• 한국분무공학회지
• /
• 제23권3호
• /
• pp.122-127
• /
• 2018

Recently, registrated passenger cars have increased and were close about seventy million at the end 2017 year in Korea. Among the passenger car using gasoline fuel make up forty six percentage of total registrated vehicles. In this study, investigation on real driving emission characteristics in the passenger car using gasoline fuel with various engine displacements were carried out. The real driving emission characteristics were measured and analyzed by using PEMS (Portable Emission Measurement System). PEMS was composed of gas analyzer, emission flow meter and sample conditioning system et al. Also, test six vehicles were selected to the gasoline passenger car with engine displacement from 1.6L to 3.7L. Two test routes with engine start of cold and hot conditions were applied to analyze the emission characteristics of RDE, respectively. The results show that the $CO_2$ emission have a increasing trend as the engine displacement and vehicle weight. Also, it is guessed that the $CO_2$ emission and vehicle weight were more correlated than the engine displacements. On the other hand, NOx emissions of RDE have not increasing or decreasing tendency according engine displacements or vehicle weight because the activation of three-way catalyst in the gasoline vehicles.

• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.134-143
• /
• 2008

The hardware scatters as well as the engine parameters calibration have strong influences on exhaust emissions in recent diesel engines. In this research DoE(Design of Experiments) optimizations were done to study the possibility of minimizing the emission deviations caused by flow rate scatters of the injectors. It has been shown that the optimization of engine calibration, which minimizes the emission deviations, is feasible by establishing a target function representing the emission deviations for test results of maximum, mean and minimum flow rate injectors. It has also been shown that optimization of both emission deviations and emission level is possible by sequential DoE optimizations of the target functions representing the emission level and the emission deviations respectively with the appropriate boundary limits.

• 대한기계학회논문집B
• /
• 제31권12호
• /
• pp.1024-1032
• /
• 2007

The flow characteristics with the impinging angles of defrost nozzle jet inside a commercial vehicle passenger compartment were investigated experimentally by using the two-dimensional duct-nozzle model. The shape of the nozzle contraction was designed according to the curved line of cubic equation to the vertical plan of the flow direction. The impinging angles, defined as the angle between nozzle axis and a vertical line to the windshield, were varied from the $0^{\circ}\;to\;80^{\circ}$. The mean velocity distributions, the half-widths, and the momentum distributions with the cases of both the free jet and the impinging jet onto the dummy windshield were measured. The impinging jet flows similarly with wall jet from $X/b_o=20$, and the impinging angle has an effect on the half-width of the impinging jet. The momentum distributions onto the windshield increased with the increase of impinging angle, and then their inflection point was observed around the impinging angle of $60^{\circ}$.

• 한국경제지리학회지
• /
• 제14권2호
• /
• pp.116-128
• /
• 2011

서울 수도권 지하철 승객이 인터넷으로 구매한 채소 등의 신선 식품을 퇴근하는 도중에 이동 경로상의 지하철역 구내의 서비스 시설물에서 배달 받는다고 가정하면, 제기되는 문제는 어떤 지하철역에 서비스 시설물을 설치하면 얼마나 많은 승객들이 이용하는 가를 파악하는 것이다. 이러한 문제는 픽업 문제로 알려져 있고, 픽업 문제를 풀려면 교통 흐름을 설명하는 교통 네트워크가 있어야 되고 각 교통 흐름의 이동 경로도 알 수 있어야 된다. 서울 수도권 교통카드 시스템의 교통카드 트랜잭션 데이터베이스로부터 지하철 승객의 출발역에서 도착역까지 움직이는 이동 경로인 승객 흐름을 구할 수 있으므로, 서울 수도권 지하철 교통 시스템에서 픽업 문제는 승객 흐름을 최대한 많이 포착하는 서비스 시설물들을 설치할 지하철역들을 선정하는 것이다. 본 논문에서 서울 수도권 지하철 시스템과 지하철 승객들의 흐름을 픽업 문제의 모델에 맞추어 수식화하였고, 이를 기반으로 하여 지하철 승객들의 흐름을 기종점 통행 행렬을 만들어 단계별로 가장 많은 통과 승객수를 갖는 픽업 역을 계산해내는 빠른 휴리스틱 알고리즘을 제안하였다. 대용량 교통 네트워크와 교통 흐름에 해당되는 약 400여 개의 지하철역을 가진 서울 수도권 지하철 네트워크와 약 500만 명의 지하철 교통카드 트랜잭션들을 입력으로 하여 제안된 알고리즘으로 선정된 픽업 역들을 빠른 시간 내에 얻었고, 그 중에서 상위 10개 픽업 역들을 지하철 안내 지도에 표시하여 설명하였다. 그리고, 그 결과가 거의 최적해와 같음을 추가 실험을 통하여 검증하였다.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.35-46
• /
• 1997

