• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.407-412
• /
• 2012

This study investigated the process of thermal-induced growth of micro-crack developed at the crystalline solar cell using EL image, determined the output characteristic according to the pattern of micro-crack, analyzed the I-V characteristic according to the pattern of crack growth, and predicted the output value using simulation. The purpose of this study was, therefore, to investigate the process of thermal-induced growth of micro-crack developed at the early stage of PV module completion using EL image, to analyze the resulting decrement of output and predict the output value using simulation. It was observed that the crack grew increasingly by the thermal condition, and accordingly the lowering of output was accelerated. The output values of crack patterns with various direction were predicted using simulation, resulting in close I-V curve with only around 4% of error rate. It is considered that it is possible to predict the electric characteristic of solar cell module using only pattern of micro-crack occurred at solar cell based on our results.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.43-48
• /
• 2014

The purpose of this study is to analyze the flame propagation speed, radiation range, diffusion pattern and combustion completion time of a fire by filling a divided space with single combustible substance. It was found that the flame propagation speed was the fastest (0.2 s) for kerosene and the lowest (82.1 s) for alcohol. In the case of paint thinner, it took 19.0 s for the flame to reach its peak at the fastest speed after ignition while in the case of alcohol, it took 138.6 s for the flame to reach its peak at the lowest speed. In the case of the combustion of 200 ml of flammable liquids, the combustion completion time was 79.9 s for paint thinner, which is the shortest, 135 s for gasoline, 170 s for kerosene, 231.4 s for diesel and 337.0 s for alcohol. In addition, when flammable liquids are combusted, the lower part of the flame is governed by laminar flow pattern and the upper part of the flame showed turbulence pattern. In the case of a test performed for bean oil, it could be seen that if the fire source was removed, the flame was automatically extinguished without further combustion and that white smoke was generated due to incomplete combustion.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.249-263
• /
• 1996

According to the design method for constructing the G gori(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic G gori, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar and the collar strip create a visual effect by equalizing the lengths of the tow sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since th-ere in no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial requlation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the pattern design is as follows: 1) The conic angle for the G gori's girth, length and neck width is fixed at 70 degrees. 2) The radius of the cone is B/2. 3) The calculation formula is B/4 + 1.5cm 4) The armhole formula is B/4, the same as in the basic method. 5) The width formula is B/10. 6) The ratio of the collar junction(width of collar + width of collar strip)to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius (B/2), that is an arc that exceeds the length of the G gori's midsection; the component ratio of this length to the collar junction is accordingly 13:5. 8) The curve frame length of the back midsection is an arc exceeding B/4(the armhole line). 9) The ratio of the sleeve opening calculation formula to the armhole length is 8:5, forming an arc with the midsection length.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.2
• /
• pp.176-183
• /
• 2021

Objectives : The purpose of this study was to find out how demographic factors, suicide attempt patterns, psychiatric history and management of suicide attempters affect the completion of emergency department (ED) based case management program. Methods : Among the patients who attempted suicide and visited the emergency department of Chung-Ang University Hospital from June 1, 2018 to May 31, 2021, 661 patients who agreed to case management were studied. After being discharged from the emergency department, subjects were registered for an eight-week follow-up service program. Hierarchical logistic regression analysis was conducted with demographic factors, suicide attempt patterns, psychiatric history and management as independent variables, and completion of case management program as dependent variables. Results : Suicide attempt pattern had the most significant influence on the completion of case management program, followed by demographic factors, psychiatric history and management. Those who completed the case management program were significantly more likely to have suicide plans in the future, more authentic in suicide attempts, and had higher proportion of past suicide attempts than those who did not complete the program. Conclusions : To ensure that the subjects complete the follow-up project program and get connected to community services, an individualized approach with consideration of suicide attempt patterns, demographic factors, and psychiatric history is needed.

• The Research Journal of the Costume Culture
• /
• v.21 no.3
• /
• pp.431-439
• /
• 2013

This study aims to give practical help to the pattern making of baggy pants produced in large quantity from industrial fields. The functionality of crotch part is a key element to decide wear sensation and comfort of pants as having direct influence on movements of legs in pattern designing of baggy pants. The industrial patterns of baggy pants in various styles that are released currently in Korea were collected and a comparative analysis was conducted on them for the thesis. First, samples of men baggy pants were collected from three different brands and compared the completion sizes. Secondly, it studied the most appropriate patterns as quantifying the appropriateness of movements through fitting tests. Finally, the study verified the differences of visual images by surveys of professional groups. The conclusions obtained from this research are as follows. In terms of aesthetic attribute among the three brands, A baggy pants, which had a small size tolerance, were the most appropriate. Meanwhile concerning the appropriateness of movement, B baggy pants were shown to be the most appropriate. This reveals explicitly the problem of aesthetic attribute and functionality, which are always in conflict during the pattern design. It is necessary to develop patterns and establish a measurement system that may satisfy both of these factors.

