• International Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2007

The object of this research was to observe the female college 220 students of aged 19-24 for four years and to examine somatotypes distribution; this research intends to contribute to the fitness of clothes by studying the body distribution that affects the clothing structure. The measurement and wearing experiment for somatotypes are done years annually. The average, standard deviation and coefficient of variation was calculated by the SAS program. The research results are as follows: The three somatotypes of side view silhouette (straight type, bend-forward type, lean-back type) showed fairly even distribution. As a result of dressing experiment with the basic bodice pattern, the most influential factor on its suitability was found to be the neck area, shoulder and ease of bodice respectively. The partial body types to observe were categorized as: shoulder(normal, slope, squared), bust(A cup, B cup, C cup), hips (normal, droop, projecting). As for the result for full body type by BMI, normal type was most dominant, and for the categorization by drop, the type A which is with small breasts and large hips was most prevalent.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.864-875
• /
• 1999

This study was done to classify type os arms and to correspond these types with partial somatotype of upper body such as lateral views of upper body shapes of shoulder. The subjects of this study were female college students of twenties 58 anthropometric and photographic data were measured. The results were as follows : 1. Form the factor analysis arm girth/armscye size factor arm length factor the slope of lower arm, arm factor the curves of armscye the roundness of arm/shapes of shoulder the slope of upper arm factor were obtained. 2. By using factor scores 4 clusters of arm types were extracted. The characteristics of these clusters were projections of armscy slant of lower arm thick-set canelike. 3. Four types of arm were corresponded with the specified lateral views of upper body directions of shoulder slopes of shoulder.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.3
• /
• pp.73-79
• /
• 2008

Background : Treadmill training has been proposed as a useful adjunct to conventional physical therapy to restore ability to walk after stroke. The purpose of this study to inform clinical practise by evaluating the research evidence for the effectiveness of treadmill training after stroke. Methods : We searched to the effectiveness of any form of intervention for effect of treadmill training by Dankook University electronic library databases of Medline, Embase, Cinahl, Amed and PEDro combined with a hand search of papers published in relevant peer-reviewed journals. Any type of study relevant to the topic published in English during time period from 1980 to 2007 was included. Results : The literature search identified 35 studies. The included studies enrolled a total of 374 subjects. 1. Treadmill retraining without partial body weight support might be more effective than no treatment at improving gait velocity, get up and go time, gait endurance and step length symmetry. 2. Treadmill retraining with partial body weight support might be more effective than no treatment in improving step length symmetry, gait velocity, gait endurance and balance. 3. Treadmill retraining might be more effective with partial body weight support than without it at improving gait velocity and motor improvement as measured by The Stroke Rehabilitation Assessment of Movement(STREAM). 4. Treadmill retraining without partial body weight support may be no different from physiotherapy and increase gait velocity to conventional gait therapy. 5. Treadmill retraining with partial body weight support may be no different from physiotherapy for gait velocity, motor recovery and balance. Conclusion The review suggests that although treadmill training of gait, especially with partial body weight support, might Improve gait parameters and functional mobility, unless treadmill training is directed at Improving gait speed it might be no more effective than conventional physical therapy at improving gait parameters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1085-1098
• /
• 2011

In the $21^{st}$ century, technology is a tool for the expansion of the five senses and physical ability that works as an element for posthuman identity. This study analyzes and theorizes on the characteristics of the posthuman body in fashion illustration. The method of this study analyzes documentaries about posthuman and fashion illustration. The results are as follow. Posthuman body types are classed as hybrid body, plastic surgery body, and digital body. The characteristics of the posthuman body are categorized as ultra- functional prosthetic, mythical undifferentiated, radical plastic surgery type and post-physical digitization type. The ultra-functional prosthetic type shows a restored body and upgraded functional body through a machine hybrid, cyborg suit and mannequin hybrid. It is a break from classical gender identity to form a nerve sense extension that displays physical and abstract power. The mythical undifferentiated type shows a therianthropic form, parts of an animal body, radical skin and gender bending. It represents the return to an undifferentiated world, the desire of a powerful being and the possibility of radical transformation. The radical plastic surgery type shows a photomontage of an ideal body, transgendered body, grotesque body marking, absence of partial or overall face organ and the expansion of abnormal body organs. It represents the expression of narcissism, unconscious desire, fantasy, fear and suggests an alternative ideality, sexual attachment and ambiguous gender identity. The post-physical digitization type shows an imperfect form or duplicated ego image through the omission of the body silhouette or detailed form, fragmented image using net, representative self like optical illusion using typography, an imperfect vague silhouette and immaterial body outline through the use of virtual light. It represents the lack of desire, narcissism, fluidity in a virtual space, the continued creation of a new self, ambiguous gender identity and the liberation of environment, sex, and race. Likewise, the posthuman in fashion illustration shows the absence of a species boundary, destruction of classical gender identity, a new personality and virtual self image.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.30-35
• /
• 2014

