• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.607-614
• /
• 1996

Yttrium(Y) coating was incorporated by ion-plating method either directly on the TiAl substrate or after pack aluminizing on TiAl to improve the oxidation resistance of TiAl alloy. After Y-coating, heat treatment at low oxygen partial pressure was carried out. Performance of various coating was evaluated by isothermal and cyclic oxidation tests. A simple Y-coating without pack aluminizing can give a detrimental effect on the. oxidation resistance of TiAl alloy, because it enhances formation of $TiO_2$. On the other hand, a composite coating of aluminide-yttrium has shown excellent oxidation resistance. A continuous protective $Al_2O_3$ scale is formed on the aluminized TiAl, and Y-coating improves $Al_2O_3$ scale adherence and substantially prevents depletion of Al in the aluminide-coating layer.

• Corrosion Science and Technology
• /
• v.5 no.5
• /
• pp.153-159
• /
• 2006

Austenitic stainless steels with addition of various amounts of Mo and W were evaluated in terms of corrosion and contact resistance to determine optimum alloy composition of metallic bipolar plate for PEMFC. The corrosion property was evaluated by both acid fume exposure test at $130^{\circ}C$ and by electrochemical polarization tests in $H_3PO_4$ solution at $80^{\circ}C$. Austenitic stainless steel with proper amount of Mo and W demonstrated not only good corrosion resistance but also low contact resistance. Analyses on the passive film show that partial substitution of Mo by W enhances passive film stability and repassivation property. Test results suggest that austenitic stainless steel with 2 wt%Mo and 4 wt%W has optimum composition for metallic bipolar plate used in PEMFC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.704-713
• /
• 2003

The effect of partial substitution of tungsten for molybdenum on the microstructure and corrosion resistance in 22Cr-5Ni-3Mo duplex stainless steel(DSS) aging heat treated in a temperature range of 600~$1000^{\circ}C$ has been investigated. Electrochemical tests were carried out for the evaluation of corrosion resistance. Aging treatment had hardly influenced the general corrosion resistance. With the increase of aging time, the pitting corrosion resistance of the DSS had decreased, After aging for 2min at 700~$900^{\circ}C$, the pitting potential of the 3Mo steel decreased remarkably, while that of the W-substituted steel hardly changed. During aging. the intermetallic $\sigma$ and secondary austenite ($\gamma_2$) phases were precipitated. and the pitting corrosion and intergranular corrosion resistance were significantly decreased after aging at 700~$750^{\circ}C$ for 10 h, which could be caused by the $\gamma_2$ formation. The ${\gamma}$$_2$ phase could affect the depletion of molybdenum and chromium in the $\gamma_2/\alpha and \gamma_2/\sigma$ boundaries.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.91-96
• /
• 2016

Oxidation behaviours of ash free coal (AFC), carbon, and H₂ fuels were investigated with a coin type molten carbonate fuel cell. Because AFC has no electrical conductivity, its oxidation occurs via gasification to H₂ and CO. An interesting behaviour of mass transfer resistance reduction at higher current density was observed. Since the anode reaction has the positive reaction order of H₂, CO₂ and H₂O, the lack of CO₂ and H₂O from AFC results in a significant mass transfer resistance. However, the anode products of CO₂ and H₂O at higher current densities raise their partial pressure and mitigate the resistance. The addition of CO₂ to AFC reduced the resistance sufficiently, thus the resistance reduction at higher current densities did not appear. Electrochemical impedance results also indicate that the addition of CO₂ reduces mass transfer resistance. Carbon and H₂ fuels without CO₂ and H₂O also show similar behaviour to AFC: mass transfer resistance is diminished by raising current density and adding CO₂.

• Advances in concrete construction
• /
• v.8 no.2
• /
• pp.127-137
• /
• 2019

Roller Compacted Concrete (RCC) is a zero slump concrete consisting of a mixture of cementitious materials, sand, dense graded aggregates and water. In this study, an attempt has been made to investigate the effect of aggregate type on strength and abrasion resistance of RCC made by using granulated blast furnace slag (GGBS) as partial replacement of cement. Mix proportions of RCC were finalized based upon the optimum water content achieved in compaction test. Two different series of RCC mixes were prepared with two different aggregates: crushed gravel and limestone aggregates. In both series, cement was partially replaced with GGBS at a replacement level of 20%, 40% and 60%. Strength Properties and abrasion resistance of the resultant mixes was investigated. Abrasion resistance becomes an essential parameter for understanding the acceptability of RCC for rigid pavements. Experimental results show that limestone aggregates, with optimum percentage of GGBS, perform better in compressive strength and abrasion resistance as compared to the use of crushed gravel aggregates. Observed results are further supported by stoichiometric analysis of the mixes by using basic stoichiometric equations for hydration of major cement compounds.

