• 비파괴검사학회지
• /
• 제16권3호
• /
• pp.162-173
• /
• 1996

본 연구는 강편 빌레트의 표면 결함을 검출하기 위한 건식 자분 탐상에 관한 것으로 자분 탐상능을 대상체에 흘리는 자화 전류, 대상체의 온도, 자분의 총 분사량 등에 대하여 평가하였다. 선재 제품의 등급에 따라 필요로 하는 몇 가지 강종을 선택하여 강종별 자기적 특성을 평가하였으며, 이를 입력 자료로 하여 유한 요소법에 의한 자기 해석을 행하였고, 그 결과를 직류 자화 전류에 의한 누설 자속 측정 결과와 비교 분석하였다. 교류 자화 전류에 의한 건식 자분 탐상능을 직류 자화 전류에 의한 탐상능과 비교하여 강종 및 자화 전류의 유형에 따른 자화 전류치를 결정하였다. 직류 자화 전류에 의한 자분 탐상 결과를 유한 요소법에 의한 계산과 비교하였고, 빌레트의 표면과 표면 결함 부위에서 측정한 누설 자속으로 비교 결과를 평가하였다. 각 강편재의 경우 직류 자화 전류에 의한 표면 자장은 그 형상에 의한 영향으로 코너 부위에서는 면 중앙의 표면 자장치에 비해 30% 정도였으며, 교류 자화 전류에 의해서는 그 비율이 70% 정도였다. 교류 자화 전류는 코너로부터 면중앙으로 10mm 되는 영역을 제외하고는 전 면에서 균일한 표면 자장을 발생하였다. 대상체의 온도에 따른 자분의 흡착은 대상체의 온도 $150^{\circ}C$ 까지는 큰 변화가 없으나 자분의 고착에 있어서 $60^{\circ}C$ 이상의 고온재에 대해서는 융착 용매로 메틸렌 크로라이드를 사용하는 것이 부적합하였다. 자분의 총분사량은 자분 탐상능에 상당히 큰 영향을 미침을 확인하였고 이에 대한 정량적 평가를 행하였다.

• 한국자기학회지
• /
• 제6권5호
• /
• pp.334-339
• /
• 1996

도포형 자기기록매체에 있어서 자성분의 size와 특성이 자기기록 특성에 미치는 영향을 조사하기위하여 size가 다른 각각의 자성분으로 만든 도료를 이용하여 자기 tape를 제조하고 자성분의 분산성 및 전자 변환 특성을 측정하였다. 자성분의 분산성은 입자 size의 영향보다 입자의 형태 및 자성분의 표면화학특성에 크게 의존하며 자성분의 입자 size가 작아질 수록 자성분의 충진성은 향상 되고 tape의 remanence 특성과 출력 특성 및 noise 특성이 향상되어 고출력, 저 noise의 넓은 dynamic range의 출력이 나타남을 확인하였다. 따라서 고출력의 자기 tape를 제조하기 위하여는 자성분의 size, 형상, 표면화학 특성 및 자기특성이 자성분 선정의 중요한 요건임을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.161-165
• /
• 2004

In the vortex particle method based on the vorticity-velocity formulation for solving the Wavier-Stokes equations, the unsteady, incompressible, viscous laminar flow over a NACA 0012 foil is simulated. By applying an operator-splitting method, the 'convection' and 'diffusion' equations are solved sequentially at each time step. The convection equation is solved using the vortex particle method, and the diffusion equation using the particle strength exchange(PSE) scheme which is modified to avoid a spurious vorticity flux. The scheme is improved for variety body shape using one image layer scheme. For a validation of the present method, we illustrate the early development of the viscous flow about an impulsively started NACA 0012 foil for Reynolds number 550.

• 천문학회지
• /
• 제48권1호
• /
• pp.9-20
• /
• 2015

We study the evolution of the energy spectrum of cosmic-ray electrons accelerated at spherically expanding shocks with low Mach numbers and the ensuing spectral signatures imprinted in radio synchrotron emission. Time-dependent simulations of diffusive shock acceleration (DSA) of electrons in the test-particle limit have been performed for spherical shocks with parameters relevant for typical shocks in the intracluster medium. The electron and radiation spectra at the shock location can be described properly by the test-particle DSA predictions with instantaneous shock parameters. However, the volume integrated spectra of both electrons and radiation deviate significantly from the test-particle power-laws, because the shock compression ratio and the flux of injected electrons at the shock gradually decrease as the shock slows down in time. So one needs to be cautious about interpreting observed radio spectra of evolving shocks based on simple DSA models in the test-particle regime.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.89-98
• /
• 2004

In this paper, we develope a dispersion model based on the Generalized Langevin Model. Thomson's well-mixed condition is the well known criterion to determine particle dispersion. But, it has 'non-uniqueness problem'. To resolve this, we adopt a turbulent model which is a new approach in this field of study. Our model was greatly simplified under the self-similarity condition, leaving model only two model constants $C_{0}$ and ${\gamma}$$_{5}$ that control the dispersion and spin which measures rotational property of the Lagrangian particle trajectory. We investigated the sign of spin as well as magnitude by using the Direct Numerical Simulation. Model calculations were performed on the neutrally stable boundary layer flow. We found that spin has weak effect on the particle dispersion but it shows the significant effect on the horizontal flux compared to the zero-spin model.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.775-780
• /
• 2005

