• 제목/요약/키워드: particle size and molecular weight

검색결과 99건 처리시간 0.021초

초음파에너지가 도입된 유화중합공정에서 Polystyrene Latex의 분산도 및 입자분포 특성 (Polydispersity and Particle Size Distribution of Polystyrene Latex Prepared by Ultrasound Induced Emulsion Polymerization)

  • 김원일;홍인권
    • Elastomers and Composites
    • /
    • 제33권2호
    • /
    • pp.110-116
    • /
    • 1998
  • A new technology was introduced to the emulsion polymerization. It is the ultrasonic activation method which replaced a chemical initiator and the environmentally benign process. In this study, free radicals were produced by a pulse type ultrasound energy irradiation, then polystyrene latex was polymerized without chemical initiator. With ultrasonic energy density, the degree of polymerization, average molecular weight, and particle size were increased, but the polydispersity index for the molecular weight and the particle size were decreased. The optimum condition of emulsifier concentration and temperature was found to be 1.0 wt.% SDS and $40^{\circ}C$, respectively. As a result, the emulsion polymerization process without chemical initiator was proved to be comparable to common latex properties such as average molecular weight, molecular weight distribution, particle size, etc.

  • PDF

폴리(메틸 메타아크릴레이트) 입자 크기 및 분자량 제어에 따른 의치상 재료로서의 기계적 물성 변화 (Mechanical Properties of Denture Base Resin through Controlling of Particle Size and Molecular Weight of PMMA)

  • 양경모;정동준
    • 폴리머
    • /
    • 제27권5호
    • /
    • pp.493-501
    • /
    • 2003
  • 의치상 레진 (틀니)의 기본 물질로 사용되는 폴리(메틸 메타아크릴레이트) (PMMA) 입자를 폴리(비닐 알코올) (PVAL)을 안정제로 사용하여 현탁중합법으로 중합하였고, PVAL 농도와 교반속도, 공단량체의 도입에 따른 PMMA의 입자 크기 변화 및 분자량의 변화를 관찰하였다. 또한 합성된 PMMA 수지와 메틸 메타아크릴레이트 단량체를 이용하여 고체/액체 비 (P/L ratio)를 2:1 로 하여 병상물을 제조하고, 일정한 가압성형 조건하에서 제작된 시편으로 수지의 입자 크기 및 분자량에 따른 PMMA에 기초한 틀니용 수지의 기계적 물성 변화를 관찰하였다. 그 결과 평균입자 크기가 100 $\mu$m 이하에서는 분자량이 커질수록 기계적 물성이 높게 나타났으며, 그 이상인 영역에서는 분자량에 상관없이 입자 크기가 증가할수록 기계적 물성의 저하 현상이 관찰되었다. 아울러 중합시 교반속도와 PVAL의 농도를 조절하여 크기와 분자량을 조절 가능하였는데, P/L 부피비가 2인 조건에서 제조된 열경화성 틀니용 수지로 이용되는 입자의 평균크기는 100 $\mu$m 정도가 적절하며, 분자량은 3.0${\times}$$10^{5}$ 전후가 적절함을 알 수 있었다.다.

Dispersion Polymerization of Acrylamide in Methanol/Water Media

  • Lee, Ki-Chang;Lee, Seung-Eun;Song, Bong-Keun
    • Macromolecular Research
    • /
    • 제10권3호
    • /
    • pp.140-144
    • /
    • 2002
  • Dispersion polymerization of acrylamide was carried out in the media of methyl alcohol/$H_2O$ mixtures using hydroxypropyl cellulose and ammonium persulfate as steric stabilizer and initiator, respectively. The effects of concentrations of initiator and steric stabilizer, amount of monomer, polymerization temperature, methyl alcohol/$H_2O$ ratio, and purification of monomer and nitrogen purge on the particle size of the latices and molecular weight of the polymers were investigated. The average particle diameter increased with increasing concentration of initiator, water content in methyl alcohol/$H_2O$ media, and polymerization temperature, but decreased with monomer and stabilizer concentrations. The viscosity average molecular weight increased with increasing concentrations of monomer, steric stabilizer, and water content in dispersion media, but decreased with initiator concentration and polymerization temperature. The PAM polymers prepared with the purified monomer and the nitrogen purging before the reaction showed the highest molecular weight.

