• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.71-82
• /
• 2002

The software pattern is knowledge representation derived from the verified solutions or the experience of the experts. On account of the design varieties of software development, however, it is not the facilitated task to discover the best proper software pattern. This situation requires that software patterns be categorized in terms of their innate concepts. This paper proposes software pattern ontology(SPO) for the systematic categorization of software patterns by means of conceptual properties of patterns after the comparative analysis of association between software pattern and ontology. The SPO presented in this paper can establish the basis for the software pattern management system at the conceptual level. This paper also shows an idea for the application by unifying conceptual properties of software pattern and ontology. 

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.16-22
• /
• 2016

This paper addresses the load usage scheduling in the HEMS for residential power consumers. The HEMS would lead the residential users to change their power usage, so as to minimize the cost in response to external information such as a time-varying electricity price, the outside temperature. However, there may be a consumer's inconvenience in the change of the power usage. In order to improve this, it is required to understand the pattern of load usage according to the external information. Therefore, this paper suggests a methodology to model the load usage pattern, which classifies home appliances according to external information affecting the load usage and models the usage pattern for each appliance based on a copula function representing the correlation between variables. The modeled pattern would be reflected as a constraint condition for an optimal load usage scheduling problem in HEMS. To explain an application of the methodology, a case study is performed on an electrical water heater (EWH) and an optimal load usage scheduling for EHW is performed based on the branch-and-bound method. From the case study, it is shown that the load usage pattern can contribute to an efficient power consumption.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1802-1811
• /
• 2016

A novel battery SOH estimation algorithm based on outlier detection has been presented. The Battery state of health (SOH) is one of the most important parameters that describes the usability state of the power battery system. Firstly, a battery system model with lifetime fading characteristic was established, and the battery characteristic parameters were acquired from the lifetime fading process. Then, the outlier detection method based on angular distribution was used to identify the outliers among the battery behaviors. Lastly, the functional relationship between battery SOH and the outlier distribution was obtained by polynomial fitting method. The experimental results show that the algorithm can identify the outliers accurately, and the absolute error between the SOH estimation value and true value is less than 3%.

• Journal of Internet Computing and Services
• /
• v.16 no.6
• /
• pp.23-30
• /
• 2015

As BigData is issued, many applications that operate based on the results of data analysis have been developed, typically applications are products recommend service of e-commerce application service system, search service on the search engine service and friend list recommend system of social network service. In this paper, we suggests a decision frequent pattern tree that is combined the origin frequent pattern tree that is mining similar pattern to appear in the data set of the existing data mining techniques and decision tree based on the theory of computer science. The decision frequent pattern tree algorithm improves about problem of frequent pattern tree that have to make some a lot's pattern so it is to hard to analyze about data. We also proposes to model for a Mapredue framework that is a programming model to help to operate in distributed environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.89-97
• /
• 2017

Recent Internet of Things(IoT), and in addition to wearable PC, such as software development methodologies based on a variety of object-oriented design and design patterns of GoF(Gang of Four) with OOP(Object-Oriented Programming) intended for portable devices. However, incorrect application design specification is that the higher the importance of the optimization of the program on the device because it can cause problems such as decreased operating speed, increase the memory occupancy and battery usage. In this paper, we propose an optimized design pattern based on the method of application, such as Android (Android) OS Strategy Pattern, State Pattern, Observer pattern. Test results show that the proposed scheme selection patterns can be selected to optimize the design pattern in the device that specification.

• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.474-481
• /
• 2006

In this paper, a new type blow head was developed and pneumatic application system was evaluated. The blow head had one operating factor, inserting length of collecting plate, that was directly related to discharge rate and application pattern. To determine Proper blow head arrangement and application height, a blow head set was tested. Three-way ANOVA was conducted to investigate relationships between CV value, the discharge rate and inserting length of collecting plate. The discharge rate and inserting length of collecting plate were statistically significant at p=0.01, affecting uniformity of application pattern. The best CV value among the application tests was 23.3% when the application rate and application height was 23.5 g/sec and 80 cm respectively. The worst CV value was 63.3% in 111.4 g/sec. Therefore, it is necessary to increase number of blow head in a section of the boom in improve application uniformity.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2014

Objectives The purpose of this study is analyzing internal research trends of oriental obesity pattern identification in korean literature based on obesity pattern identification questionnaires, development and application of Pattern Identification System to help solve problems of future researches. Methods 6 Korean databases were searched for articles of oriental obesity pattern identification, irrespective of publication year and 13 studies were reviewed. An analytical method such as descriptive statistics and an actual number and percentage was used. Results We collected 13 studies. 4 studies were published in 2012 and 2008, the highest number of studies. 7 Clinical studies were the major research method. The Studies were classified according to the characteristics and design. 5 studies were about research of analysis and improvement of oriental obesity pattern identification questionnaire, the most number of studies. 4 studies were about research of observational studies in clinical on obesity pattern identification. 3 studies were about research of intervention studies in clinical on obesity pattern identification and 1 study was about clinical practice recommendation. Conclusions Establishment of obesity pattern identification system and its clinical application could lead to standardizing obesity pattern identification and clinical practice guideline. Applied on other diseases, obesity pattern identification system could also lead to improving treatment rate, contributing to the development of clinical practice guidelines and academic field of research.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.4
• /
• pp.613-619
• /
• 2008

A method to produce a desired current pattern in a multiple-source EIT system using voltage sources is presented. Application of current patterns to a body is known to be superior to the application of voltage patterns in terms of high spatial frequency noise suppression, resulting in high accuracy in conductivity and permittivity images. Since current sources are difficult and expensive to build, the use of voltage sources to apply the current pattern is desirable. An iterative algorithm presented in this paper generates the necessary voltage pattern that will produce the desired current pattern. The convergence of the algorithm is shown under the condition that the estimation error of the linear mapping matrix from voltage to current is small. Simulation results are presented to illustrate the convergence of the output current.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1422-1423
• /
• 2007

This study deals with various neural network algorithms for the on-site partial discharge pattern recognition. For the purpose, the pattern recognition has been carried out on partial discharge data for the typical artificial defect using 9 different neural network models. In order to enhance on-site applicability, artificial defects were installed in the insulation joint box of extra-high voltage xLPE cables and partial discharges were measured by use of the metal foil sensor and a HFCT as a sensor. As the result, it is found out that the accuracy of pattern recognition could be enhanced through the application of the Sigmoid function, the Momentum algorithm and the Genetic algorism on the artificial neural networks. Although Multilayer Perceptron (MLP) algorism showed the best result among 9 neural network algorisms, it is thought that more researches on others would be needed in consideration of on-site application.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.893-900
• /
• 2004

This paper is to define the method that develops the software In proper to application areas of Geographic Information Systems and design patterns according to functions and roles that implement the system for safety evaluation of the groundwater well based on an object oriented spatial model. In order to design the user interface of the groundwater well, this paper proposes the framework that should classify only requisite components adaptable to various application areas. By specifying De pattern appropriate to the application domain and designing the analysis pattern using the UML based on the object oriented methodology. this paper shah contribute to enhance the reuse of components that can develop and distribute a .large scale open system.