This study was performed to investigate the effect of foulant characteristics on Membrane fouling index such as Silt Density Index (SDI) and Modified Fouling Index (MFI). A linear relationship was found relating the fouling index (both SDI and MFI) on particle concentration, but fouling index values were nonlinearly (exponentially) with increasing organic concentration. When organic matter was the primary cause of fouling, the MFI was not accurately predicted due to internal fouling such as pore adsorption. The fouling index was determined mainly by particle characteristics when both particle and organic coexisted in the feed water. This observation was attributed to lessening of organic pore adsorption by particle cake layer formed on the membrane surface. Bench-scale actual fouling experiments demonstrated that permeate flux declines much faster with feed water containing particles than organic matters although fouling potential predicted by SDI values were identical, indicating that the accurate prediction of fouling potential requires the development of fouling index reflecting different foulant characteristics.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.193-202
• /
• 1994

A study of heat transfer and particle deposition has been made numerically for outside vapor deposition process. Heat conduction through the two layer cylinder which consists of the target and the deposited layer is included together with heat transfer and gas jet flow onto the cylinder from the torch. Temperature and flow fields have been obtained by an iterative method and thermophoretic particle deposition has been studied. Of particlar interests are effects of the thickness of the deposited layer, the torch speed and the rotation speed of the cylinder on particle deposition flux and efficiency. Effects of buoyancy, variable properties and tube rotation are included.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.15-18
• /
• 2004

Computational fluid dynamics (CFD) was applied to modeling particle dynamics in microfiltration (MF). The rejection properties of poly methylmethacrylate (PMMA) and polystyrene (PS) were calculated. Calculated rejection (R) of PMMA was independent with the porosity of the membrane, and the R was constant in the range of volume flux between $1\times 1-^{-4}-1\times 10^{-2}$ m/s. These observations were in quantity agreement with our experimental observations. The dependence of PMMA and PS rejection on the ratio of particle diameter and pore diameter were good agreement with the experimental values, which suggesting that the validity of CFD simulation to evaluate rejection of particle in MF membranes. Change of rejection of PMMA as a function of time was molded based on the CFD result which explained well the experimental observation.

• 환경영향평가
• /
• 제8권2호
• /
• pp.31-44
• /
• 1999

Atmospheric dry deposition flux and ambient particle mass size distribution were measured to evaluate the impact of atmospheric deposition around the Nanjido landfill sites. Wind direction affects greatly on the variation of mass flux and mass size distribution and made two times higher when the wind was blown from the road side. The effect of Nanjido landfill on the mass size distribution was significant comparing to simultaneously measured mass size distribution at the other sampling site. The results showed that the particle diameter bigger than $10{\mu}m$ explained the majority of atmospheric dry deposition flux. A survey was also carried out to investigate the contamination of soils in a completed Nanjido landfill. The chemical properties of the soil analyzed in the present study include pH, oxidation-reduction potential (ORP), anion and cation concentration, total organic carbon(TOC), and some-metal elements concentrations were analyzed. Microbial activity in the soils was also evaluated by measuring dehydrogenase activities. TOC in the soil contaminated with leachate was $467.0{\mu}g/g-dry$ soil, and the TOC in the soil, where Nanjido landfill gases were emitted from, was $675{\mu}g/g-dry$ soil. The highest microbial activity of $968.0{\sim}2147{\mu}g-TPF/g-dry$ soil day was found in the soil spouting Nanjido landfill gases. Compared with those in the uncontaminated soil, the concentrations of Cr, Cu and Ph in the contaminated soil were higher.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.294-305
• /
• 2012

The objective of this study is to estimate the chemical compositions and to identify qualitative sources of fall-out particles in study area. Also, this study used a spatial analysis to estimate spatial distributions and average deposition flux. In this study, the chemical compositions of fall-out particle samples collected at Muncheon lake from May 2010 to January 2011 were analyzed by ICP and IC. The monthly trend of deposition fluxes for fall-out particles showed highest in June ($107.61kg/km^2/day$) and lowest in October ($22.22kg/km^2/day$). The average fluxes of Fe, Si, Al, Zn and Ba are 0.44, 0.24, 0.20, 0.17, $0.09kg/km^2/day$, respectively. Also, the average fluxes of $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, and $Na^+$ are 6.48, 5.01, 4.96, 1.75, $1.37kg/km^2/day$, respectively. A Factor analysis identified four sources such as 1) nonferrous metal, motor vehicle, and agriculture, 2) soil, 3) field burning, incineration, and 4) road dust and oil burning. The IDW (inverse distance weighting) spatial analysis method was used to estimate spatial distribution and average deposition flux for fall-out particles. A total average deposition fluxes estimated in Muncheon lake were 936.15 kg/month. The spatial distribution trend of deposition flux showed higher at site 1 and 2 than at site 3, 4 because local road is adjacent to the site 1 and 2.