• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.747-753
• /
• 2004

In this paper, nanocrystalline indium tin oxide (ITO) particles were fabricated by using synthesis without harmful elements. The synthetic method is to eliminate the chloridic and nitridic elements which are included in the current wet type synthetic method. Therefore, it is possible to lower synthetic temperature below 600 $^{\circ}C$ to eliminate the harmful elements. Accordingly, fine particle can be achieved by applying the process. Particle size, surface area, crystal structure, and composition ratio of the synthesized nanocrystalline ITO particle by using the method were analyzed with high resolution transmission electron microscopy (HRTEM), BET surface area analyzer, X-ray diffraction (XRD), and energy dispersion spectroscopy (EDS). As a result, its particle size is less than 10 nm, and the surface area exceeds 100 m$^2$/g. The XRD analysis indicates that the cystal structure of the powder is cubic one with orientation of <222>, <400>, <440>. Also, the analysis of the composition demonstrates that the around 8 wt% tin is uniformly included in In$_2$O$_3$ lattice of the nanoparticle.

• Elastomers and Composites
• /
• 제37권1호
• /
• pp.21-30
• /
• 2002

개시제 ammonium persulfate(APS)와 유화제 sodium dodecyl benzene sulfonate(SDBS)를 이용하여 methyl methacrylate(MMA), styrene(St), ethyl acrylate(EA)등의 단량체를 core(내부)와 shell(외부)의 폴리머성분이 다른 core-shell 폴리머를 합성하고 각 core-shell 폴리머에 대한 구조를 연구하였다. 한 입자의 내부와 외부의 고분자 조성이 다른 composite 라텍스는 고분자 블렌딩과 공중합의 물성과는 달리 한 입자 내에서도 상반된 두 가지 물성을 동시에 나타내는 특성으로 인하여 여러 산업 분야에 응용이 가능하다. 그러나, core-shell 라텍스를 제조할 때 반응중입자가 성장하는 과정에서 입자의 응집과 중합율이 떨어지고, 라텍스의 응용시 기계적 안정성이 문제점으로 되고 있다. 따라서 shell 중합시에 새로운 입자의 생성이 적고 중합중 안정성이 우수한 라텍스를 제조하기 위해 유화제농도, 개시제농도, 중합온도가 PMMA/PSt과 PSt/PMMA의 core-shell 구조에 미치는 영향과 중합 후 입도분석기(particle size analyzer; PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계(differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 최저성막온도(minimum film formation temperature; MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 새로운 특성을 확인하였다.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.495-502
• /
• 2012

본 연구에서는 $TiO_2$ 입자를 얻을 수 있는 침전법을 이용하여 $TiO_2$ 입자를 제조하였다. $TiO_2$ 입자 제조시 사용되는 알콜 용매의 종류와 온도 변화 등의 매개변수가 $TiO_2$ 입자의 결정 구조, 입자의 크기 및 형태에 미치는 영향을 조사하였다. $TiO_2$ 입자제조시 용매로 사용한 알콜 종류인 methyl alcohol, iso-propylalcohol, 그리고 tert-butylalcohol를 scanning electron microscope(SEM) 분석한 결과 iso-propylalcohol이 가장 좋은 결과를 가져왔다. 그리고 온도 변화를 열분석법을 사용한 결과 $200^{\circ}C$에서 $500^{\circ}C$까지는 아나타제 구조를 유지하였으나, $800^{\circ}C$에서는 루틸 구조로 전환되었다.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.110-116
• /
• 2005

This paper deals with interaction between two bubbles or particles and flow around them, visualized by a moving object flow image analyzer(MOFIA) consisting of a three-dimensional (3D) moving object image analyzer(MOIA) and two-dimensional particle image velocimetry(PIV). The experiments were carried out for rising bubbles or particles of various densities, sizes, and/or shapes in stagnant water in a vertical pipe. In the MOFIA employed, 3D-MOIA was used to measure particles or bubbles motion and PIV was used to measure fluid flow, The experimental results showed that the interaction was characterized by the shape, size and density of two particles or bubbles.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.294-294
• /
• 2017

Rice (Oryza sativa L.) is one of the main agricultural crops in Asian countries, including Korea, and is considered as the most important staple food in the world. Rice is also processed into flour, which is consumed through various foods such as cake, noodle, bread, and confectionary. Rice flour quality is highly dependent on variety and milling conditions. Producing rice flour with fine particles is more difficult than wheat flour because of its grain hardness. The Korean rice varieties representing different amylose contents were selected for this study. The relationship between the morphological and starch characteristics of rice kernels and the appropriate varieties for producing good-quality, dry-milled rice flour were examined. The hardness of the rice kernels was determined by measuring the pressure at the grain breakage point. The damaged starch content of the rice flour was determined using a Megazyme starch damage assay kit. The particle-size distribution of the rice flour was measured as the volume-base distribution using a laser-diffraction particle size analyzer. The mean particle-size distribution of the dry-milled flour obtained was between $65.3{\sim}105.1{\mu}m$ among the rice varieties. The opaque, non-glutinous, Seolgaeng rice demonstrated a narrow peak at the fine size, whereas the entire particle-distribution range for other varieties was wide. Seolgaeng exhibited significantly lower damaged starch content of dry-milled flour than the other varieties (p < 0.05). Seolgaeng showed lowest in energy consumption on rice flour production with 200 mesh particle size. Accordingly, it is possible to produce dry-milled rice flour which is similar to wheat flour that would considerably reduce milling costs.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.701-706
• /
• 2008

