• ETRI Journal
• /
• v.35 no.4
• /
• pp.638-643
• /
• 2013

This paper presents a 5-bit digital step attenuator (DSA) using a commercial 0.18-${\mu}m$ silicon-on-insulator (SOI) process for the wideband phased array antenna. Both low insertion loss and low root mean square (RMS) phase error and amplitude error are achieved employing two attenuation topologies of the switched path attenuator and the switched T-type attenuator. The attenuation coverage of 31 dB with a least significant bit of 1 dB is achieved at DC to 20 GHz. The RMS phase error and amplitude error are less than $2.5^{\circ}$ and less than 0.5 dB, respectively. The measured insertion loss of the reference state is less than 5.5 dB at 10 GHz. The input return loss and output return loss are each less than 12 dB at DC to 20 GHz. The current consumption is nearly zero with a voltage supply of 1.8 V. The chip size is $0.93mm{\times}0.68mm$, including pads. To the best of the authors' knowledge, this is the first demonstration of a low phase error DC-to-20-GHz SOI DSA.

• Journal of Family Relations
• /
• v.22 no.3
• /
• pp.73-101
• /
• 2017

Objectives: This study is to understand the experiences of overcoming pain of loss of family survivors in Suicide Bereavement Support Group(SBSG). Method: Experiential data was collected by in-depth interview(FGI, individual) to 10 family survivors(over 19) who having an experience participating in SBSG over 5months and analyzed using qualitative methodology. Results: We drew the result that 'SPACE model' which structuralize by 5 stages of suicide survivors' experience of SBSG of time path. SPACE model configured as follow: Stage1, Space in vacuum, the time to feel a sense of overwhelming feeling like pain, fear, alienation after loss of suicide, Stage2, Probing, when to find informations and resources to help survivors themselves, Stage3, Acclimation, having experiences empathy and healing as in SBSG, Stage4, Composure, accepting SBSG meaning as a part of their lives, loss of my family by suicide, and the beginning of bereavement, Stage5, Endurance, overcoming suffering through SBSG and try to help other survivors. Conclusions: SBSG is the opportunity for family survivors to overcome the pains from loss of suicide, shock, anger, grief, etc., and to empower them to help other suicide survivors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.667-671
• /
• 2012

Low frequency noises (up to about 200 Hz) mainly occur due to particular modes, resulting in booming noises, and in general the solutions may be found based on mode controls where conventional methods such as FEM can be used. However, at higher frequencies between 0.3~ 1 kHz, as the number of modes rapidly increase, radiation characteristics from structures, performances of damping sheets and sound packages may be more crucial rather than particular modes, and consequently the conventional FEM may be less practical in dealing with this kinds of structure-borne problems. In this context, so-called 'mid-frequency simulation model' based on FE-SEA hybrid method is studied and validated. Energy Transmission loss (i.e. air borne noise) is also studied. A dash panel component is chosen for this study, which is an important path that transfers both structure-borne and air borne energies into the cavity. Design modifications including structural modifications, attachment of damping sheets and application of different sound packages are taken into account and the corresponding noise characteristics are experimentally identified. It is found that the dash member behaves as a noise path. The damping sheet or sound packages have similar influences on both sound radiation and transmission loss. The comparison between experiments and simulations shows that this model could be used to predict the tendency of noise improvement.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.11
• /
• pp.1071-1077
• /
• 2012

Low frequency noises(up to about 200 Hz) such as booming are mainly caused by particular modes, and in general the solutions may be found based on mode controls where conventional methods such as FEM can be used. However, at higher frequencies between 0.3~1 kHz, as the number of modes rapidly increases, radiation characteristics from structures, performances of damping sheets and sound packages may be more crucial rather than particular modes, and consequently the conventional FEM may be less practical in dealing with this kinds of structure-borne problems. In this context, so-called 'mid-frequency simulation model' based on FE-SEA hybrid method is studied and validated to reduce noise in this frequency region. Energy transmission loss(i.e. air borne noise) is also studied. A dash panel component is chosen for this study, which is an important path that transmits both structure-borne and air borne energies into the cavity. Design modifications including structural modifications, attachment of damping sheets and application of different sound packages are taken into account and the corresponding noise characteristics are experimentally identified. It is found that the dash member behaves as a noise path. The damping sheet and sound packages have similar influences on both sound radiation and transmission loss. The comparison between experiments and simulations shows that this model could be used to predict the tendency of noise improvement.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.27-32
• /
• 2007

This study was to suggest the predictive model of propagation, considering the effect by the multipath waves produced by the sending and receiving vehicles' left/right reflectors and the adjacent vehicles when the communication between the vehicles on the one-way two-lanes road in the urban city with a lot of traffic jams. Then, the radius of curved road was 600[m], the length of curved roads $52.4\sim471.2[m]$, and the bridge's pier of road was $5o\sim45o$. Also, it was simulated by changing the receiving vehicle located on the curved road's gap from minimum 3.3[m] to maximum 29.5[m], corresponding to the change of distance of the bridge's pier of road and curved road. As a result of this research above, in case of $5o\sim15o$ bridge's pier of road, it was within l[dB] regardless of the receiving vehicle's position on the curved road in case of propagation path loss. In case of $15o\sim45o$, it was approximately $1\sim8[dB]$ as the bridge's pier of road is changed. And, in case of propagation path, it found out that it was changed to $0.4\sim120[m]$ according to the change of bridge's pier of road. Then, the delay time of propagation was 400[nsec] as it produced 120[m] in the difference of propagation path.

• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.82-88
• /
• 2017

Emergency lights and exit signs are an indispensable part of safety precautions for effective evacuation in case of emergency in public buildings. These emergency sign indicates safe escape routes and emergency doors, using an internationally recognizable sign. However visibility of those signs drops drastically in case of emergency situations like fire smoke, etc. and loss of visibility causes serious problems for safety evacuation. This paper propose a novel emergency light and exit sign built-in with Bluetooth Low Energy (BLE) Beacon to assist the emergency self-guiding evacuation using devices for crisis and emergency management to avoid panic condition inside the buildings. In this approach, the emergency light and exit sign with the BLE beacons deployed in the indoor environments and the smart devices detect their indoor positions, direction to move, and next exit sign position from beacon messages and interact with map server in the Internet / Intranet over the available LTE and/or Wi-Fi network connectivity. The map server generate an optimal emergency exit path according to the nearest emergency exit based on a novel graph generation method for less route computation for each smart device. All emergency exit path data interfaces among three system components, the emergency exit signs, map server, and smart devices, have been defined for modular implementation of our emergency evacuation system. The proposed exit sign experimental system has been deployed and evaluated in real-time building environment thoroughly and gives a good evidence that the modular design of the proposed exit sign system and a novel approach to compute emergency exit path route based on the BLE beacon message, map server, and smart devices is competitive and viable.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.203-210
• /
• 2013

Majority of the wireless ad hoc routing protocols are proposed to find feasible routes without considering the network load, end-to-end link quality and bandwidth requirements of the application. Therefore, protocol may not provide sufficient quality of service (QoS) to a high speed traffic such as multimedia. In this paper, we propose a path-quality and bandwidth-estimation based routing protocol (PBBR) for the high quality multimedia stream that can meet the application's bandwidth requirements and find the best reliable route. The novelty of this protocol is to select a reliable path to respond the application's requirements based on available bandwidth at each intermediate node and end-to-end path loss ratio. Obtained results from the simulation demonstrates that our protocol can achieve sufficient performance in terms of throughput and end-to-end delay.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.147-154
• /
• 2008

A variety of activity happens around the sidewalk in the city. Particularly, a large variety of activity happens in shopping area, but it causes an obstruction of economical revitalization since the pedestrians require time and cost to find what they want. So, this study will develop the path searching method to minimize the economical loss of shoppers by providing the significant path and supporting the walking movement. Firstly, consider existing network expression techniques and approach three points which are physical and environmental factor, the recognition of the pedestrians' space when changing the direction, and the recognition of restriction of vision and accessibility. Try to design the network DB and simulate the algorithm. As a result, it is now possible to do the path searching that considers variety of recognition factors and show the method how to make the path-searching algorithm for pedestrian.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.820-821
• /
• 2008

본 논문은 FEA 기법을 이용하여 40kW급 HEV용 Traction 모터의 설계 및 고효율화를 위한 회전자 영구자석의 Eddy Current loss 저감 방안에 대한 연구를 수행하였다. 먼저 FEA 기법을 이용하여 40kW급 HEV용 Traction 모터 설계 및 특성해석을 수행하여 FEA 해석기법의 타당성을 확보하였다. 또한 Traction 모터의 손실 저감을 위해 magnet부분의 eddy current loss 저감방안에 대해 논하였으며, FEA 기법을 이용하여 회전자 magnet이 Solid, 1/2, 1/4, 1/14 segments로 나눈 타입에 따른 결과를 비교 분석하였다. 그 결과 magnet형태를 기존의 Solid 타입에서 14segments 타입으로 분할 시, magnet 내부의 current path가 줄어들어 eddy current loss가 가장 많이 저감됨을 알 수 있었으며, 이를 통해 HEV용 traction 모터의 고효율, 고성능화 설계방안을 도출 할 수 있었다.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.534-544
• /
• 2009

Finding link-disjoint or node-disjoint paths under multiple constraints is an effective way to improve network QoS ability, reliability, and so on. However, existing algorithms for such scheme cannot ensure a feasible solution for arbitrary networks. We propose design principles of an algorithm to fill this gap, which we arrive at by analyzing the properties of optimal solutions for the multi-constrained link-disjoint path pair problem. Based on this, we propose the link-disjoint optimal multi-constrained paths algorithm (LIDOMPA), to find the shortest link-disjoint path pair for any network. Three concepts, namely, the candidate optimal solution, the contractive constraint vector, and structure-aware non-dominance, are introduced to reduce its search space without loss of exactness. Extensive simulations show that LIDOMPA outperforms existing schemes and achieves acceptable complexity. Moreover, LIDOMPA is extended to the node-disjoint optimal multi-constrained paths algorithm (NODOMPA) for the multi-constrained node-disjoint path pair problem.