• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.397-404
• /
• 2022

Background Excessive use of corticosteroids therapy along with gross immunocompromised conditions in the novel coronavirus disease 2019 (COVID-19) pandemic has raised the risks of contracting opportunistic fungal infections. Here, we describe our experience with the implementation of a surgical protocol to treat and reconstruct rhino-orbital-cerebral mucormycosis. Methods A retrospective review of our prospectively maintained database was conducted on consecutive patients diagnosed with mucormycosis undergoing immediate reconstruction utilizing our "Mucormycosis Management Protocol." All patients included in this study underwent reconstruction after recovering from COVID-19. Wide local excision was performed in all cases removing all suspected and edematous tissue. Reconstruction was done primarily after clear margins were achieved on clinical assessment under a cover of injectable liposomal amphotericin B. Results Fourteen patients were included. The average age was 43.6 years and follow-up was 24.3 days. Thirteen patients had been admitted for inpatient care of COVID-19. Steroid therapy was implemented for 2 weeks in 11 patients and for 3 weeks in 3 patients. Eight patients (57.1%) had a maxillectomy and mucosal lining resection with/without skin excision, and six patients (42.8%) underwent maxillectomy and wide tissue excision (maxillectomy and partial zygomatic resection, orbital exenteration, orbital floor resection, nose debridement, or skull base debridement). Anterolateral thigh (ALT) flaps were used to cover defects in all patients. All flaps survived. No major or minor complications occurred. No recurrence of mucormycosis was noted. Conclusion The approach presented in this study indicates that immediate reconstruction is safe and reliable in cases when appropriate tissue resection is accomplished. Further studies are required to verify the external validity of these findings.

• Archives of Plastic Surgery
• /
• v.50 no.1
• /
• pp.17-25
• /
• 2023

A variety of reduction labiaplasty techniques have been introduced to date, but no single technique will offer the optimal solution for every patient. Rather, the technique should be chosen based on anatomical, configurational, and technical considerations, as well as on patients' personal preferences regarded maintenance of the labial rim, maintenance of labial sensitivity, and prevention of iatrogenic thickening of the labium. We reviewed, defined, and assessed labial configurational variety, neurovascular supply, reduction techniques, and patient's preferences as the considerations relevant to the choice of labiaplasty technique. Based on this review, an algorithm was constructed that leads to a choice of reduction technique through five decisions to be made regarding (1) resection or (partial) retention of the labial free rim, (2) the measure of required labial width reduction, (3) labial vascular status, (4) prevention of iatrogenic labial thickening, and (5) preservation of labial sensibility. The choice of techniques includes edge trimming, central spindle form de-epithelialization or full-thickness resection, and three modifications of the wedge resection or de-epithelialization technique. These three modifications comprised a modified anterior resection or de-epithelialization combined with posterior flap transposition, a custom flask resection or de-epithelialization, and a modified posterior wedge resection or de-epithelialization combined with anterior flap transposition. Use of the five decisional steps and the inclusion of modifications of all three conventional reduction techniques offer an improved algorithm for the choice of labioplasty technique.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.580-586
• /
• 2007

Purpose: High tension electrical injuries result in major tissue(eg. bones, tendons, vessels and nerves) destruction. Therefore, the management of mutilating wrist caused by electrical injuries still represents a challenge. There are various approaches to this problem including local and regional flaps as well as pedicled distant flaps and microsurgical free tissue transfer. Although it has not gained wide acceptance, because of the technically demanding dissection of the pedicle, posterior interosseous flap is now well accepted for the reconstruction of hand and wrist in hand surgery. The principal advantages of this flap are minimal donor site morbidity, minimal vascular compromise, one stage operation. This flap also offers the advantages of ideal color match and composition. In this report, we describe our experience with the reverse posterior interosseous island flap for reconstruction of mutilating wrist with main vessel injuries. Methods: From October, 2004 to June, 2006, we treated 11 patients with soft tissue defects and main vessel injuries on the wrist that were covered with reverse posterior interosseous island flap. Results: These 11 patients were all male. The ages ranged from 27 to 67 years(mean age 41.75) and the follow-up period varied from 4 to 19 months. Complete healing of the reverse posterior interosseous island flaps were observed in 11 patients(12 flaps). The majority of these flaps showed a certain degree of venous congestion, which in a flap was treated with medical leech. 1 flap has partial necrosis owing to sustained venous congestion, requiring secondary skin graft. flap size varied from $3.5{\times}8cm$ to $10{\times}12cm$(mean size $6.4{\times}8.9m$). The donor site defect was closed directly in 5 flaps, and by skin graft in 7 flaps. Conclusion: We found that the reverse posterior interosseous island flap is reliable and very useful for reconstruction of mutilating wrist and we recommend it as first choice in coverage of soft tissue defects in the wrist with electrical arc injuries.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.27-34
• /
• 2011

