• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.100-110
• /
• 2008

It is not easy to monitor and identify all engine faults and conditions using conventional fault detection approaches like the GPA (Gas Path Analysis) method due to the nature and complexity of the faults. This study therefore focuses on a model based diagnostic method using Neural Network algorithms proposed for fault detection on a turbo shaft engine (PW 206C) selected as the power plant for a tilt rotor type unmanned aerial vehicle (Smart UAV). The model based diagnosis should be performed by a precise performance model. However component maps for the performance model were not provided by the engine manufacturer. Therefore they were generated by a new component map generation method, namely hybrid method using system identification and genetic algorithms that identifies inversely component characteristics from limited performance deck data provided by the engine manufacturer. Performance simulations at different operating conditions were performed on the PW206C turbo shaft engine using SIMULINK. In order to train the proposed BPNN (Back Propagation Neural Network), performance data sets obtained from performance analysis results using various implanted component degradations were used. The trained NN system could reasonably detect the faulted components including the fault pattern and quantity of the study engine at various operating conditions.

• Nuclear Engineering and Technology
• /
• v.38 no.4
• /
• pp.343-352
• /
• 2006

Convenient analytical tools for evaluation of the aperiodic and the fluctuating instabilities of the passive residual heat removal system (PRHRS) of an integral reactor are developed and results are discussed from the viewpoint of the system design. First, a static model for the aperiodic instability using the system hydraulic loss relation and the downcomer feedwater heating equations is developed. The calculated hydraulic relation between the pressure drop and the feedwater flow rate shows that several static states can exist with various numbers of water-mode feedwater module pipes. It is shown that the most probable state can exist by basic physical reasoning, that there is no flow rate through the steam-mode feedwater module pipes. Second, a dynamic model for the fluctuating instability due to steam generation retardation in the steam generator and the dynamic interaction of two compressible volumes, that is, the steam volume of the main steam pipe lines and the gas volume of the compensating tank is formulated and the D-decomposition method is applied after linearization of the governing equations. The results show that the PRHRS becomes stabilized with a smaller volume compensating tank, a larger volume steam space and higher hydraulic resistance of the path $a_{ct}$. Increasing the operating steam pressure has a stabilizing effect. The analytical model and the results obtained from this study will be utilized for PRHRS performance improvement.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.34-41
• /
• 2008

Existing mobility support scheme like MIPv4 has the delay at data transfer and Triangle routing problem. This paper proposes the new mobility support scheme and method that can overcome the problem using MPLS LSP in Next Generation Network. The proposed scheme overcomes the problem by introducing the LMS(Location Management Server) managing the location of the mobile terminal and the MPLS LSP between FA for a tunneling. We shows on the mathematical analysis using the queuing theory that this proposed scheme is more superior to the existing method(MIP).

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.179-184
• /
• 2002

We consider the heterogeneous fleet vehicle routing problem (HVRP), a variant of the classical vehicle routing problem (VRP). The HVRP differs from the classical VRP in that it deals with a heterogeneous fleet of vehicles having various capacities, fixed costs, and variables costs. Therefore the HVRP is to find the fleet composition and a set of routes with minimum total cost. We give an integer programming formulation of the problem and propose an algorithm to solve it. Although the formulation has exponentially many variables, we can efficiently solve the linear programming relaxation of it by using the column generation technique. To generate profitable columns we solve a shortest path problem with capacity constraints using dynamic programming. After solving the linear programming relaxation, we apply a branch-and-bound procedure. We test the proposed algorithm on a set of benchmark instances. Test results show that the algorithm gives best-known solutions to almost all instances.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2013

In the next generation of mobile communication systems, high data rates and high capacity will be possible if multiple antennas are used at new frequencies. This paper presents the correlations between channel parameter path loss (PL), delay spread (DS), angular spread (AS) and K-factor established based on channel measurements. To avoid interference from Korean DTV broadcasting, we measured the channel characteristics in urban/rural/suburban areas on Jeju Island using a channel sounder and $4{\times}4$ antennas. The correlations between channel parameter show that the wireless channel characteristics can be determined and effective communication system design can be produced for use in similar environments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.135-140
• /
• 2016

