• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.210-214
• /
• 2007

Silicon nanoparticles are widely studied as a material with great potential for wide applications. For application to present industry, it should be easy to control the characteristics of nanoparticle including the size and structure. In this paper, we investigated the formation of Si nanoparticle using pulse plasma technology. Plasma technology is already quite common in device industry and the size of nanoparticle can be easily controlled according to plasma pulse duration. An inductively-coupled plasma chamber with RF power (13.56 MHz) was used with DC-biased grid $(-200\sim+200\;V)$ installed above the substrate. In order to measure the shape and size of nanoparticle, TEM was used. It was found that the size of nanoparticles can be controlled well with the plasma pulse duration and the collection efficiency is increased with the use of either negative or positive DC-bias.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.200-204
• /
• 1986

Particle size distribution in a Continuous Mixed Suspension Mixed Crystal Removal (CMSMPR) crystallizer has been analyzed using the Population Balance (PB) model. This method presents difficulties when the growth rate of crystal depends on the crystal size. Recent studies indicate that in many cases the growth rate is dependent on size when the crystal sizes are small. In this study, a Residence Time Distribution(RTD) model was proposed to take the size dependence into account together with an appropriate numerical scheme. When compared with the approximate results based on PB model, RTD model results showed improvements also a nucleation effect which is normally unimportant for steady state analysis. Start-up data for NaCl-Water-Ethanol system was compared with computed values.

• Korean Journal of Metals and Materials
• /
• v.47 no.1
• /
• pp.21-25
• /
• 2009

The reduction of $Ni(OH)_2$ by hydrazine-sodium phosphinate in water and water-diethylene glycol solutions for the preparation of spherical nickel particles has been studied at room temperature. The effect of reaction conditions on the size and morphology of Ni powder was revealed using SEM and XRD analysis technique. It was shown that in the presence of sodium phosphinate the reduction process become activated and a formation of Ni particles was completed within several minutes at room temperature. As a desired result spherical Ni powders with particles size from 0.07 to 2.0 mm were obtained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.61-67
• /
• 2016

This study was carried out in order to investigate the effect of pigment properties in a pre-coating layer on the characteristics of a top-coating layer and the print mottle of the coated paper. Five different pigments were applied for this study as raw materials for the pre-coating layer. The properties and print mottle of the coated paper samples were evaluated according to the coating color formulation. Type of pigments appliied in a pre-coating layer was one of the most important factor to control the properties of pre and top coating layer. Surface properties of pre and top coated paper were improved by blending GCC which had smaller particle size, with clay. Properties of a top-coating layer was affected by the pigment properties used in the pre-coating layer. It was found that print mottle of coated paper can be improved by replacing part of GCC with smaller particle size GCC or clay in pre-coating layer.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2008

Planetary ball mill was used to decrease and control the particle size of excipients. The effects of the weight of sample and the revolution number of mill, and grinding time on the particle size of the ground sample were analyzed by response surface methodology. The optimum conditions for the milling of microcrystalline cellulose were 38.82 g of the weight of sample and 259 rpm of the revolution number of mill, and 45 minutes of grinding time. The predicted value of the particle size at the these conditions was $19.02{\mu}m$, of which the experimental value at the similar conditions was $18.68{\mu}m$. The tensile strength of tablets of single-component powders, such as microcrystalline cellulose, hydroxypropylmethyl cellulose and starch, binary mixtures and ground binary mixtures of these powder were measured at various relative densities. It was found that the logarithm of the tensile strength of the tablets was proportional to the relative density. A simple model, based upon Ryshkewitch-Duckworth equation that was originally proposed for porous materials, has been developed in order to predict the relationship between the tensile strength and relative density of ground binary tablets based on the properties of the constituent single-component powders. The validity of the model has been verified with experimental results for ground binary mixtures. It has demonstrated that this model can well predict the tensile strength of ground binary mixtures based upon the properties of single-component powders, such as true density, and the compositions. When the tensile strength of the mixture of microcrystalline cellulose hydroxypropylmethyl cellulose (90:10) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 45.3 to 5.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$. When the tensile strength of the mixture of microcrystalline cellulose starch (80:20) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 31.0 to 11.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$.

