• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.994-999
• /
• 2007

The particulate matters emitted by diesel locomotives cause serious air pollution in stations and railroad. There have been various attempt to reduce the air pollution from diesel bus or trucks. However, the air pollution from the diesel locomotives has been out of control because there has not any adaptable technology. In this study, a diesel particulate filter was developed and applied to the diesel locomotives. A 3,000 horsepower large-scale locomotive and a 1,500 horsepower middle-scale locomotive were used for the test of the filter. The particulate matter emissions before and after the treatment was monitored by a scanning mobility particle sizer and a dust monitor. As a result, it was observed that the particulate matters could be successfully removed from the emission gases by using the filter.

• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.116-122
• /
• 2004

The purpose of this study is to investigate effects of computer animations using particulate model in elementary science classes related to air pressure. To do those, four classes of 5th grade in an elementary school located in a city were selected. As an experiment group, two classes were applied the teaching materials of computer animations developed for this study based on particulate model. The other classes as a control group were not applied these materials in science classes. The total scores of experiment group in which computer animation using particulate model was applied in science classes are higher than those of the control group in the conception test. Only in one conception related to high and low atmospheric air pressure, the scores of the two groups are not significantly different at 0.05 significance level.

• Smart Structures and Systems
• /
• v.1 no.2
• /
• pp.217-233
• /
• 2005

Elastic and electromagnetic waves can be used to gather important information about particulate materials. To facilitate smart geophysical characterization of particulate materials, their fundamental properties are discussed and experimental procedures are presented for both elastic and electromagnetic waves. The first application is related to the characterization of particulate materials using shear waves, concentrating on changes in effective stress during consolidation, multi-phase phenomena with relation to capillarity, and microscale characteristics of particles. The second application involves electromagnetic waves, focusing on stratigraphy detection in layered soils, estimation of void ratio and its spatial distribution, and conduction in unsaturated soils. Experimental results suggest that shear waves allow studying particle contact phenomena and the evolution of interparticle forces, while electromagnetic waves give insight into the characteristics of the fluid phase and its spatial distribution.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.191-202
• /
• 1998

The emission standards for diesel particulates have been continued to become tighter. This article reviews the pore and how to filtering characteristics and how to design the ceramic honeycomb filter which is generally used for diesel particulate filter. And the properties and fabrication methods of other particulate filters, i.e. ceramic fiber candle filter, ceramic foam filter, ceramic cross-flow filter and metal filter, are presented in this review. The results show that though the various filters have been developed and tested in the field, the more efforts are needed for the commercilaization of the diesel particulate filter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.968-975
• /
• 2009

The goals of this research are to understand the regeneration characteristics in diesel particulate filter using the HC injection. This research emphasized on the development of Continuously Regenerating DOC/DPF and HC technology which was the best particulate matters removing technology of current existing technology. This experimental study has been conducted with equipped a Continuously Regenerating DOC/DPF and HC injection on displacement 2.0, 3.3 $\ell$ diesel engine and compared in terms of particulate material and emission. In this study, we could constructed 3 kinds of database according to quantity of temperature to decide the HC injection quantity and develop DOC/DPF ECU algorithm.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.40-48
• /
• 1987

A Mini-Dilution Tunnel is described as a scaled down comparision of a Standard Tunnel. The paper presents the result of experimental investigations on measuring the particulate emission of a diesel engine in a Mini and a Standard Dilution Tunnel. The result offers a contribution to understanding about the influence of several parameters including dilution ratios, mixture temperatures, mixture conditions, filter temperatures, and flow conditions. In the experiment either increasing the filter temperature and mixture temperature at a fixed dilution ratio or increasing the dilution ratio at a fixed filter temperature and mixture temperature resulted in a decrease in the total particulate mass. These changes in total particulate mass were attributed to the changes in the soluble organic fraction of the particulate sample. Also, mass differences between the Mini and the Standard Dilution Tunnel for the same engine conditions were within approximately 15% of each other.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.691-695
• /
• 2018

In this study, we investigate the recycling of aluminum-based metal matrix composites(AMCs) embedded with SiC particulates. The microstructure of the AMCs is characterized by X-ray diffraction and scanning electron microscopy. The possibility of recycling the composite scrap is attempted from the melted alloy and SiC particulates by re-melting, holding and solidification in crucibles. The recovery percentage of the matrix alloy is calculated after a number of holding times, 0, 5, 10, 15, 20, 25 and 30 minutes and for different particulate sizes and weight fractions in the Al matrix. The results show that the recovery percentage of the matrix alloy, as well as the time required for maximum recovery of the matrix, is dependent on the size and weight fraction of SiC particulates. In addition, the percentage recovery increases with particulate size but drops with the particulate fraction in the matrix. The time to reach maximum recovery falls rapidly with an increase in particulate size and fraction.

• Journal of the Korean Society of School Health
• /
• v.33 no.3
• /
• pp.148-155
• /
• 2020

Purpose: The study was performed to identify the relationship between particulate matter and allergic diseases among adolescents in South Korea. Methods: The study used the raw data from the Korean Youth Risk Behavior Web-Based Survey which was performed in 2018. The data of a total of 60,040 students were analyzed, using SPSS 21, by descriptive statistics, t-test, χ2 test, and logistic regression. Results: Allergic diseases among adolescents were showed to be significantly related to gender, age, school record, stress, BMI, insufficient sleep, depression, current drinking, current smoking, and particulate matter concentrations. Conclusion: The findings suggest that a health promotion program that considers particulate matter concentrations be developed to improve the health status of adolescents with allergic diseases.

• Journal of Power System Engineering
• /
• v.17 no.3
• /
• pp.17-22
• /
• 2013

Diesel particulate filter has been adopted in new vehicle with diesel engine. Since the flow of exhaust gas was clogged as particulate matters were deposited in the filter, it have bad effects on a fuel consumption and power. It was investigated that a particulate filtering system with vacuum pump in the exhaust gas line could be free from clogging in previous research. In this study, the effects of water injection and position of inlet port in filtering system on reducing in particulate matter were investigated. It was noticed that particulate matter were decreased remarkable by water injection and moving the position of inlet port.

• Journal of Korean Elementary Science Education
• /
• v.37 no.2
• /
• pp.147-160
• /
• 2018

The purpose of this study is to compare the elementary science curriculum and textbooks of Korea, the United States, Japan, and Singapore to know how the contents on particulate concept of matter is introduced and expressed. In Korea, particulate concept of matter was adopted as a term for 'molecules' in the 3rd through 6th curriculum, and the term for 'particles' was adopted in the 2009 revised curriculum. In the United States, NGSS adopted the term 'particle' in fifth grade. Japan presented the concept of 'particle' as a core concept of matter in the commentary, and the expressions 'particles' were being introduced in the textbooks. But it did not cover particulate nature of matter at the elementary school level in Singapore. An analysis of elementary textbooks in Korea, the United States and Japan except Singapore showed particulate expressions in 'dissolution', 'state change of water', 'gas pressure and volume', 'combustion and extinguishment' units. Korean textbook was only being introduced in 'dissolution' and 'gas pressure and volume', but in the textbooks of Japan and the United States, water was expressed as particles in 'state change of water' unit. Discussion and implication on the introduction of particulate concept to elementary science curriculum and textbooks were suggested based on the results.