이송식 아크 열플라즈마를 이용하여 벌크상태의 니켈을 증발시킨 후 급속한 냉각과정을 거쳐 니켈 나노입자를 합성하였다. 플라즈마에 의해 질소가 용이하게 해리되어 용융된 니켈속으로 용해되고 과포화된 질소원자는 질소 분자로 가스화반응을 하여 반응열을 발산하는데 그 반응열에 의해 다량의 니켈증기가 생성된다. 생성된 니켈증기는 희석가스와 냉각가스를 이용하여 나노 입자 크기의 니켈분말로 제조된다. 희석가스 유량이 증가할수록 입자크기는 감소하였으며 그 분포경향이 작은 크기에서 좁게 나타났다. 평균입자크기는 희석가스 유량이 250 l/min에서 202 nm로 분석되었으며 모든 입자는 250 nm 이하 크기에서 존재함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.403-411
• /
• 2012

This study presents the nano-sized particle emission characteristics from a small turbocharged common rail diesel engine applicable to prime and auxiliary machines on marine vessels. The experiments were conducted under dynamic engine operating conditions, such as steady-state, cold start, and transient conditions. The particle number and size distributions were analyzed with a high resolution PM analyzer. The diesel oxidation catalyst (DOC) had an insignificant effect on the reduction in particle number, but particle number emissions were drastically reduced by 3 to 4 orders of magnitude downstream of the diesel particulate filter (DPF) at various steady conditions. Under high speed and load conditions, the particle filtering efficiency was decreased by the partial combustion of trapped particles inside the DPF because of the high exhaust temperature caused by the increased particle number concentration. Retarded fuel injection timing and higher EGR rates led to increased particle number emissions. As the temperature inside the DPF increased from $25^{\circ}C$ to $300^{\circ}C$, the peak particle number level was reduced by 70% compared to cold start conditions. High levels of nucleation mode particle generation were found in the deceleration phases during the transient tests.

• 한국입자에어로졸학회지
• /
• 제9권1호
• /
• pp.23-29
• /
• 2013

Inertial impaction type mist eliminators are the most effective instruments to separate mist from the gas. In this work, the effect of the horizontal chevron type mist eliminators is characterized experimentally. Droplet size distribution and evaluation of removal efficiency of the chevron type mist eliminators at different gas flows were investigated using an aerosol particle size analyzer and a portable aerosol spectrometer, respectively. The experimental investigations showed that the mist removal efficiency in these instruments is dependent in the droplet size, and the pressure drop is nil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.44-45
• /
• 2005

Both $Al_2O_3$ and $SiO_2$ nanopowders were ball-milled to break large agglomerates$(500nm\sim10{\mu}m$). To improve the dispersion of ball-milled nanoparticles in transformer oil, surface modification was performed with oleic acid(OA). The modified nanoparticles were examined by the particle size analyzer, electron microscope, Infrared spectroscopy and stability analyser. Particle Size distributions were measured for ball-milled particles, and the results were compared with the size distribution of primary particles. FTIR results indicated that hydrophobicity of modified nanoparticles was due to the chemical reaction between hydroxyl groups of particle surface and oleic acid. The dispersion stability of surface-modified nanoparticles was quite good in transformer oil.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.760-768
• /
• 2000

Filter efficiency of electrically charged particle in uncharged fibrous filter was measured. In previous studies, the effect of charged particle on filter efficiency was investigated but there was difficulty in measuring of image effect that is appeared at the charged small particle. We could easily measure the image effect with charging small particles by photoelectric charging. The spark discharge aerosol generator and a differential mobility analyzer (DMA) were used to generate sub-micron monodisperse particles (${\leq}200$ nm). The generated particles were charged in photoelectric charging process using ultraviolet lamp and electric field. The filter efficiency of the charged particles, classified by another DMA, was measured in filter tester using a condensation nucleus counter (CNC) as function of particle diameter, particle charge and airflow velocity. It is shown that the filter efficiency increases with increasing charge number of the particle and is affected by particle size and flow velocity. Single fiber filter efficiency mainly depends on image force parameter and peclet number. The peclet number was not considered at previous other papers. We propose a modi fied experimental correlation as function of image force parameter and peclet number.