• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.301-310
• /
• 2004

In this paper, a compact dual-mode filter structure without coupling gaps is proposed. The novel design is achieved by embedding a pair of equal crossed slots and spur-lines. Without coupling gaps between feed lines and patch resonator, the new filter can provide low insertion loss. It is found that this design has wide coupling range for dual-mode operation. It means that these characteristics of the proposed filter can reduce uncertainty in fabrication. By using two PIN diodes mounted inside a pair of spur-lines, the proposed structure works as a switchable filter. Also, it has a size reduction of about 34.7 %, compared with conventional dual-mode filters.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.763-768
• /
• 2015

In this paper, a microstrip patch antenna with arrow and ribbon shape for WLAN was designed and manufactured. The antenna was designed on a FR-4 substrate that has a thickness of 0.8mm and a dielectric constant of 4.4. The substrate size is $50{\times}40mm^2$. A commercially available tool was used for simulation to get the optimized parameters and the optimized values were obtained by finding the parameters that act sensitively to the performance of the antenna. The proposed antenna was produced using the optimized values, and characteristics of return loss, gain and radiation pattern in WLAN bands were measured.

• 한국생태학회:학술대회논문집
• /
• 2002.08a
• /
• pp.71-77
• /
• 2002

For landscape ecological management of the isolated forestlands in Incheon city located in the western tip of South Korea, the forest vegetation of Mt. Cheolma was classified phytosciologically and mapped out its spatial distribution at a scale of 1:5,000. Characteristics of forest landscape structures were discussed in terms of the number and size of patches obtained by analyzing vegetation map. Units to manage the forest vegetation were categorized into eighteen communities, seventeen groups, and sixteen subgroups. Landscape elements were classified into five types: secondary vegetation, introduced vegetation for forestry (IVF), introduced vegetation for agriculture (IVA), and other elements. Two hundred and ninety-three forest landscape patches covers 443.3ha of which IVF accounted for 316.8ha(71.5%), the largest portion, secondary vegetation for f01.2ha(22.8%), IVA for 6.2ha(1.4%), and others for 19.1ha(4.3%). The ratio of natural forest elements of 31.9% showed that this area was mainly comprised of artificially introduced vegetation, such as Robinia pseudoacacia plantation and Pinus rigida plantation. Forest landscape patches have a mean area of 4.5ha, a density of 66.1/100ha, and a diversity index of 0.87. It was estimated that differentiation of patches recognized in community level would be related to human interference and those in subordinate level to natural processes.

• Journal of Chest Surgery
• /
• v.36 no.4
• /
• pp.273-276
• /
• 2003

We report a surgical case of 39-year-old male with a pseudoaneurysm of the left ventricle. Four years ago, the patient underwent aortic and mitral valve replacements with mechanical valves and abscess removal for infective endocarditis with annular abscess. Recent echocardiography demonstrated a communication between left ventricle and abscess pocket, and the size of pocket increased further at the follow-up echocardiography. The patient underwent patch closure of the defect between left ventricle and pseudoaneurysm located at the aortomitral fibrous continuity, under the cardiopulmonary bypass and cardioplegia. The postoperative course was uneventful and the patient was discharged on the 9th postoperative day.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2253-2265
• /
• 2012

A novel folded dipole type microstrip patch antenna designed for ultrahigh frequency (UHF) band radio frequency identification (RFID) tag is presented in this paper, which can be used on the metallic objects. The presented antenna is fabricated on a very thin Rogers 5880 substrate with a thickness of 0.508 mm. The structure consists of two folded dipole and two symmetrical shorting pins placed at both sides of feed point. An adjustable frequency response can be easy obtained via modify the location and radius of the shorting pins. The antenna has been analyzed by full wave simulations soft. The simulated bandwidth is about 67.2 MHz, which covers the Europe and North America UHF RFID frequency range. A manufactured prototype has been fabricated and measured to demonstrate the antenna performances. The simulation results agree with the measurement data well. The measured maximum reading range of the prototype can be reached 4.1 m in free space, and 3.2 m on a metal plate whose size is $150{\times}150{\times}8mm^3$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.92-98
• /
• 2010

Virtual ground modeling is one of key topic for real-time vehicle dynamic simulation. This paper discusses about the virtual 3D road modeling process using parametric surface concept. General road data is a type of lumped position vector so interpolation process is required to compute contact of internal surface. The parametric surface has continuity and linearity within boundaries and functions are very simple to find out contact point. In this paper, the parametric surface formula is adopted to road modeling to calculate road hight. Position indexing method is proposed to reduce memory size and resource possession, and a simple mathematical method for contact patch searching is also proposed. The developed road process program is tested in dynamic driving simulation on off-road. Conclusively, the new virtual road program shows high performance of road hight computation in vast field of off-road simulation.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.42-49
• /
• 2007

This paper implements RFID(radio-frequency identification)System to which the system was apply SS(Spread Spectrum) method. The system designed by using the algorithm for microprocessor with PLL of the receiver, PN spread, modulation and demodulation of the transceiver, and transistor amplifier for the output of stabilized BPSK (Binary Phase Shift Keying) signal. furthermore, it reduced the interference of the signal by designing the micro-strip narrow banded patch antenna, which is convenient for printing and producing, and decreased the volume of filter size in the system. It is also designed for the lower powered system with the possible application to UHF band of $860\sim930MHz$ for the international standard frequency band, which is the quota share of RFID distribution system.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.75.1-75.1
• /
• 2014

Sunspot penumbrae show supersonic downflow patches along the periphery. These patches are believed to be the return channels of the Evershed flow. There was previous study to investigate their structure in detail using Hinode SOT/SP observations (M. van Noort et al. 2013) but their data sample was only two sunspots. To make general description it needs to check more sunspot sample. We selected 242 downflow patches of 17 sunspots using Hinode SOT/SP observations from 2006 to 2012. Height-dependent maps of atmospheric parameters of these downflows was produced by using HeLix which was height dependent LTE inversion code of Stokes profiles. The inversion code at high resolution allows for the accurate determination of small scale structures. The recovered atmospheric structure of three layers indicates that regions with very high downflow velocities contain very strong magnetic fields reaching up to 7kG. The higher downflow velocity patches have bigger patch size. Magnetic fields of downflow patches are more vertical while penumbra shows horizontal field and neighbor of downflow patches have opposite polarity. Temperature of downflow patches at highest layer have more strong value than penumbra at deepest layer. The direction of velocity of downflow patches at highest layer have two branches. These result shows that we can expect some heating precess in the middle of layer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.77-78
• /
• 2016

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for meandered type patch antenna ($20mm{\times}20mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) size of $20mm{\times}60mm$. Antenna parameters was calculated by using the OpenFDTD simulator. As a result, frequency bandwidth satisfying the condition of VSWR(2:1) was 1.82-3.05GHz (1.23GHz, 44.6%) for considering WLAN.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.749-751
• /
• 2016

Internet technology is universal, news from the Web browser, shopping, search, etc., various activities have been carried out. Its size becomes large, increasing the scale of information security incidents, as damage to this increases the safety for the use of the Internet is emphasized. IE browser is ASLR, such as Isolated Heap, but has been continually patch a number of vulnerabilities, such as various protection measures, this vulnerability, have come up constantly. And, therefore, in order to prevent security incidents, it is necessary to be removed to find before that is used to exploit this vulnerability. Therefore, in this paper, we introduce the purge is a technique that is used in the discovery of the vulnerability, we describe the automation technology related thereto. And utilizing the known vulnerabilities, and try to show any of the typical procedures for the analysis of the vulnerability.