• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• Journal of Chest Surgery
• /
• v.39 no.6 s.263
• /
• pp.440-448
• /
• 2006

Background: Surgery of descending thoracic or thoracoabdominal aorta has the potential risk of causing neurological injury including spinal cord damage. This study was designed to find out the risk factors leading to spinal cord and brain damage after surgery of descending thoracic and thoracoabdominal aorta. Material and Method: Between October 1995 and July 2005, thirty three patients with descending thoracic or thoracoabdominal aortic disease underwent resection and graft replacement of the involved aortic segments. We reviewed these patients retrospectively. There were 23 descending thoracic aortic diseases and 10 thoracoabdominal aortic diseases. As an etiology, there were 23 aortic dissections and 10 aortic aneurysms. Preoperative and perioperative variables were analyzed univariately and multivariately to identify risk factors of neurological injury. Result: Paraplegia occurred in 2 (6.1%) patients and permanent in one. There were 7 brain damages (21%), among them, 4 were permanent damages. As risk factors of spinal cord damage, Crawford type II III(p=0.011) and intercostal artery anastomosis (p=0.040) were statistically significant. Cardiopulmonary bypass time more than 200 minutes (p=0.023), left atrial vent catheter insertion (p=0.005) were statistically significant as risk factors of brain damage. Left heart partial bypass (LHPB) was statistically significant as a protecting factor of brain (p=0.032). Conclusion: The incidence of brain damage was higher than that of spinal cord damage after surgery of descending thoracic and thoracoabdominal aorta. There was no brain damage in LHPB group. LHPB was advantageous in protecting brain from postoperative brain injury. Adjunctive procedures to protect spinal cord is needed and vigilant attention should be paid in patients with Crawford type II III and patients who have patent intercostal arteries.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.5
• /
• pp.474-482
• /
• 1993

Background: As a physiologic plasminogen activator, tissue-type plasminogen activator (t-PA) could induce effective thrombolysis in massive pulmonary embolism, without the risk of systemic hemorrhage. However, therapeutic doses of t-PA has been associated with systemic lytic state, and fibrin selectivity may be influenced by the dosing regimen of t-PA. To investigate the effects of duration of t-PA infusion on blood coagulation system, we performed this study. Method: In a canine model of pulmonary embolism, which was induced by injection of autologous blood clots, we administered equal doses of t-PA (1 mg/kg) over 15 minutes in $t-PA_{15}$ group, over 180 minutes in $t-PA_{180}$ group, and only saline in control group. Then serial blood samplings were made to check complete blood count, prothrombin time, activated partial thromboplastin time, thrombin time, fibrin, plasminogen, ${\alpha}_2$-antiplasmin, coagulation factor V and VIII, and fibrin(ogen) degradation products. Results: 1) In all 3 groups, complete blood count showed same changes. Hemoglobin, hematocrit and platelet count decreased, but WBC count increased. 2) Prothrombin time, activated partial thromboplastin time, and thrombin time were prolonged during 15-60 minutes after t-PA administration in $t-PA_{15}$ group, and from 30 minutes through 180 minutes after administration in $t-PA_{180}$ gorup. 3) Fibrin, ${\alpha}_2$-antiplasmin, and cogulation factor V and VIII decreased in both $t-PA_{15}$ and $t-PA_{180}$ group, but returned to basal levels earlier in $t-PA_{15}$ group. 4) Fibrin(ogen) degradation products increased after pulmonary embolism in all groups, and further increased in both $t-PA_{15}$ and $t-PA_{180}$ groups after t-PA infusion. But more pronounced increment was noted in $t-PA_{180}$ gorup. Conclusion: In pulmonary embolism, the shorter (15 minutes) infusion of t-PA would have less risk of systemic hemorrhage than the longer (180 minutes) infusion when the doses is equal. And, this suggests that manipulating the duration of t-PA infusion can reduce the risk of major bleeding.

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.111-121
• /
• 2015

Purpose - This study's purpose is to investigate the impact of supply chain management (SCM) factors among targeted Korean distribution firms. Antecedents are established for supply chain orientation (SCO) for the management and organization of cultural assets. The research sets up SCO corresponding to management cultural assets and to organizational factors in the results. The research model is created to examine the SCO based on a strategic perspective and the operational performance of the SC and SCM. In addition, an integrated model is constructed to analyze the moderating effect by setting partner cooperation as a relational capital factor. The main aim of this study is to analyze the characteristics of the supply chain structure as a source of competitive advantage for distribution service firms participating in the supply chain. In the moderating effects analysis, the role of partner cooperation as relational capital is examined in detail. Research design, data, and methodology - The study examined the existing research related to supply chains, discussing the antecedents of the performance of SCM and SCO. SCM was established with the partner's cooperation as relational capital. Including the moderating effects of the partner cooperation, the research proposed a seven hypotheses path analysis model. The samples were collected from the Korean export enterprises in the distribution service sector, with 185 samples selected for the final analysis. To try and measure the four latent variables presented in the analysis model based on existing studies, 22 measurement items were used. The empirical analysis used the appropriate PLS (partial least squares) method on the path analysis reliability and validity and for common method bias. After testing the seven hypotheses, the research tested the moderating effects to the path analysis. Using PLS as structural equation modeling, the seven hypotheses were tested including the moderating effects of the partner relational capital on the 185 samples. Results - In the results, the SCO had a positive impact on both SCM and the relational capital of partner cooperation. The SCM had a significant impact on the operational performance of the SC. Further, partner cooperation also had a significant impact on SCM and the operational performance of the SC. The moderating effect analysis of the SCM and partner cooperation found a significant impact on the operational performance of the SC. On the other hand, the moderating effect of the SCO and partner cooperation did not affect the SCM. Conclusion - The results of this research show that the existing supply chain-related research can be applied to the operational performance of the SC for a Korean distribution service firm. In view of the fact that SCO is a source of competitive advantage, it should be taken into account when a firm wants to improve the performance of the SCM of the distribution service. This is because it can be assumed that SCO plays a role in supply chain management for the distribution firm.

• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.607-618
• /
• 2022

The purpose of this study was to identify the effect of family resilience on willingness for self-sufficiency in self-sufficiency program participants and to verify the mediating effect of mental health in the relationship. The survey subjects were 283 participants from a local self-support center in Gangwon-do. As for the analysis method, descriptive statistics and difference verification were performed. Also, hierarchical regression analysis and mediating effect method were performed to verify the research model. First, as a result of the difference test, the level of self-support was higher when there was a caring family. The level of family resilience was higher in those who were in their 40s and 50s than in their 30s or less, married than unmarried, had normal or excellent health conditions than deplorable health conditions, and had a caring family. Mental health quality was higher in very healthy people rather than in people who had poor health. Also, people with no dept had a higher mental health quality. Second, as a result of analyzing the relationship of influence on self-support, the higher the age, the more caring families, the higher the level of family resilience and mental health, the higher the self-sufficiency. Third, as a result of the mediating effect analysis, mental health had a partial mediating effect between family resilience and willingness for self-sufficiency. Therefore, we discussed the implications for improving family resilience and mental health as a factor in improving the level of self-sufficiency in self-sufficiency program participants.

• The Korean Journal of Pharmacology
• /
• v.24 no.2
• /
• pp.233-240
• /
• 1988

A simple and selective isocratic HPLC method for the analysis of tissue polyamine contents is described and applied on the study of the changes of the hepatic polyamine contents after partial hepatectomy in male rats. The hepatic polyamines are extracted with 0.4 M perchloric acid containing 2 mM disodium EDTA, and then the extract is redissolved in 100 ul of 1 M sodium carbonate and incubated with 300 ul of FNBT-dimethylsulfoxide (1: 100) mixture. The N-2'-nitro-4'-trifluoromethylphenyl drivatives of polyamines are separated through a ERC-ODS column in an isocratic mode with an acetonitrile-water (80:20) mobile phase within 20 min. per a sample, while monitoring the effluent at 242 nm. This improved method which could detect subnanogram of each polyamines is highly specific and reproducible as evidenced by the application of it on the study of the changes of polyamine contents in the regenerating rat liver after partial hepatectomy.

• The Korean Journal of Applied Statistics
• /
• v.21 no.1
• /
• pp.141-149
• /
• 2008

Recently we frequently analyze multivariate data with quite large number of variables. In such data sets, virtually duplicated variables may exist simultaneously even though they are conceptually distinguishable. Duplicate variables may cause problems such as the distortion of principal axes in principal component analysis and factor analysis and the distortion of the distances between observations, i.e. the input for cluster analysis. Also in supervised learning or regression analysis, duplicated explanatory variables often cause the instability of fitted models. Since real data analyses are aimed often at multiple purposes, it is necessary to reduce the number of variables to a parsimonious level. The aim of this paper is to propose a practical algorithm for selection of a subset of variables from a given set of p input variables, by the criterion of minimum trace of partial variances of unselected variables unexplained by selected variables. The usefulness of proposed method is demonstrated in visualizing the relationship between selected and unselected variables, in building a predictive model with very large number of independent variables, and in reducing the number of variables and purging/merging categories in categorical data.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.4
• /
• pp.1-11
• /
• 2001