• Clean Technology
• /
• v.12 no.4
• /
• pp.205-210
• /
• 2006

In this study, polystyrene hollow microspheres were prepared via optimized purifying steps for the reuse of waste polystyrene. PS/PVA double layered hollow microspheres were prepared using the multiple emulsion ($W_1/O/W_2$) method with recycled polystyrene. The sonication treatment at the first stage of $W_1/O$ emulsion formation was very important factor of control of particle size and its distribution. When sonication was treated for 20 seconds, the average particle size and distribution were $1.35{\mu}m$ and $0.8{\mu}m{\sim}2.8{\mu}m$, respectively. The double layered hollow microspheres that have smaller and uniformed particle size distribution were manufactured when gelatin or Tween 80 was used as surfactants in the $W_2$ phase.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.5
• /
• pp.631-640
• /
• 2014

In this study, manufactured a cream soup by varying addition of Hericium erinaceus and decided its recipe, and conducted particle size analysis, calorimetry, sensory test for investigating physicochemical characteristics and quality characteristics (salinity, sugar content, color value, pH, viscosity), antioxidant activities of soup, and mechanical sensory test for objectivity. This study found that moisture content in Hericium erinaceus powder was 6.16%, crude protein 26.87%, crude fat 4.62% and crude ash was 10.75% respectively. No significant differences were found in salinity, sugar content, pH according to addition of Hericium erinaceus. As for color value of cream soup manufactured by adding Hericium erinaceus, L value decreased with increase in addition of Hericium erinaceus, whereas a value and b value increased. The more the addition of Hericium erinaceus, the higher the viscosity, which increases concentration of soup. As result of analysis on antioxidant activities of Hericium erinaceus cream soup, antioxidant activities increased with increase in addition of Hericium erinaceus. Particle size analysis showed results similar to that of viscometry, which means that the smaller the particle size, the higher the viscosity, whereas viscosity lowered vice versa. Calorie of cream soup showed no significant difference notwithstanding the amount of addition. As a result of sensory test, S5 with 5% of Hericium erinaceus powder was highest rated in color, flavor, taste, umami taste and overall preference. As a result of mechanical sensory test, umami taste increased with increase in addition of Hericium erinaceus powder, whereas bitterness taste lowered significantly (p<0.05) with addition of Hericium erinaceus. As for salty taste, both control group and experimental group that added Hericium erinaceus powder showed no significant difference. Accordingly, experimental group with 5% of Hericium erinaceus powder was proved to be the most desirable.

• Particle and aerosol research
• /
• v.8 no.2
• /
• pp.83-88
• /
• 2012

The electrical wire explosion process in liquid media is promising for nano-sized metal and/or alloy particles. The hybrid Pt/Fe-Cr-Al and Pt/Ni-Cr-Fe nanoparticles for exhaust emission control system are synthesized by electrical wire explosion process in liquid media. The alloy powders have spherical shape and nanometer size. According to the wire component, while Pt/Fe-Cr-Al nanoparticles are shown the well dispersed Pt on the Fe-Cr-Al core particle, Pt/Ni-Cr-Fe nanoparticles are shown the partially separated Pt on the Ni-Cr-Fe core particle. Morphologies and component of two kinds of hybrid nano catalyst particles were characterized by transmission electron microscope and energy dispersive X-ray spectroscopy analysis.

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.17-23
• /
• 2002

In this work we report methods of formation of three-dimensional structures of particles in a liquid crystal host. We found that, under the appropriate conditions, the particles are captured and dragged by the moving isotropic/nematic front during the phase transition process. This movement of the particles can be enhanced significantly or suppressed drastically with the influence of an electric field and/or with changing the conditions of the phase transition, such as the rate of cooling. As a result, a wide variety of particle structures can be obtained ranging from a fine-grained cellular structure to stripes of varying periods to a course-grained "root" structures. Changing the properties of the materials, such as the size and density of the particles and the surface anchoring of the liquid crystal at the particle surface, can also be used to control the morphology of the three-dimensional particle network and adjust the physical properties of the resulting dispersions. These particle structures may be used to affect the performance of LCD's much as polymers have been used in the past.

• Journal of Drive and Control
• /
• v.21 no.1
• /
• pp.8-15
• /
• 2024

This thesis investigates the jetting characteristics of an aerosol jet printing (AJP) process as a function of design and operating conditions. The governing equations of the AJP system are derived for experimentation and analysis. To understand the characteristics of the AJP system, it analyzes the jetting characteristics as a function of the flow rate of the carrier gas and the sheath gas, and the variation of the linewidth with the nozzle exit size based on particle tracking. The thesis focuses on computational fluid dynamics (CFD), which is a computer simulation. The particle tracking results obtained by CFD were analyzed using MATLAB. CFD analytical models can be analyzed in environments with different conditions and consider more specific situations than mathematical computational models. The validity of the CFD analysis is shown by comparing the experimental results with the CFD analysis.