• KIEAE Journal
• /
• v.11 no.5
• /
• pp.91-96
• /
• 2011

This study is to analysis the characteristics of electric power consumption of apartments complex in Korea. This study shows the pattern of electric power consumption and correlation of each apartment complex's completion year monthly and timely. With this result, we are able to predict the demand pattern of electricity in a house and make the schedule by demand pattern. It is expected this data is used as reference of electric consumption of Daejeon area to operate the simulation tools to predict the building energy. The yearly data of 10 apartment complexes of 2010 are analyzed. The results of this study are followed. The averaged amount of electricity consumption in winter is higher as summer because of the high capacity of heating equipment. All of the house has electric base load from 0.26kWh to 0.5kWh. The average of the electricity consumption of month is shown as 310.2kWh. A week is seperated, as 4 part such as week, weekend, Saturday and Sunday. During week, the average of timely electricity consumption is shown as 0.426kWh. The Saturday consumption is 0.437kWh. The Sunday is 0.445kWh. The peak electricity consumption in summer and winter is measured. The peak consumption on summer season is 1.389kW on 22th August 64% higher than winter season 0.887kW on 3rd January.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.529-532
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLs) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spiral shapes of identical line width, gap and margin. SFCLs were fabricated from YBCO thin films grown on two-inch diameter $Al_2O_3$ substrates under the same conditions. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, bi-spiral shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.95-110
• /
• 1997

According to the design method for constructing the crotch angle of traditional Korean men's trousers there are differences in from after its completion. Since there is no standardization of visual & aesthetic pattern for the construction method which is stablished by the calculation formular of waist girth hip girth pantleg end and upper outer leg length it is difficult to be used for educational use or for teaching materials. Therefore the purpose of this project according to five models in proportion to the physical standard of Korea in ages from 24 to 29 years old is to establish a design criterion and the standardization of construction methods by introduction the pant construction method of the crotch angle by converting the sitting posture length to seaming crotch center point both knees width in the Korean way of sitting. The production method for the pattern design is as follow: (1) The waist girth formular is {{{{ { w} over {4 } }}}}+{{{{ {w} over {10 } }}}}(2) The hip girth formular is {{{{ {H } over { 4} }}}}+{{{{ {H } over {5 } }}}}(3) The pantleg end formular is {{{{ {H } over {4 } }}}}(4) A crotch angle is fixed at 70 degress.(5) The ratio of outer leg length to leg width is 5:8 (6) The component ratio of the upper outer leg length to the pant length in 5:8(7) The ratio of the division point of front / right inner leg length and left inner leg width to upper outer leg length is 5 : 8

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.859-862
• /
• 2015

Recent fashion business, is to promote and make a business strategy to realize a high added value to the first goal. Completion of the best men's clothing is only by making the pattern through a person's body size, making it as the best dressed. In this paper, we propose a system to automate production processes a significant impact on menswear production process, time and cost reduction in order to satisfy the needs of manufacturers and customers. Consequently, it is possible to provide optimal men's clothing by saving a time and expense of customers by, increases the customer's needs and men's clothing demand, it is possible to more easily perform to franchising custom men's clothing manufacturer.

• Journal of the Korean Home Economics Association
• /
• v.42 no.10 s.200
• /
• pp.63-77
• /
• 2004

The overuse of Internet has caused the problem of 'Internet addiction' in the life of college students. The purpose of this study was to develop a program of time management education for preventing Internet addiction among college students. The program consists of sessions. The first session is an introduction to the program which includes a pre-test about Internet addiction. The second session is designed to allow them to check their pattern of Internet use and time use by themselves. The third session is designed to set their tie goals and make long-range plans. The fourth session is designed to make short-range plans and look for alternative activities. The final session is the completion of the program. This study has some significance in developing a time management program for Internet addiction. and will be utilized in practical education.