This study was carried out to analyze the characteristics of forest environmental and stream morphological factors by using the quantification theory(I) for evaluation of the watershed stability. Present annual mean sediment yield of erosion control dams were investigated in 167 sites of erosion control dam constructed during 1986 to 1999 in Gyeongbuk. The results obtained from this study were summarized as follows; According to the coefficients of partial correlation, each factor affecting to sediment was shown in order of gravel contents, number of first streams order, number of total streams, length of total streams, forest type, length of main stream, parent rock, stand age, soil texture, stream order, slope gradient, soil depth and aspect. Descriptions of class I were as follow; Igneous rock of parent rock, hardwood stands of forest type, less than 20 year of stand age, less than 30cm of soil depth, sandy clay loam of soil texture, more than 41% of gravel contents, south~east of aspect, 2,501~3,500m of length of main stream, 21~25 of number of total streams, 5,501~10,000m of length of total streams, 3 or more than 4 of stream order, more than 16 of number of first stream orders and more than $31^{\circ}$ of slope gradient. Descriptions of class II were as follow; Metamorphic rock of parent rock, coniferous stands of forest type, more than 25 year of stand age, 31~40cm of soil depth, silt loam of soil texture, 11~20% of gravel contents, north~west of aspect, 2,501~3,500m of length of main stream, 16~20 of number of total streams, 3,501~5,500m of length of total streams, 3 of stream order, 11~15 of number of first stream orders and more than $31^{\circ}$ of slope gradient. Descriptions of class III were as follow; Sedimentary rock of parent rock, mixed stands of forest type, more than 25 year of stand age, more than 51cm of soil depth, silty clay loam of soil texture, less than 10% of gravel contents, south~west of aspect, less than 500m of length of main stream, less than 5 of number of total streams, less than 1,000m of length of total streams, less than 1 of stream order, less than 2 of number of first stream orders and less than $25^{\circ}$ of slope gradient. The prediction method of suitable site for erosion control dam divided into class I, II, and III for the convenience of use. The score of class I evaluated as a very unstable area was more than 8.4494. A score of class II was 8.4493 to 6.0452, it was evaluated as a moderate stable area, and class III was less than 6.0541, it was evaluated as a very stable area.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.71-81
• /
• 2013

Purpose - The TOEIC test has been leading the change in the quality and the globalization of companies for about last 30 years. The TOEIC test is taken by about two million people each year and is used as a criterion to select new employees in companies or government offices, for performance ratings, and for overseas posting selections. Universities also use TOEIC test in various ways. Since the TOEIC test is used for the selection of new students for admission, transferring extra credits, scholarships, graduation certification, and admission of international students studying abroad, many universities all over the country provide students with TOEIC study lectures through their own language institutes. Despite the fact, there has been no research on the service quality or even the current situation of these institutes. Thus, this study aims to evaluate the factors that impact TOEIC lecture service quality and analyzes the effect of the expectation related to the education service quality and the result of education on intentional behavior. Research design, data, methodology - Data was collected by administering a survey to current TOEIC students from different university language institutes. The survey questionnaire comprised of a five-point Likert scale. The demographic analysis was conducted using the frequency analysis method and the factor analysis was conducted to verify the validity of questionnaire over any variable. The reliability analysis was conducted to verify the reliability of the results. Besides, multiple regression analysis, regression analysis, and mediated effect verification were also conducted. For education service quality, four different independent variables such as reliability, response, conviction, and sympathy were considered using the SERVQUAL survey model. Based on the research models, the study hypotheses below were formulated in order to recognize an effect relationship between the variables. The four hypotheses are, "the hypothesis on education service quality and TOEIC study result expectation," "the hypothesis on education service quality and behavioral intention," "the hypothesis on study result expectation and behavioral intention," and "the hypothesis on study result expectation and mediated effect." Results - The results are as follows. First, the factors like response, conviction, and sympathy have a positive influence on TOEIC study result expectations. Second, the TOEIC study result expectation has a positive influence on the factors of behavioral intention such as re-sign up, positive word-of-mouth, "loyalty towards school." Third, it was verified that the mediated effect on behavioral intention was influenced by education service quality at university foreign language institute, while the study result expectation has only a partial mediated effect. Conclusions - The implications of this study are summarized as follows: First, it suggests a new research model for the effect of the expectation related to the education service quality and the result of education in the university language institutes on the behavioral intention. Second, it has established a relationship between the education service quality and study result expectation by verifying the mediated effect on them.

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.85-99
• /
• 1997

The improvements of berth productivity is closely related to berth/port systems and its relationship extends to the overall pattern of port development/logistics, transport and trade. Since ports in general and berths in specific function as a bridge transferring seaborne cargoes from seaside to landside and vice versa, berth productivity improvements should be considered in terms of the total system in which the cargoes are transported from origin to destination via berths/ports. In that respect, the objective of this study is to improve berth productivity which is a vital factor in the strategic planning in port development and operation and logistics. According to a literature survey on the subject, the contents of the studies have been limited to either a macro-perspective or a micro-perspective which is only a partial solution to the problem. Hence, this limitation requires an integrated approach to find and ultimate solution, which should be considered not separately, but as a whole. The contents and scope of this study cover the improvements of berth productivity in conjunction with strategic planning in port development. efficient operation and logistics from two different viewpoints, macro- and micro-perspective. After that, a combination of these two perspectives is applied to the integrated approach due to lacking a comprehensive perspective from either macro-approach or micro-approach. In reality, a port itself is a complex and dynamic organization. Therefore, a comprehensive insight needs an integrated approach for the long-term national economic development. In this approach, the utmost importance is how to find the bottlenecks and to solve the problems effectively from the beginning stage in port development. In conclusion, derived from the macro- and micro-perspective. the attempt to establish an integrated approach is the merit of this study, which is required as a comprehensive measure since none of the two can be a solution independently. In terms of reinforcing this study, it needs further empirical research due to the restriction of the theoretical method of this paper. Consequently, the reinforced research will be able to enhance the integrated approach on the basis of the conceptual perspective.