Poly-DADMAC과 PSS의 분자량을 달리한 중질탄산칼슘의 개질과 종이 물성에 미치는 영향 (Modification of GCC with Poly-DADMAC and PSS with Different Molecular Weights and its Effect on the Paper Properties)

  • 안정언;이제곤;이혜윤;윤혜정;이학래
    • 펄프종이기술
    • /
    • 제44권5호
    • /
    • pp.21-31
    • /
    • 2012
  • In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.

초 고농도 Ag 나노 졸의 입자크기 제어가 잉크 점성거동에 미치는 영향 (The Effect of Particle Size on Rheological Properties of Highly Concentrated Ag Nanosol)

  • 송해천;남산;이병석;최영민;류병환
    • 한국세라믹학회지
    • /
    • 제46권1호
    • /
    • pp.41-46
    • /
    • 2009
  • The rheological properties of highly concentrated Ag nano sol depending on particle size were studied. The Ag nano sol was prepared by reducing the Ag ion in aqueous solution. The size of Ag nano particle was controlled by two steps of nucleation and growth, and the thickness of adsorption layer was varied by molecular weight of polyelectrolytes. The polyelectrolytes acted as not only ionic complex agent in ionic state and but also dispersant after formation of Ag nano sol. The effective volume was controlled by combination of varying the molecular weight of polyelectrolytes and the size Ag nano sol. The particle size and the viscosity of nano sol were characterized by particle size analyzer, HR-TEM and cone & plate viscometer. It was found that the 10 nm and 40 nm-sized Ag nano sols were prepared by controlling the nucleation and growth steps, respectively. Finally, we could prepare highly concentrated Ag nano sol over 50 wt%.

활성탄 입자크기가 응집 및 흡착에 미치는 영향 (Effect on Particle Size of Activated Carbons for Coagulation and Adsorption)

  • 김영일;배병욱
    • 상하수도학회지
    • /
    • 제20권5호
    • /
    • pp.719-726
    • /
    • 2006
  • Adsorption isotherms and kinetics for taste and odor (T&O) compounds and natural organic matters (NOMs) were performed to evaluate the impacts of activated carbon particle size on coagulation and adsorption. Adsorption capacities for iodine, T&O compounds, and NOM of all the activated carbons under #325 mesh were more excellent than those of virgin activated carbons. Small activated carbon particles were more rapidly adsorbed low molecular weight T&O compounds in the water, while those were slowly adsorbed high molecular weight NOM. When the activated carbon and alum were added simultaneously, the adsorption capacity for organics was better than alum was added alone.

용매 함량이 내충격성 폴리스티렌의 형태구조 및 고무 입도분포에 미치는 영향 (Effect of Solvent Content on Morphology and Rubber Particle Size Distribution of High Impact Polystyrene)

  • 정한균;박정신;장대석;이성재
    • 폴리머
    • /
    • 제26권3호
    • /
    • pp.307-315
    • /
    • 2002
  • 폴리스티렌의 취약한 성질을 개선한 내충격정 폴리스티렌 (HIPS)의 내충격성에 영향을 주는 요소는 분산된 고무상 입자의 크기 및 입도분포, 분자량, 형태구조, 그래프트율 등이다. 이에 따라 HIPS의 물성은 영향을 받으므로 이를 조절하거나 파악하는 것은 중요하다. 본 연구에서는 HIPS의 벌크-용액중합에서 용매함량이 고무입자의 형태구조 및 입도분포, 최종 물성에 미치는 영향에 대하여 고찰하였다. 먼저 중합 진행에 따른 분산상의 입도분포를 측정함으로써 상역전 현상의 변화 추이를 파악하여 전중합 시간을 결정하였다. 중합시 분산용매는 적절한 양에 도달하기 전까지는 고무입자의 크기가 증가하였으며, 그 후에는 점차적으로 감소하였다. 고무상의 형태구조는 분산용매가 증가함에 따라서 그래프트율이 증가하는 형태구조로 바뀌는 것으로 사료된다. 분산용매가 첨가됨에 따라 유변물성 및 인장물성이 취약해졌는데, 이는 분산용매에 의한 사슬이동반응이 매트릭스상인 폴리스티렌의 분자량을 감소시킨 점과 잔류 용매의 존재 때문이었다. 하지만 내충격성은 분산입자의 크기가 증가한 경우 향상되는 경향을 보였다.