Purpose: Anterolateral thigh (ALT) perforator free flap is commonly used because of its various benefits. The author reports important factors of preoperative and perioperative ALT perforator free flap and causes of failure. Methods: 84 patients who were treated with ALT perforator free flap from December 2004 to 2008, and February 2010 to April 2010 were studied. 61 patients were male and 23 were female. The mean age of patients was 51.1. The main cause was neoplasm and the main reconstructive areas were head and neck area. The size of flap was various from $3{\times}4$ to $12{\times}18$ cm. 6 patients received split thickness skin graft at donor site. Preoperative angiography was checked to all patients. Results: Among the 84 patients, partial necrosis of flaps occurred in 4 patients because of atherosclerosis, varicose vein, or inattention of patient, etc. And total flap necrosis in 5 patients because of abnormal vessels of recipient area or delay of operation, etc. One case of serous cyst was found as the complication of donor area. Two cases of skin graft on donor site were done because of suspected muscle compartment syndrome, 4 cases of that because of large flap. Septocutaneous perforators were found in 7 cases. The author couldn't find reliable perforator in 3 cases, ipsilateral anteromedial thigh perforator and contralateral ALT perforator and latissimus dorsi musculocutaneous free flap were done instead of ALT. There was no case which needed reoperation because of the impairment of blood supply, and 3 cases were revised by leech because of the burn injury by a lamp or venous congestion. Conclusion: Although ALT perforator free flap is widely used with its various merits, many factors such as preoperative condition of donor or recipient area, morphology of defect and operating time need to consider to prevent flap necrosis. And operators should need careful technique because septocutaneous perforator is uncommon, and musculocutaneous perforator is common but difficult to dissect.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.736-741
• /
• 2010

Purpose: Radical surgical extirpation in advanced breast cancer patients produces extensive loss of skin with large defects requiring plastic surgical procedures for the closure. Many reconstructive methods exist, the choice of which depends upon the characteristic of the wound, extent of resection and patient comorbidities. For adequate coverage of the large skin defects following resection of advanced breast cancer, current authors have performed a thoracoabdominal flap. Methods: From August 2008 to June 2009, 4 cases of thoraco-abdominal flap were performed for chest wall reconstruction after mastectomy of advanced breast cancer. Flap dissection was entirely performed in a subfascial plane and the flap involving the external oblique abdominal muscle. The flap was rotated clockwise in left chest wall defects and counterclockwise in right chest defects and the donor site was closed directly. Results: Their mean age, 55.7 years and the average follow-up interval was 9 months. Patients' oncologic status ranged from stage IIIc to stage IV, it was classified according to the TNM staging system. Flap dimensions ranged between $15{\times}15$ and $25{\times}25\;cm$. One flap sustained a partial loss at the distal margin and revision with pectoralis major musculocutaneous island flap. Conclusion: Large chest wall reconstructions are usually required after radical excision of advanced cancer stages patients with poor general conditions. Thoracoabdominal flap is a simple, quick single-stage procedure, and offer to patient fast recovery, low complication rate, enabling further concomitant adjuvant therapy.

• Proceedings of the KWS Conference
• /
• 1997.05a
• /
• pp.107-111
• /
• 1997

In this paper distribution of welding residual stress on the double fillet welded joint which exits and not exits root gap, i.e. full penetration and partial penetration is investigated by two dimensional cunduct and thermal elasto-plastic analysis. And stress distribution on notch-tip of the structure where welding residual stress regarded as initial stress and then external load is added is also investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1569-1572
• /
• 2003

Meshfree approximations exhibit significant potential to solve partial differential equations. Meshfree methods have been successfully applied to various problems which the traditional finite element methods have difficulties to handle, including the quasi-static and dynamic fracture. large deformation problems, contact problems, and strain localization problems. A meshfree method based on the reproducing kernel particle approximation(RKPM) is applied to sheet metal forming analysis in this research. Metal forming examples, such as stretch forming and flanging operation, are analyzed to demonstrate the performance of the proposed meshfree method for largely deformed elasto-plastic material.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.282-289
• /
• 2014