In this study, we developed the solution-processed PMMA-$HfO_x$ hybrid ReRAM devices to overcome the respective drawbacks of organic and inorganic materials. The performances of PMMA-$HfO_x$ hybrid ReRAM were compared to those of PMMA- and $HfO_x$-based ReRAMs. Bipolar resistive switching behavior was observed from these ReRAMs. The PMMA-$HfO_x$ hybrid ReRAMs showed a larger operation voltage margin and memory window than PMMA-based and $HfO_x$-based ReRAMs. The reliability and electrical instability of ReRAMs were remarkably improved by blending the $HfO_x$ into PMMA. An Ohmic conduction path was commonly generated in the LRS (low resistance state). In HRS (high resistance state), the PMMA-based ReRAM showed SCLC (space charge limited conduction). the PMMA-$HfO_x$ hybrid ReRAM and $HfO_x$-based ReRAM revealed the Pool-Frenkel conduction. As a result of flexibility test, serious defects were generated in $HfO_x$ film deposited on PI (polyimide) substrate. On the other hand, the PMMA and PMMA-$HfO_x$ films showed an excellent flexibility without defect generation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.5
• /
• pp.281-296
• /
• 2015

This paper describes a novel disaster evacuation system using embedded systems such as smart devices for crisis and emergency management. In indoor environments deployed with the Bluetooth Low Energy(BLE) beacons, smart devices detect their indoor positions from beacon messages and interact with Map Server(MS) and Route Server(RS) in the Internet over the LTE and/or Wi-Fi functions. The MS and RS generate an optimal path to the nearest emergency exit based on a novel graph generation method for less route computation, called the Disaster Evacuation Graph(DEG), for each smart device. The DEG also enables efficient processing of some constraints in the computation of route, such as load balancing in situation of different capacities of paths or exits. All data interfaces among three system components, the MS, RS, smart devices, have been defined for modular implementation of our disaster evacuation system. Our experimental system has been deployed and tested in our building thoroughly and gives a good evidence that the modular design of the system and a novel approach to compute emergency route based on the DEG is competitive and viable.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.53-60
• /
• 2005

Community Wireless Networks define the next generation wireless services. Multimedia usages for financial services over community Wireless LAN (WLAN) based mesh networks require link stability. Several new services are being proposed for multimedia over WLANs. Portable Internet Services are implemented by several wireless carriers to proliferate their customer base. However, these services are still expensive and require a central telecom/wireless carrier whose monopoly and preference defines the availability of new services. Our research project identifies the usage of these critical services in public places over the financial services backbone architecture to provide efficient easy-to-use and economical services to their customers and merchants without being dependent on the central wireless carrier. The user connects to the network using his regular WLAN NIC using the Mesh Router/Bridge interconnectivity and obtains the needed multimedia and financial services from the ATM-AP Gateway, In our proposed scenario, the ATN AP-MR use AODV protocol and MR-MC is based on 802.11g/a/b IEEE standard. We use multi path routing protocols for reducing the congestion over a particular route. We demonstrate the results of our simulations and test-bed outcome to evaluate link failure rate and oversubscription factors to eliminate network congestion and non-availability of the critical financial services.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.153-162
• /
• 2016

Given their structural arrangement, photovoltaic (PV) modules exhibit parasitic capacitance, which creates a path for high-frequency current during zero-state switching of the converter in transformerless systems. This current has to be limited to ensure safety and electromagnetic compatibility. Many solutions that can minimize or completely avoid this phenomenon, are available. However, most of these solutions are patented because they rely on specific and often complex converter topologies. This study aims to solve this problem by introducing a solution based on a classic converter topology with an appropriate modulation technique and passive filtering. A 5.5 kW single-phase residential PV system that consists of DC-DC boost stage and DC-AC H-bridge converter is considered. Control schemes for both converter stages are presented. An overview of existing modulation techniques for H-bridge converter is provided, and a modification of hybrid modulation is proposed. A system prototype is built for the experimental verification. As shown in the study, with simple filtering and proper selection of switching states, achieving low leakage current level is possible while maintaining high converter efficiency and required energy quality.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.4
• /
• pp.776-795
• /
• 2006

This paper aims at examining technological catching-up in the Korean IT SoC industry using the theories of technological catching-up and sectoral system of innovation. The Korean IT SoC industry has accomplished rapid technological catching-up by the process of variety generation and selection. In the process, Korean fabless ventures have pursued the technological path-creative pattern in niche markets. But the cooperative networks among various firms are prerequisite for the coevolution of sectoral innovation system.