• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.435-439
• /
• 2019

Purpose: This study evaluated the efficacy of blood mixed cement for osteoporotic vertebral compression fractures in reducing the complications of percutaneous vertebroplasty using conventional cement. Materials and Methods: This study was performed retrospectively in 80 patients, from January 2016 to January 2017. Porous cement was formed by mixing 2, 4, and 6 ml of blood with 20 g of cement used previously. A tube with a diameter and length of 2.8 mm and 215 mm, respectively, was used and the polymerization temperature, setting time, and optimal passing-time were measured and compared with those using only conventional cement. Radiologically, the results were evaluated and compared. Results: The polymerization temperature was 70.3℃, 55.3℃, 52.7℃, and 45.5℃ in the conventional cement (R), 2 ml (B2), 4 ml (B4), and 6 ml (B6), respectively, and the corresponding setting time decreased from 960 seconds (R) to 558 seconds (B2), 533 seconds (B4), and 500 seconds (B6). The optimal passing-time was 45 seconds (B2), 60 seconds (B4), and 78 seconds (B6) at 73 seconds (R), respectively and as the amount of blood increased, it was similar to the cement passing-time. The radiological results showed that the height restoration rates and the vertebral subsidence rates similar among the groups. Two cases of adjacent vertebral compression fractures in the R group and one in the B2 and B4 groups were encountered, and the leakage rate of the cement was approximately two times higher than that in the conventional cement group. Conclusion: In conventional percutaneous vertebroplasty, the procedure of using autologous blood with cement decreased the polymerization temperature, reduced the setting time, and the incidence of cement leakage was low. These properties may contribute to more favorable mechanical properties that can reduce the complications compared to conventional cements alone.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.535-542
• /
• 1995

In this paper we present two preconditioners for solving large sparse linear systems arising from elliptic partial differential equations on massively parallel machines, such as the CM-5. Most massively parallel machines do heavily rely on the message-passing for the interprocessor communications. but according to the current manufacturing standards the cost of communications is very high compared to that of floating point arithmetic computations. Due to this we need an algorithm which minimizes the amount of interprocessor communication on the massively parallel machines. We will show that Block SOR(Successive Over Relaxation) method coupled with the multi-coloring technique is one of such preconditioner on the massively parallel machines, by conducting experiments in the CM-5. Also, we implemented the ADI(Alternation Direction Implicit) method in the CM-5, which has been conventionally one of the most powerful parallel preconditioner. Our experiment shows that Block SOR method coupled with the multi-coloring technique could yield a speedup with 50% efficiency with the range of number of processors form 16 to 512 for a matrix with dimension 512x512. On the other hand, the ADI method shows a very poor performance.

• Atmosphere
• /
• v.19 no.1
• /
• pp.9-36
• /
• 2009

Two heavy snowfall events occurred in Yeongnam and Yeongdong regions of the Korean Peninsula during the period from 4 to 6 March 2005 are analyzed. The events were developed by two different meso-scale snow clouds associated with an extratropical low passing over the Western Pacific. Based on synoptic data, GOES-9 satellite images, and precipitation amount data, the events were named as Sokcho and Busan cases, respectively. We analyzed the development mechanism of the events using meterological variables from the NCEP(National Centers for Environmental Prediction) /NCAR(National Centers for Atmospheric Research) reanalysis data such as potential vorticity(PV), divergence, tropopause undulation, static stability, and meridional wind circulation. The present analyses show that in the case of Sokcho, the cyclonic circulation in the lower atmosphere in the strong baroclinic region induced the cyclonic circulation in the upper atmosphere. The cyclonic circulation in the lower and upper atmosphere caused a heavy snowfall in the Sokcho region. In the case of Busan, the strong cyclonic circulation in the upper atmosphere was initiated by the stratospheric air intrusion with the high positive PV into the troposphere during the tropopause folding. The upper strong cyclonic circulation enhanced the cyclonic circulation in the lower disturbed atmosphere due to the extratropical low. This lower cyclonic circulation in turn, intensified the upper cyclonic circulation, that caused a heavy snowfall in the Busan region.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.659-664
• /
• 2011