After being laminated with a combination of glass fiber reinforced plastic and plywood, the GFRP laminated plate was densificated for 1 hour at $150^{\circ}C$ with pressure of $1.96N/mm^2$. A partial reinforced beam was produced by attaching the 5 GFRP laminated plates to the joint of glulam and the column. In addition, the column to beam joint was produced by using reinforced laminated wooden pin which was made of GFRP sheet and plywood, fiber glass reinforced cylindrical-LVL column. The joint was made of round log, glulam and drift pin as the reference specimen, and its moment resistance was evaluated. As a result, the strength performance of specimens with partial reinforced beams were 1.8 times stronger than the reference specimen on average. Furthermore, rupture was neither occurred on partial reinforced beam nor column. Toughness and stiffness of joints were also fine. The GFRP sheet reinforced laminated plate showed better reinforcement effect than GFRP textile reinforced one. GFRP sheet was inserted into each layer of laminate, and it showed good condition in rotation-angle and strength, therefore it is the most appropriate to reinforce the part of the beam.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.129-136
• /
• 2010

Purpose: Anatomically, the foot is provided with insufficient blood supply and is relatively vulnerable to venous congestion compared to other parts of the body. Soft tissue defects are more difficult to manage and palliative treatments can cause hyperkeratosis or ulcer formation, which subsequently requires repeated surgeries. For weight bearing area such as the heel, not only is it important to provide wound coverage but also to restore the protective senses. In these cases, application of flaps for hind foot reconstruction is widely recognized as an effective treatment. In this study, we report the cases of soft tissue reconstruction for which various types of flaps were used to produce good results in both functional and cosmetic aspects. Methods: Data from 37 cases of hind foot operation utilizing flaps performed between from June 2000 to June 2008 were analyzed. Results: Burn related factors were the most common cause of defects, accounting for 19 cases. In addition, chronic ulceration was responsible for 8 cases and so forth. Types of flaps used for the operations, listed in descending order are radial forearm free flap (18), medial plantar island flap (6), rotation flap (5), sural island flap (3), anterolateral thigh free flap (2), lattisimus dorsi muscular flap (2), and contra lateral medial plantar free flap (1). 37 cases were successful, but 8 cases required skin graft due to partial necrosis in small areas. Conclusion : Hind foot reconstruction surgeries that utilize flaps are advantageous in protecting the internal structure, restoring functions, and achieving proper contour aesthetically. Generally, medial plantar skin is preferred because of the anatomical characteristics of the foot (e.g. fibrous septa, soft tissue for cushion). However alternative methods must be applied for defects larger than medial plantar skin and cases in which injuries exist in the flap donor / recipient site (scars in the vicinity of the wound, combined vascular injury). We used various types of flaps including radial forearm neurosensory free flap in order to reconstruct hind foot defects, and report good results in both functional and cosmetic aspects.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.521-526
• /
• 2008

Purpose: Most burn scar contractures are curable with skin grafts, but free flaps may be needed in some cases. Due to the adjacent tissue scarring, local flap is rarely used, and thus we may consider free flap which gives us more options than local flap. However, inappropriate performance of free flap may lead to unsatisfactory results despite technical complexity and enormous amount of effort. The author will discuss the points we should consider when using free flaps in treating burn scar contractures Methods: We surveyed patients who underwent free flaps to correct burn scar contractures from 2000 to 2007. We divided patients into two groups. The first group was those in which free flaps were inevitable due to exposure of deep structures such as bones and tendons. The second group was those in which free flap was used to minimize scar contracture and to achieve aesthetic result. Results: We performed 44 free flap on 42 patients. All of the flaps were taken well except one case of partial necrosis and wound dehiscence. Forearm free flap was the most common with 21 cases. Most of the cases(28 cases) in which free flaps were inevitable were on the wrist and lower limbs. These were cases of soft tissue defect due to wide and extensive burns. Free flaps were done in 16 cases to minimize scar contracture and to obtain aesthetic outcome, recipient sites were mostly face and upper extremities. Conclusion: When using free flaps for correction of burn scar contractures, proper release and full resurfacing of the contracture should be carried out in advance. If inadequate free flap is performed, secondary correction is more challenging than in skin grafts. In order to optimize the result of reconstruction, flap thickness, size and scar of the recipient site should be considered, then we can achieve natural shape, and minimize additional correction.