• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.35-41
• /
• 2020

Fast Fourier transform (FFT) processors have been widely used in various application such as communications, image, and biomedical signal processing. Especially, high-performance and low-power FFT processing is indispensable in OFDM-based communication systems. This paper presents a novel radix-26 FFT algorithm with low computational complexity and high hardware efficiency. Applying a 7-dimensional index mapping, the twiddle factor is decomposed and then radix-26 FFT algorithm is derived. The proposed algorithm has a simple twiddle factor sequence and a small number of complex multiplications, which can reduce the memory size for storing the twiddle factor. When the coefficient of twiddle factor is small, complex constant multipliers can be used efficiently instead of complex multipliers. Complex constant multipliers can be designed more efficiently using canonic signed digit (CSD) and common subexpression elimination (CSE) algorithm. An efficient complex constant multiplier design method for the twiddle factor multiplication used in the proposed radix-26 algorithm is proposed applying CSD and CSE algorithm. To evaluate performance of the previous and the proposed methods, 256-point single-path delay feedback (SDF) FFT is designed and synthesized into FPGA. The proposed algorithm uses about 10% less hardware than the previous algorithm.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.30-38
• /
• 2019

Tracking, which is one of the main causes of electrical fires, is perceived as a physical phenomenon of electrical discharge. Hence tracking should be explained based on electric field analysis, conduction path by electron generation, and gas discharge physics. However, few papers have considered these details. This paper proposes a tracking mechanism including their effects on tracking progress. In order to prove this mechanism, a tracking experiment, an electric field analysis for the carbonization evolution model, and an explanation of the tracking process by gas discharge physics were conducted. From the tracking experiment, the current waveforms were measured at each stage of the tracking progress from corona discharge to tracking breakdown. The electric field analysis was carried out in order to determine the electric field on the surface of a dry-band and the high electric field region for electron generation during the generation and progress of carbonization. In this paper, the proposed tracking mechanism consisted of six stages including electron avalanche by corona discharge, accumulation of positive ions, expansion of electron avalanche, secondary electron emission avalanche, streamer, and tracking by conductive path. The pulse current waveforms measured in the tracking experiment can be explained by the proposed tracking mechanism. The results of this study will be used as the technical data to detect tracking phenomenon, which is the cause of electric fire, and to improve the proof tracking index.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.41-50
• /
• 2021

In this study, the flow path width (Gap Size), which is the flow path of fluid, was selected differently among various factors that determine the Ccontrol Force of MR damper, and the change of Control Force was confirmed accordingly. For this purpose, two MR dampers with a Gap Size of 1.0mm and 1.5mm were fabricated, respectively, and dynamic load experiments were conducted according to changes in applied current and vibration conditions The experimental results showed that the minimum Control Force was 3.2 times higher than 1.5mm in the case of 1.0mm Gap Size, and the maximum Control Force was 2.3 times higher than 1.5mm in the case of 1.0mm Gap Size. In addition, the increased width of the Control Force according to applied current was 34N for Gap Size 1.0mm, and 12.7N for Gap Size 1.5mm. As the gap Size increased, the overall Control Force and the increase in the Control Force by the applied current decreased. Next, the dynamic range, which is a performance evaluation index of the semi-active Control device, was 2.3 on average under 1.0mm condition and 2.8 on average under 1.5mm condition, confirming the possibility of utilization as a semi-active Control device.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.413-426
• /
• 2023

This study presents the geochemical characteristics of cave water to evaluate its origin and flow path. From June 2022 to may 2023, river water was collected at two sites (WE1 and WE2) in the Donggang River around Baengnyongdonggul Cave, and cave water was collected at four sites (WE3 to WE6) inside Baengnyongdonggul Cave. Water samples were analyzed for major dissolved components. Both river and cave waters were classified as Ca-HCO₃ type. All cave water samples were supersaturated in carbonate minerals, suggesting that carbonate minerals would precipitate within the cave. Due to differences in the source of cave water and the degree of water-rock interaction, the geochemical characteristics of water from sites where the flow of cave water is observed (WE3 and WE6) and rimstone pools (WE4 and WE5) could be clearly distinguished. The cave water at WE6 flows in from the Donggang River, then passes through WE3 and flows back out into the Donggang River. The cave water at WE4 and WE5 is supplied from precipitation, but the flow path of cave water at WE4 and WE5 is different.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.78-85
• /
• 1992