In order to satisfy customer's requirements of ride comfort and high performance, it is necessary for designers to fully understand vehicle aerodynamics and wind noise of newly produced cars because characteristics of flow and wind noise are heavily dependent on each other. In this study numerical and experimental study have been carried out to analyse the effect of flow characteristics at around of rear view mirror on wind noise and soiling on the front S/W. As a result, it's found that the spiral flow mear the front pillar is weakened and spreaded because rear view mirror obstructs the flow. It is also shown that there is abrupt change of gradient of separa- tion line, separation area, intensity of spiral flow and turbulent kinetic energy with varying shape of neck and housing of rear view mirror.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.13-22
• /
• 1996

The quality requirements for metal forming products have become more strict. Machined parts, which could be produced only by cutting, can now be formed plastically. In order to reach the mechanical strength and geometrical accuracy, reasonable production technologies should be developed. In this presentation, some basic flow-press-technologies in the metal forming are introduced. Some real sample parts for a passenger can are shown and their forming plans are explained. Also problems and solutions for the production of bevel gears are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.698-703
• /
• 1990

This paper describes an Electronically-controlled Power Steering system which is developed by the modification of a conventional power steering based on so called rotary valve technology. The steering effort is influenced by the electrohydraulic flow rate control of the pressurized oil to rotary valve. The vehicle speed and the steering angular velocity are used to calculate and output a signal to proportional flow rate control valve by the Electronic Control Unit. The improvement of the steering feel was satisfactory compared with that of the original conventional power steering.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2573-2578
• /
• 2007

In order to investigate the vortex body frame interaction around the side mirror of a passenger car, velocity vector fields in the wake, pressure distributions and boundary layer flows over both the mirror surface and the mirror housing, have been measured by several experimental tools. It was resulted that only within an half downstream distance of the mirror span there appears the recirculation zone, and also found that vortex trail towards to the driver side window between A and B pillars, making the acoustic noise and vibration. Wake vortex rolls up after this recirculating zone and makes the trail of the vortex center towards the driver side window, which was also confirmed by measurements of wake velocity vectors in the vertical sections of the trail and visualization over the side mirror surfaces as well. It was also observed that total pressure distribution over the mirror surface has the minimum peak near the lower tip region which can be considered as the origin of the vortex center. It can be concluded that the geometrical modification of the lower tip and the upper root area of the mirror housing is the key to control the wake vortex.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.87-100
• /
• 1999

This study was focused on analyzing the headway of various types of trailer in Pusan city with the high heavy vehicle rate. Then Passenger Car Equivalent(PCE) was calibrated in order to identify the impact of trailers in the traffic flow at the signalized intersections. To fulfill this goal types of trailer were classified into five categories such as full trailer semi-trailer unloaded semi-trailer semi-trailer loaded with 20ft container and semi-trailer loaded with 40ft container and Passenger Car Equivalents were identified. the Results are as follows: 1) The PCE’s were 2.64, 1.51, 2.09, 2.16 and 2.23 respectively. 2) The saturation flow rate on the signalized intersection was lower than that on the multi-lane highway in the big city of Korea. 3) The start-up delay on the thru lane was similar to the average value in our country but the start-up delay on the left-turn lane was longer than the average value in our country by the impact of container Vehicles.

• 농촌계획
• /
• 제23권2호
• /
• pp.43-54
• /
• 2017

When an age of low growth and population decline, population migration plays an important role in spatial structure of region. There have been many researches on migration and regional spatial structure. The purpose of this study is to examine the changes of Gwangju and Jeonnam region's spatial structure and central area using social network analysis methods. For analysis it was used that population and migration data and passenger OD(Origin and Destination) travel data released by Statistics Korea and Korea Transport Database(KTDB). Using Gephi 0.8.2, migration and passenger OD networks were visualized, and this describe network flow and density. The results of the network centrality analysis show that the most populated village is not always network center though population mass is an important factor of central places. The average eigenvector centrality of 2010 migration is the lowest during 2005-2015, and it means few regions have high centralities. When comparing migration and travel networks, travel data is more effective than migration data in determining the central location considering spatial functions.