• Knowledge Management Research
• /
• v.23 no.2
• /
• pp.143-168
• /
• 2022

Using Herzberg's motive hygiene theory, this study also investigated the influence of motivation factors and hygiene factors on acceptance and resistance of mobile facial recognition payment services, and the influence of consumer innovation as a parameter on acceptance and resistance from motivation factors and hygiene factors. A survey was conducted on Chinese users who had experience using mobile payment services. IBM SPSS Statistics 26 and SmartPLS 3.0 were used for statistical analysis. As a result of the analysis, the motivating factors of mobile facial recognition payment services have a positive (+) impact on acceptance, and there were no significant results on resistance. In addition, hygiene factors have been shown to have negative (-) effects on acceptance and positive (+) effects on resistance. Consumer innovation, which is a parameter in relation to motivation factors and acceptance and resistance, had a partial mediation effect, and a partial mediation effect was also seen in the relationship between hygiene factors and resistance, but no mediation effect was found in the relationship between hygiene factors and acceptance. The motivating factors found through research results such as rapidity, ubiquity, perceived usability, perceived ease of use, privacy concerns, security, status quo inertia, use barriers, and loss avoidance, which are factors of non-contact and hygiene, can be used as basic data for activating mobile facial recognition payment services.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2107-2109
• /
• 1999

The insulation diagnostic tests was performed at local thermal power plants high voltage motor. The insulation diagnostic tests include measurements of insulation resistance, polarization index, AC current, $tan{\delta}$, partial discharges. This paper describes Insulation characteristics for high voltage motor which located by inside and outside.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.42-48
• /
• 2019

In the case of a patient with a small number of unilateral remaining teeth in the mandible, a restoration with conventional removable partial denture cannot provide sufficient retention and resistance. A harmful stress from the poor stability of denture on remaining teeth occurs due to alveolar bone resorption in edentulous area. Although implant fixed prosthesis can provide multiple benefits over conventional removable partial denture, there are limitations come from anatomic structures and costs. In this case, an implant-assisted removable partial denture (IARPD) with a couple of implants placed in strategic positions can be a treatment modality. The objective of this article is to present a case report of two patients showed satisfactory clinical outcomes during three-year follow-up period describing the fabrication and advantages of removable partial denture assisted by teeth and implants (IARPD) for a patient with a small number of unilateral remaining teeth in mandible using Locator as an implant attachment.

• Journal of Korea Trade
• /
• v.27 no.3
• /
• pp.87-102
• /
• 2023

Purpose - Although the importance and necessity of "sustainable supply chain management (SCM)" is emphasized, it is often not realized due to conflicting results, the long time required, and large-scale changes brought about by sustainability. This study used the innovation resistance model to confirm the influence of sustainable SCM innovation resistance factors and dynamic capabilities on adoption intentions. This approach made it possible to understand the factors that hinder adoption of sustainability practices and to identify the relationships among influencing factors. It should also help to establish effective policies or strategies. Design/methodology - Through a literature review, the characteristics of sustainable SCM were classified into relative advantage, compatibility, perceived risk, and complexity. The effects of these innovation characteristics on innovation resistance in sustainable SCM and the effects of innovation resistance on adoption intentions were confirmed. In addition, the effects of SCM capabilities on innovation resistance and adoption intentions were analyzed, and the mediating effect of innovation resistance was analyzed. Findings - Compatibility, perceived risk, and flexibility had significant effects on innovation resistance. In turn, innovation resistance had a significant effect on adoption intention, and flexibility had a significant effect on intention to adopt. A partial mediating effect of resistance to innovation was confirmed. Originality/value - Although many previous studies have acknowledged trade-offs with sustainability, most sustainable SCM studies dealt with the correlations among positive drivers of adoption, practices, and performance. This study confirmed the process of accepting sustainable SCM innovation in a single model and is expected to serve as a cornerstone for future sustainable SCM adoption studies. In addition, our findings should help establish effective policies or strategies to activate SSCM adoption by identifying the factors that hinder the adoption of sustainable SCM.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.188-195
• /
• 2000

This study was conducted to measure the moisture content of powdered food using RF impedance spectroscopic method. In frequency range of 1.0 to 30㎒, the impedance such as reactance and resistance of parallel plate type sample holder filled with wheat flour and red-pepper powder of which moisture content range were 5.93∼-17.07%w.b. and 10.87 ∼ 27.36%w.b., respectively, was characterized using by Q-meter (HP4342). The reactance was a better parameter than the resistance in estimating the moisture density defined as product of moisture content and bulk density which was used to eliminate the effect of bulk density on RF spectral data in this study. Multivariate data analyses such as principal component regression, partial least square regression and multiple linear regression were performed to develop one calibration model having moisture density and reactance spectral data as parameters for determination of moisture content of both wheat flour and red-pepper powder. The best regression model was one by the multiple linear regression model. Its performance for unknown data of powdered food was showed that the bias, standard error of prediction and determination coefficient are 0.179% moisture content, 1.679% moisture content and 0.8849, respectively.