This experiment was carried out to investigate the heritabilities, phenotypic correlation, genetic correlation and path-coefficients for desirable characters on the lodging related traits. Characters, that had high relation degree with field lodging degree, were rice-straw length, Wl /P, W/I, Wl /d, L, Wl / A, W/l, P, W $s^2$/ $l^4$ etc. Breaking strength appear negative correlation having an intention to field lodging. The second inertia moment of culm diameter trunk (branch), cross section area, rice-straw thickness and trunk cross section didn't appear negative coefficient with field lodging. It is considered that rice-straw length, leaf dry weight and lodging index, because of high heritability, become selection index of characters for breeding. In direct, indirect effect, and right rice-straw wall thickness appear largest( $P_{7y}$=0.6904), the next is the order of leaf dry weight( $P_{3y}$=0.2848), root dry weight ( $P_{1y}$=0.2658), culm diameter ( $P_{6y}$=-0.2280), and negative relation appear the order of rice-straw length ( $P_{5y}$=-0.9640) and stem dry weight( $P_{2y}$=-0.7072), therefore, the smaller culm length and stem dry weight, the stronger to lodging. to lodging.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.8
• /
• pp.195-202
• /
• 2018

With the development of location-based applications such as smart phones and GPS navigation, active research is being conducted to protect location and trajectory privacy. To receive location-related services, users must disclose their exact location to the server. However, disclosure of users' location exposes not only their locations but also their trajectory to the server, which can lead to concerns of privacy violation. Furthermore, users request from the server not only location information but also multimedia information (photographs, reviews, etc. of the location), and this increases the processing cost of the server and the information to be received by the user. To solve these problems, this study proposes the EGTC (Enhanced Grid-based Trajectory Cloaking) technique. As with the existing GTC (Grid-based Trajectory Cloaking) technique, EGTC method divides the user trajectory into grids at the user privacy level (UPL) and creates a cloaking region in which a random query sequence is determined. In the next step, the necessary information is received as index by considering the sub-grid cell corresponding to the path through which the user wishes to move as c(x,y). The proposed method ensures the trajectory privacy as with the existing GTC method while reducing the amount of information the user must listen to. The excellence of the proposed method has been proven through experimental results.

• The Journal of Korean Society for School & Community Health Education
• /
• v.4
• /
• pp.61-78
• /
• 2003

This research was conducted to identify the factors that cause school related stress among middle school students, and to develop countermeasures in order to prevent the rebellious acts of middle school students that are on the rise and to pursue after effective guidance measures. To achieve these research objectives, 856 questionnaires were distributed to the two middle schools, situated in Goyang-si, Gyeonggi Province, and these questionnaires were analyzed, using the SPSS statistical package program. The conclusions were as follows; 1. Perceived factors for School Related Stress Overall average of the perceived degree school related stress factors was a level that goes beyond the normalcy. Stress on the grade was the highest Among these, the average of question items that addressed decrease in grade was the highest of all items followed by class factors, teacher-related factors, friend-related factors, and environmental factors. Accordingly, this research demonstrated that the students feel pressured by the university entrace examination and a school life that is focused on grades. The teacher-related factors and class factors were higher than the average, and others were relatively low. 2. School Related Stress according by Individual All the factors for school related stress were statistically significant difference according to the gender, and teacher-related factors, class factors, and environmental factors were statistically significant difference according to their school years. Their grade made their grade factors statistically significant difference, and the number of friends produced a statistically significant difference result on the teacher-related factors. Wheather they had extra classes or not made a statistically significant difference result on the class factors and environmental factors, and especially the time of doing physical exercises produced statistically significant difference on the environmental factors. 3. Countermeasures for School Related Stress according by Individual As for the countermeasures for school related stress according to the individuality, the active reacting was statistically significant difference according to the gender index, and the student's degree to react passively was statistically significant difference according to their grade. The students in different school years showed statistically significant difference reactions in both passive ways and active ways. students tended to react differently in an unreality index. Lastly, Wheather they had extra classes and physical exercises made then to react passively or actively. When the results are compiled, students are most affected by the stress related to grades, which reflected the university entrance examination oriented school life. An alternative is that the development of educational program that factors in the students' talents and aptitude is needed urgently. Moreover, character and career path related guidance and education are just as important as the academics. Given that the stress factors exert some degree of influence on the countermeasures, it is necessary to block the factors in advance and for all the teachers and parents to make an effort to react actively.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.163-171
• /
• 2021