Staphylococcus aureus (SA) bacteremia is associated with high mortality, and often results in metastatic infections. The methicillin-resistant SA (MRSA) is an urgent health care issue, as nosocomial infections with these bacteria represent limited treatment alternatives. Samples of whole blood containing challenge inoculums of SA and MRSA strains were passed through columns packed with surfaceheparinized polyethylene beads. The bound bacteria were eluted and quantitatively determined by culturing and by real-time PCR. Significant amounts of both SA and MRSA adhered to the heparinized beads (more than 65% of inoculated bacteria). After rinsing with buffer at high ionic strength, viable bacteria or bacterial DNA were eluted from the columns, indicating that the binding was specific. The conclusions that can be made from these experiments are that, as earlier reported in the literature, the high affinity of SA to heparin is retained in whole blood, and MRSA in whole blood binds to heparin with similar or higher affinity than SA. It should be possible to lower the amount of SA and/or MRSA from the blood of infected patients to levels that could be taken care of by the immune system. In previous studies, we have shown that passing blood from septic patients over beads coated with end-point-attached, biologically active heparin is a useful technique for regulating the levels of heparinbinding cytokine. These findings in combination with the present findings indicate the possibility of creating an apheresis technology for treatment of sepsis caused by SA and/or MRSA.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.172.2-172.2
• /
• 2010

This study was carried out in order to reduce the installation expense of heating system for greenhouse comparing to geothermal heat pump and develope the coefficient of performance (COP) for a heat pump. For getting plenty of heat flux from geothermal energy. Surface water in river channel was used for getting a lots of geothermal heat by penetrating water through underground soil layer of the river bank that make heat transmission to passing water. The range of water temperature after the process of Ground filtration is 13~18 degrees celsius which is very similar to low heat source of geothermal heat pump system and the plenty amount of heat source from that make the number of geothermal heat exchanging hole and the expense for geothermal heat exchanger construction reduced. Drainage well is also used for returning filtration water to the aquifer that keep the water good recirculation from losing geothermal heat and water resource. For the COP improvement of Heat pump, thermal storage tank with separating insulation plate according to the temperature difference make the COP of Heat pump that is similar to thermal storage tank with diffuser. Developed thermal storage tank make construction expense cheaper than customarily used one's. and that sand filter and oxidation sand (FELOX) are going to be used for improving ground filtration water quality that make heat exchanger efficiency better. All above developed component skill are going to be set on the Ground filtration water source heat pump system and applied for medium, large scale for protected greenhouse in riverside area and on-site experiment is going to do for optimizing the heating system function and overcome the problem happening in the process of on-site application afterward.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.14-20
• /
• 2015

A Large Eddy Simulation(LES) was performed for the prediction of unsteady dispersion behavior of hydrogen fluoride (HF). The HF leakage accident occurred at the Gumi fourth industrial complex was numerically investigated using the Fire Dynamics Simulator (FDS) based on the LES. The accident area was modeled three-dimensionally and time-varying boundary conditions for wind were adopted in the simulation for considering the realistic accident conditions. The Message Passing Interface (MPI) parallel computation technique was used to reduce the computational time. As a result, it was found that the present LES simulation could predict the unsteady dispersion features of HF near the accident area effectively. The dispersion behaviors of the leaked HF was much affected by the unsteady wind direction. The LES could predict the time variation of the HF concentration reasonably and give an useful information for the risk analysis while the prediction with the time-averaging concept of HF concentration had a limitation for the amount of HF concentration at specific location point. It was identified that the LES is very useful to predict the dispersion characteristics of hazardous chemicals.