현탁중합의 계면안정에 따른 폴리스티렌 입자 제조 (Preparation of Polystyrene particles based on interfacial stability of suspension polymerization)

  • 이진호;이상남;박문수;김은경;문명준
    • 한국인쇄학회지
    • /
    • 제20권1호
    • /
    • pp.65-78
    • /
    • 2002
  • The suspension polymerization of styrene was carried out to obtain the narrow-size distribution of particle by using poly(vinyl alcohol) (PVA) as suspension stabilizer according to the degree of hydrolysis and the molecular weight. The stabilizing properties of suspension are also dependent on the interfacial tension of aqueous solution when PVA is added. When the polymerization process was carried out with low hydrolyzed PVA, it gave single, well-defined particles, while high hydrolyzed PVA gave clusters. The size of particle produced in this study ranged between 5${\mu}{\textrm}{m}$ and 10${\mu}{\textrm}{m}$. The suspending agent, PVA, influences on the drop size and drop stability, When the molecular weight of PVA is increased, the drop size decreases and the drops become more stable toward coalescence. An increase in the PVA concentration decreases the mean drop size and narrows the drop size distribution.

  • PDF

무유화중합에 의한 단분산 Submicron 크기의 고분자 미립자의 제조 (Preparation of Monodisperse Submicron-Sized Polymeric Particles by Emulsifier-Free Emulsion Polymerization)

  • 이기창
    • 접착 및 계면
    • /
    • 제13권3호
    • /
    • pp.101-108
    • /
    • 2012
  • 음이온개시제인 $K_2S_2O_8$ (KPS)와 양이온개시제인 2,2' azobis(2-methyl-propionamidine) dihydrochloride (AIBA)를 이용하여 MMA와 BMA 단량체간의 무유화공중합을 성공적으로 수행하여 PSD가 1.002~1.008인 단분산성이 우수한 poly(BMA-co-MMA)와 PBMA 라텍스들을 제조하였다. 실험결과, 160~494 nm 범위의 수평균입자경과 (1.25~7.55) ${\times}10^4$ 범위의 수평균분자량을 나타내었다. MMA/BMA 유화중합에 따르는 중합속도와 단량체 및 개시제 농도, DVB/EGDMA 가교제 농도, 중합온도 변화에 따르는 수평균입자경과 수평균분자량의 영향을 조사하였다. MMA/BMA 단량체 중 MMA 농도가 증가함에 따라 중합속도가 증가하였으며 일반적으로 이들 라텍스의 평균입자경과 평균분자량은 MMA/BMA 단량체중량비, 단량체량, 개시제량, 중합온도에 따라 쉽게 조절됨을 발견하였다.

GMA-Functionalized Reactive Stabilizer for Polymerization of Methyl Methacrylate in Supercritical $CO_2$: Effect of Stabilizer, Initiator and Monomer Concentrations

  • Han, Sang-Hun;Park, Kyung-Kyu;Lee, Sang-Ho
    • Macromolecular Research
    • /
    • 제16권2호
    • /
    • pp.120-127
    • /
    • 2008
  • Glycidyl methacrylate linked poly(dimethylsiloxane) (GMA-PDMS) was synthesized and used as a stabilizer for the dispersion polymerization of methyl methacrylate (MMA) in supercritical $CO_2$. This study examined the effect of the concentrations of the stabilizer, 2,2'-azobisisobutyronitrile (AIBN) initiator, and MMA on the yield, molecular weight, and morphology of the poly(methyl methacrylate) (PMMA) product. PMMA was obtained in 94,6% yield using only 0,87 wt% GMA-PDMS, When the AIBN concentration was increased from 025 to 1.06 wt%, the molecular weight and particle size of the PMMA decreased from 56,600 to 21,600 and from 4.1 to $2.7{\mu}m$, whereas the particle size distribution increased from 1.3 to 1.9. The $M_n$ of the PMMA product ranged from 41,600 and 55,800 under typical polymerization conditions. The PMMA particle diameter ranged from 1.8 to $11.0{\mu}m$ and the particle size distribution ranged from 1.4 to 1.8.