• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.241-249
• /
• 1982

Two dinnerware porcelain bodies involving partial replacement of feldspar and kaoline by about 35wt% domestic GYUNGJU-pottery stone were developed and their properties such as shrinkage, porosity, firing range, linear thermal expansion, pyroplastic deformation, degree of whiteness and mechanical strength were compared with those of a traditional clay-flint-feldspar body. The experimental results showed that one of the clay-flint-feldspar-pottery stone body with 1% ZnO addition had the firing range of 115$0^{\circ}C$~121$0^{\circ}C$, whereas the traditional body had the firing range of 12$25^{\circ}C$~129$0^{\circ}C$. The linear drying shrinkage and linear dry-to-fired shrinkage of all bodies were 2.5~4.5% and 15~18%, respectively. And the major crystalline phases of sintered bodies were $\alpha$-quartz and secondary mullite surrounded by glassy phases. The modulus of rutpture of sintered bodies was ranged from 860 to 870kg/$\textrm{cm}^2$, and the microhardness of sintered bodies was 680 kg/$\textrm{cm}^2$.

• 한국조사연구학회:학술대회논문집
• /
• 한국조사연구학회 2006년도 추계학술대회 발표논문집
• /
• pp.67-83
• /
• 2006

In successive sampling on two occasions the problem of estimating a finite population quantile has been considered. The theory developed aims at providing the optimum estimates by combining (i) three double sampling estimators viz. ratio-type, product-type and regression-type, from the matched portion of the sample and (ii) a simple quantile based on a random sample from the unmatched portion of the sample on the second occasion. The approximate variance formulae of the suggested estimators have been obtained. Optimal matching fraction is discussed. A simulation study is carried out in order to compare the three estimators and direct estimator. It is found that the performance of the regression-type estimator is the best among all the estimators discussed here.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.247-262
• /
• 2014

Partial replacement of Portland cement by slag can reduce the energy consumption and $CO_2$ emission therefore is beneficial to circular economy and sustainable development. Compressive strength is the most important engineering property of concrete. This paper presents a numerical procedure to predict the development of compressive strength of slag blended concrete. This numerical procedure starts with a kinetic hydration model for cement-slag blends by considering the production of calcium hydroxide in cement hydration and its consumption in slag reactions. Reaction degrees of cement slag are obtained as accompanied results from the hydration model. Gel-space ratio of hardening slag blended concrete is determined using reaction degrees of cement and slag, mixing proportions of concrete, and volume stoichiometries of cement hydration and slag reaction. Furthermore, the development of compressive strength is evaluated through Powers' gel-space ratio theory considering the contributions of cement hydration and slag reaction. The proposed model is verified through experimental data on concrete with different water-to-binder ratios and slag substitution ratios.

• Journal of Chest Surgery
• /
• 제28권2호
• /
• pp.188-192
• /
• 1995

A 50 year old man with acute aortic dissection DeBakey type I, involving right coronary artery and aortic valve, underwent replacement of the ascending aorta and aorto-right coronary bypass grafting. The operative findings showed a large transverse intimal tear was at about 4cm above the aortic valve. The dissection extended out into the proximal right coronary artery. And we found that the right coronary artery originated from the left sinus of Valsalva, run transversally in the aortic wall, with partial rupture. Postoperatively he had no ischemic cardiac symptoms and neurologic complications. He was discharged on postoperative 9th day with good result.

• 대한임베디드공학회논문지
• /
• 제9권1호
• /
• pp.25-32
• /
• 2014

In this paper, we proposed a partial-way set associative cache memory with an effective memory access time and low energy consumption. In the proposed set-associative cache memory, it is allowed to access only a 2-ways among 4-way at a time. Choosing ways to be accessed is made dynamically via the least significant two bits of the tag. The chosen 2 ways are sequentially accessed by the way selection bits that indicate the most recently referred way. Therefore, each entry in the way has an additional bit, that is, the way selection bit. In addition, instead of the 4-way LRU or FIFO algorithm, we can utilize a simple 2-way replacement policy. Simulation results show that the energy*delay product can be reduced by about 78%, 14%, 39%, and 15% compared with a 4-way set associative cache, a sequential-way cache, a way-tracking cache, and a way cache respectively.