Conventional white light-emitting diodes (LEDs) for lighting applications consist of blue LEDs and yellow phosphors, the spectrum of which lacks deep red. To improve the color-rendering characteristics of white LEDs, a red quantum-dot film was applied to the diffuser plate of LED lighting. The mean free paths of the quantum dots and the concentration of the TiO₂ particles in the diffuser plate were adjusted to optimize the optical structure of the lighting. The color-rendering index (CRI) was greater than 90 for most conditions, which demonstrates that adoption of the red quantum-dot film is an effective way for improving the color-rendering properties of conventional white LEDs. The angular dispersion of color coordinates could be removed by utilizing the optical cavity formed between the diffuser plate and the reflector on the bottom of the lighting, where multiple passages of the light through the quantum-dot film reduced the differences in optical path length depending on the viewing angle.

• Economic and Environmental Geology
• /
• v.27 no.2
• /
• pp.161-170
• /
• 1994

Jindong Granites are plotted mainly in the region of granodiorite~diorite of the Streckeisen's diagram, while Yucheon-Eonyang Granites and Onjonri Granites in the region of monzo-granite and monzo-granite~granodiorite, respectively. Jindong Granites show a differenciation trend of calc-alkaline magma, and its magmatic evolution from intermediate to acidic rocks, which might form mineralizing solution, is consistant with the general path of the Cretaceous granitic rocks including Yucheon-Eonyang Granites and Onjongri Granites. The differenciation index (D.I.) is 35~80 for Jindong Granites, which is lower than 85~95 of Yucheon-Eonyang Granites and is partly overlapped by 67~84 of Onjongri Granites. There is clear difference in content of some major and trace elements between Jindong Granites of Cu province and the other granitic rocks of Pb-Zn and Mo provinces. Between these metallogenic provicnes, Cu content is high in Jindong Granites near Haman-Gunbuk mineralized zone, while Pb and Zn are relatively abundant in Yucheon-Eonyang Granites and Mo in Onjongri Granites. Therefore, Jindong Granites of the Cu province are distinguishable by chemical compositions and their related geochemical characteristics from the other Cretaceous granitic rocks of Pb-Zn and Mo provinces. However, the content of Cu and Cl in biotite is applicable to distinguish a productive phase from a barren phase of Jindong Granites, because Cu and Cl show a trend to be concentrated in biotite of Jindong Gratites in the Haman-Gunbuk mineralized zone.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.53.2-53.2
• /
• 2015

Fiber Bragg gratings (FBGs) are the most compact and reliable method of suppressing atmospheric emission lines in the infrared for ground-based telescopes. It has been proved that real FBGs based filters were able to eliminate 63 bright sky lines with minimal interline losses in 2011 (GNOSIS). Inscribing FBGs on multi-core fibers offers advantages. Compared to arrays of individual SMFs, the multi-core fiber Bragg grating (MCFBG) is greatly reduced in size, resistant to damage, simple to fabricate, and easy to taper into a photonics lantern (PRAXIS). Multi-mode fibers should be used and the number of modes has to be large enough to capture a sufficient amount of light from the telescope. However, the fiber Bragg gratings can only be inscribed in the single-mode fiber. A photonic lantern bi-directionally converts multi-mode to single-mode. The number of cores in MCFBGs corresponds to the mode. For a writing system consisting of a single ultra-violet (UV) laser and phase mask, the standard writing method is insufficient to produce uniform MCFBGs due to the spatial variations of the field at each core within the fiber. Most significant technical challenges are consequences of the side-on illumination of the fiber. Firstly, the fiber cladding acts as a cylindrical lens, narrowing the incident beam as it passes through the air-cladding interface. Consequently, cores receive reduced or zero illumination, while the focusing induces variations in the power at those that are exposed. The second effect is the shadowing of the furthest cores by the cores nearest to the light source. Due to a higher refractive index of cores than the cladding, diffraction occurs at each core-cladding interface as well as cores absorb the light. As a result, any core that is located directly behind another in the beam path is underexposed or exposed to a distorted interference pattern from what phase mask originally generates. Technologies are discussed to overcome the problems and recent experimental results are presented as well as simulation results.