /
• pp.71-80
• /
• 2015

Many researches have been studied to overcome the weak points in authentication schemes of mobile devices such as pattern-authentication that is vulnerable for smudge-attack. Since random-pattern-lock authenticates users by drawing figure of predefined-shape, it can be a method for robust security. However, the authentication performance of random-pattern-lock is influenced by input noise and individual characteristics sign pattern. We introduce an optimization method of user input direction to increase the authentication accuracy of random-pattern-lock. The method uses the likelihood of each direction given an data which is angles of line drawing by user. We adjusted recognition range for each direction and achieved the authentication rate of 95.60%.

• 한국의학물리학회지:의학물리
• /
• 제7권1호
• /
• pp.53-64
• /
• 1996

목적 : 별모양무늬를 이용하여 원격 방사선치료기의 회전축의 정확성을 평가할 때 방사선의 진행방향을 고려해야 하는 이론적 근거와 방법을 개발하고, 방사선의 진행방향이 기록되지 않는 경우 길이 방향의 비대칭 조사면을 이용하여 흉내내는 방법을 개발하는 것이다. 방법 : 갠트리 회전축의 기계적 정확성을 평가하기 위해 방사선의 진행방향을 고려하였다. 좁은 조사면에 의해 별모양무늬를 만들어 회전축이라고 어림되는 교점에서 l0cm 떨어진 위치의 측방선량분포를 필름농도계로 측정하여 선축의 좌표를 구하고 하나의 선축에 있는 한 쌍의 좌표를 이용하여 선축의 식을 구한다. 선축과 일치하는 방사선 진행방향의 단위벡터 equation omitted를 구하고 가정된 회전축의 좌표에서 각 선축으로 향하는 벡터 equation omitted와 equation omitted의 벡터곱 equation omitted$\times$equation omitted을 구하여 평균을 취하고 평균에 대한 벡터곱의 최소자승법을 적용하여 회전축의 좌표를 구한다. 그 때 벡터곱의 최대치의 절대값이 구하는 회전축의 정확도이다. 방사선의 진행방향을 고려할 수 없는 콜리메이터와 치료대에 대해서는 진행방향에 대응하는 것으로 긴 방향이 비대칭인 조사면을 이용하였다. 결과 : 동일한 별모양 무늬에 대해 방사선의 진행방향을 고려할 때 회전축의 기계적 정확성이 진행방향을 무시할 때와 다르게 평가되었다. 결론 : 별모양 무늬를 이용하여 원격치료기의 기계적 정확성을 평가할 때는 방사선의 진행방향을 고려하거나 흉내내어 정량적으로 평가해야 한다.

• 한국정보통신학회논문지
• /
• 제13권8호
• /
• pp.1527-1533
• /
• 2009

본 논문에서는 MVP 분포의 움직임 방향 치우침 특성을 이용한 방향성 탐색 패턴을 디자인하고, 탐색점의 이동 방향에 따라 탐색 패턴을 적응적으로 변화시키는 방향 적응적 십자형 다이아몬드 탐색 방법을 제안 한다. 제안한 방법은 이웃 매크로 블록으로부터 모션 벡터를 예측하고, 예측한 모션 벡터를 이용하여 초기 움직임 방향을 설정 한다. 탐색 과정에서 BMP의 이동 방향에 따라 제안한 탐색 패턴을 적응적으로 변화시킴으로써 탐색 효율을 향상시킨다. 실험 결과, 제안한 방법 은 움직임 추정에 소요되는 계산량을 기존의 십자형 다이아몬드 탐색에 비해 $0.43%{\sim}1.76%$ 감소시킴으로써 고속 움직임 추정이 가능함을 알 수 있었다.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.1-15
• /
• 2006