• Journal of Chest Surgery
• /
• 제12권3호
• /
• pp.183-190
• /
• 1979

A 23-year-old male patient complained dyspnea on exertion and orthopnea since December 1977. On examination, he was tall and slender. There was grade IV/VI to-and-fro murmur on the left sternal border especially on Erb`s point. The liver was descended 2 fingers breadth below right costal margin. There were no signs of Marfan`s syndrome. Echocardiography demonstrated partial closure of aortic valve and dilated aortic root with enlargement of ascending aorta. Left heart cardiac catheterization revealed moderately elevated pulmonary wedge pressure and right ventricular pressure. The left ventricular end diastolic pressure was markedly elevated to 26 mmHg. On aortography, the aortic regurgitation was severe and it was belonged to angiographically Grade IV. The aortic valve was replaced with Carpentier-Edwards valve without excision and replacement of ascending aorta, under the impression of rheumatic valvular heart disease. After closure of aortotomy, blood pressure was transiently elevated and bleeding from the site of inserting air vent needle of ascending aorta was developed. The bleeding was not controlled by any means. On postmortem microscopic study, the histologic changes were strikingly limited to the ascending aorta from the region of the aortic valve ring.

• Journal of the Korean Statistical Society
• /
• 제36권4호
• /
• pp.543-556
• /
• 2007

In successive sampling on two occasions the problem of estimating a finite population quantile has been considered. The theory developed aims at providing the optimum estimates by combining (i) three double sampling estimators viz. ratio-type, product-type and regression-type, from the matched portion of the sample and (ii) a simple quantile based on a random sample from the unmatched portion of the sample on the second occasion. The approximate variance formulae of the suggested estimators have been obtained. Optimal matching fraction is discussed. A simulation study is carried out in order to compare the three estimators and direct estimator. It is found that the performance of the regression-type estimator is the best among all the estimators discussed here.

• Journal of Chest Surgery
• /
• 제26권10호
• /
• pp.749-752
• /
• 1993

The 26 patients were randomly selected among patients who underwent valve replacement from February 1992 through September 1993 at National Medical Center. They were divided into two groups, one control group[n=13], the other aprotinin group[n=13]. The aprotinin group recieved 15000 KIU/kg aprotinin in the CPB priming volume and 35000 KIU/kg aprotinin intravenously during operation. We checked preoperative and postoperative hemoglobin, platelet, prothrombin time, activated partial thromboplastin time, creatinine phosphokinase and lactic dehydrogenase. There was no difference in the patient`s above clinical parameters between both groups. The platelet count in both groups decreaced after operation. These findings demonstrated that the effectiveness of aprotinin was not associated with platelet number but probably associated with a protection of platelet function and a prevention of hyperfibrinolysis. The intraoperative and postoperative blood loss and requirement of blood were significantly reduced in aprotinin group.

• 대한가정학회지
• /
• 제23권3호
• /
• pp.63-73
• /
• 1985

This study was conducted to investigate the effects of fermentation time and the proportion of wheat flour to rice flour on Jeung-Pyun's texture. Textural characteristics were examined through sensory Evaluation and Instron Universal testing machine. The properties examined through sensory evaluation were grain, softness, sourness, chewiness and overall quality. Wigh Instron, hardness, cohesivenessm elasticity, gumminess and chewiness were measured. RESULTS : 1. Sensory evaluation data indicated that Jeung-Pyun containing 25% wheat flour and fermented 2 hrs were obtained higher scores than any other Jeug-Pyuns in the grain, softness and overall quality. 2. pHs of Jeung-pyundough and Jeung-Pyun containing 100% rice flour were lower than pHs of those with wheat flour added. 3. Volume of Jeung-Pyun increased as the proportion of wheat flour to rice flour and the length of fermentation time increased. 4. Instron measurement indicated that the hardness of Jeung-Pyun with 50% wheat flour added and 2hrs fermentation time was higher than of others.

• Preventive Nutrition and Food Science
• /
• 제20권3호
• /
• pp.204-209
• /
• 2015

To develop new type of sponge cake, the effects of partial (0~40%) replacement with Rubus coreanus powder (RCP) on the quality characteristics of sponge cakes were investigated. The pH level and moisture content ranged from 4.05~8.23 and 28.49~36.59, respectively, and significantly decreased upon addition of RCP (P<0.05). Baking loss rate and cake firmness significantly increased with higher RCP content in the formulation, whereas morphological characteristics of cakes such as height, volume, and symmetry indices significantly decreased (P<0.05). For crumb color values, $L^*$-and $b^*$-values significantly decreased while $a^*$-value significantly increased as a result of RCP substitution (P<0.05). Hedonic sensory results indicated that sponge cakes supplemented with 30~40% RCP showed the most favorable acceptance scores for most of the sensory attributes evaluated. Overall, Rubus coreanus sponge cake could be developed with comparable physicochemical qualities without sacrificing consumer acceptability.