• Journal of KIISE
• /
• v.44 no.1
• /
• pp.51-56
• /
• 2017

The research area for solving question answering (QA) problems using artificial intelligence models is in a methodological transition period, and one such architecture, the dynamic memory network (DMN), is drawing attention for two key attributes: its attention mechanism defined by neural network operations and its modular architecture imitating cognition processes during QA of human. In this paper, we increased accuracy of the inferred answers, by adapting an automatic data augmentation method for lacking amount of training data, and by improving the ability of time perception. The experimental results showed that in the 1K-bAbI tasks, the modified DMN achieves 89.21% accuracy and passes twelve tasks which is 13.58% higher with passing four more tasks, as compared with one implementation of DMN. Additionally, DMN's word embedding vectors form strong clusters after training. Moreover, the number of episodic passes and that of supporting facts shows direct correlation, which affects the performance significantly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1843-1850
• /
• 2004

If the location information of a great number of cars kept for business with telematics terminals is acquired and managed efficiently, this information forms the foundation for controlling cars and traffic flows. The studies on the pure spatial indices have focused on the efficient retrievals. However, the acquisition and management of the terminal location of moving objects are more important than the efficiency of the query processing in the moving object databases. Therefore, it will be need to adopt parallel processing system for the moving object databases which should maintain the object's current location as precise as possible. This paper proposes a location management system using CDMA communications of telematics terminals. More precisely, we propose a architecture of spatial indexing mobile objects using multiple processors, and also newly propose a method of splitting buckets using the properties of moving objects in order to minimize the number of database updates. We also propose a acquisition method for gathering the location information of moving objects and passing the information of the bucket extents in order to reduce the amount of passed messages between processors.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.8-17
• /
• 2014

Petascale systems(so called supercomputers) have been mainly used for supporting communication-intensive and tightly-coupled parallel computations based on message passing interfaces such as MPI(HPC: High-Performance Computing). On the other hand, computing paradigms such as High-Throughput Computing(HTC) mainly target compute-intensive (relatively low I/O requirements) applications consisting of many loosely-coupled tasks(there is no communication needed between them). In Korea, recently emerging applications from various scientific fields such as pharmaceutical domain, high-energy physics, and nuclear physics require a very large amount of computing power that cannot be supported by a single type of computing resources. In this paper, we present our HTCaaS(High-Throughput Computing as a Service) which can leverage national distributed computing resources in Korea to support these challenging HTC applications and describe the details of our system architecture, job execution scenario and case studies of various scientific applications.

• Journal of Biosystems Engineering
• /
• v.26 no.6
• /
• pp.563-570
• /
• 2001

To develop a stalk detaching system the effect of shape factor of red pepper affecting the performance of unfolding, arranging and cutting was analysed. The obtained results are as follows : By cutting experiment, it was found that the bending of stalk affected the cutting rate of stalk, and that the bending of body increased the amount of peppers that were expelled from the cutting guide by conveying brush. The ratios, 'bending length of a body/body length'and 'bending length of a stalk/stalk length', could be used as criteria far abnormality of body and stalk of peppers, respectively. As a result of experiment, it was concluded that mechanical treatment would be difficult for the peppers with indexes greater than 0.4 and 0.3 fur body bending and stack bending. respectively. So, these indexes were used as criteria for distinguishing abnormality from normality of peppers. In the unfolding unit, conveyance of peppers was impossible for both of normal and abnormal ones at the inclination angle of 10°, especially, at the frequency of 8.3 Hz peppers maintained stationary state. At the inclination angle of 20°, both of normal and abnormal peppers showed similar tendencies, but abnormal ones showed an accumulation trend gradually with increased feeding speed. In the arranging unit, conveyance of peppers was almost impossible for both of normal and abnormal ones at the inclination angle of 20°, showing almost no difference between the conveyances of normal and abnormal ones. In the case of the inclination angle of 30°, at the condition of the feeding speeds and frequency corresponding 0.06 m/s, 0.08 m/s and 8.3 Hz, respectively, the passing time of the abnormal peppers on the arranging plate increased rapidly.