The purpose of this research is to find out the effect of clothing style and mixtures of stripe pattern direction, width, and coloration of an upper garment. The experimental materials made for this study are a set of stimuli and response scale(The 7-Point semantic). The subjects were 480 female undergraduate students in Seoul, Busan, Gyung-nam. The 80 stimuli which were variously incorporated with clothing styles and stipe patterns were assessed by the students. The following contents summarizes the results of the research. Impression factors of the stimuli consists of the 5 dimensions(Attractiveness, Show, Activity, Clearness, mildness). Amon these, the Attractiveness and Show dimensions proved to be more important. The clothing style and pattern direction indicated main effect in attractiveness and activity dimension. The pattern coloration showed a significant effect in dimensions except attractiveness and clearness. The pattern width had a significant effect only in the activity. Significant interaction effects of each clothing clause were found in the attractiveness, activity and clearness, but Show and mildness had no significant interaction effect. This research, as the 06 S/S, F/W trend, is a meaningful study in that it handled in the form of expression the stripe pattern used unrestrictedly in the casual wear or the formal wear by a fashion keyword.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.105-114
• /
• 2004

This study obtained the following consequences, as a result of the comparative analysis for the castability depending on an angle of the sprue and wax pattern in case of manufacturing dental prostheses, for the castability depending on direction, and for the castablility of sprue, which attached the reserve to each different 3.5mm roll wax(sprue wax) and to 2.5mm sprue wax. 1. As a result of the comparative analysis for the castability depending on an angle of the sprue and wax pattern, the best castability was shown when the angle of the sprue and wax pattern is 180$^{\circ}\Delta$(straight line), and the lowest castability was shown in 45$^{\circ}\Delta$, which was curved most, and there was no statistical significance. 2. As a result of the comparative analysis for the castability of an angle depending on direction, the best castability was shown in the farthest side from the direction of centrifugal casting, and the lowest castability was shown in the same side as the direction of centrifugal casting, and there was no statistical significance. 3. Given comparing the castability depending on the pattern of sprue, the better castability was shown in 135$^{\circ}\Delta$ and 180$^{\circ}\Delta$ when using 3.5mm roll wax(sprue wax), compared to attaching the reserve to 2.5mm sprue wax.

• 한국생활과학회지
• /
• 제15권3호
• /
• pp.481-490
• /
• 2006

Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).

• 복식문화연구
• /
• 제20권4호
• /
• pp.594-603
• /
• 2012

This study aimed to investigate a bias pattern making method with geometrical approach. The bias-cut dress has soft silhouette of drape in the garment. However, the bias cut dress has problem of satisfying the intended garment size spec. This problem occurs from various sources. The main reason is that the bias-cut fabric tends to stretch on longitudinal direction and to shrink horizontal direction when it was hung on the body. The goal of this study was to develop a bias-cut dress pattern making method satisfying the intended garment size spec. The researchers developed the geometrical method of measuring dimensional change by calculating the compensation ratio of the fabric in true bias direction. The compensation ratio was calculated by applying draping ratio of the fabric. Three types of fabrics were used in the experiment. The warp and weft crossing angle of fabric was ranged from $78^{\circ}$ to $82^{\circ}$. The fabrics stretched longitudinally 6.9~9.9% and shrank horizontally 7.2~11.0%. The compensation ratio of the bias-cut pattern for sample dress was calculated for each fabric type. Two types of experimental bias-cut dress patterns were developed for each fabric. One pattern was made with applying full compensation ratio and the other one made with applying partial ratio of the fabric. Experimental dresses were made with these patterns. The results of the evaluation showed that the bias-cut dress pattern applying the partial compensation ratio was more appropriate than the pattern applying the full compensation ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.738-743
• /
• 2013

Underwater radiated noise is the key in acoustic stealth performance of modern naval ships. The underwater radiated noise predicted by the hull vibration with radiation efficiency cannot give the information of radiation pattern which is essential to the analysis of detection possibility by enemy and to improve the operational performance of the naval ship. The radiation pattern of underwater radiated noise is able to be obtained with radiation efficiency and radiation direction coefficient. In this paper, a new method to extraction the radiation efficiency and radiation direction coefficient is suggested and proved with the simulation and experiment by using cylindrical shell of 70cm diameter in air.