According to weight lightning trend of automobile body, necessity of resistance spot welding (RSW) of Mg alloy on automobile industry is increasing rapidly because of the highest specific strength among commercial metals. Mg alloy has low electric resistance and high thermal conductivity like as Al alloy, so that needs applying high current in short time when welding. Thick oxide film of Mg alloy pollutes the electrodes and makes partial current carrying paths when on welding. Partial current carrying paths signify excessive concentration of current. There can initiate expulsion easily and reduces electrode life rapidly. Generating partial current carrying paths and expulsions are influenced by shapes of electrode. Therefore, electrode life also influenced by shape. In this study, we perform life test of RSW electrode of radius type. Measure tensile shear load and nugget size every spot alternately. As a result, radius type electrode can extend life over twice as dome type electrode.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.3
• /
• pp.348-357
• /
• 2000

The purpose of this study is to examine the effect of partial osseointegration situation on bone loading patterns around two different free-standing screw shaped implants (Nobel Biocare, Gothenburg, Sweden and Degussa-Huls, Hanau, German). Two dimensional axisymmetric Finite element models of two implants(10mm length and 4mm diameter) were created according to different bone quantity, quality and osseointegration ratio in maxilla and mandible bone. At the same time uni-cortical and hi-cortical fixation were analyzed. Generally, full bond case showed less stress than partial bond case in overall area and mandibular model showed less amount of stress than that of maxilla model. Maximum stress of the Branemark implant is higher than that of ANKYLOS regardless of bonding ratio at crestal and apex region. However, more stress concentration was noted in ANKYLOS implant at screw body area especially in mandible. The effect of bicortical fixation on crestal bone stress reduction is dramatical in mandible however, there was no significant effect in maxillary case. The effect of partial bond on stress distribution was more significant at screw body and apex region than in crestal region. Partial bond cases demonstrated greater stress accumulation in trabecular bone than cortical bone. It is concluded that the more accurate model of implant and bone which affects stress and strain distribution is needed to mimic in vivo behavior of implants.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1633-1641
• /
• 2020

Objective: The objective of this study was to develop a model for estimating the carcass weight of Hanwoo cattle as a function of body measurements using three different modeling approaches: i) multiple regression analysis, ii) partial least square regression analysis, and iii) a neural network. Methods: Data from a total of 134 Hanwoo cattle were obtained from the National Institute of Animal Science in South Korea. Among the 372 variables in the raw data, 20 variables related to carcass weight and body measurements were extracted to use in multiple regression, partial least square regression, and an artificial neural network to estimate the cold carcass weight of Hanwoo cattle by any of seven body measurements significantly related to carcass weight or by all 19 body measurement variables. For developing and training the model, 100 data points were used, whereas the 34 remaining data points were used to test the model estimation. Results: The R² values from testing the developed models by multiple regression, partial least square regression, and an artificial neural network with seven significant variables were 0.91, 0.91, and 0.92, respectively, whereas all the methods exhibited similar R² values of approximately 0.93 with all 19 body measurement variables. In addition, relative errors were within 4%, suggesting that the developed model was reliable in estimating Hanwoo cattle carcass weight. The neural network exhibited the highest accuracy. Conclusion: The developed model was applicable for estimating Hanwoo cattle carcass weight using body measurements. Because the procedure and required variables could differ according to the type of model, it was necessary to select the best model suitable for the system with which to calculate the model.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.482-489
• /
• 2018

Most of the numerical and experimental studies on supercavitating flows are focused on the cavitator only. However, the partial cavity growing into the supercavity is affected by the shape of the body placed behind the cavitator. In this paper, we develope a numerical method which is based on the boundary element method to predict supercavitating flow around three-dimensional axisymmetric bodies. We estimate the influence of the body shape on the supercavity growth. Here, we consider various parameters of the body such as cavitator shape, shoulder length and body diameter, and compare the results with the case of the cavitator only. In summary, it is found that the body may impede the cavity growth, the shoulder mainly affects the cavity length, and the supercavity occurring in the cone type cavitator is strongly influenced rather than that of the disk type cavitator.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.734-742
• /
• 2011

This study has been undertaken as a basic research for automatic pattern design for baseball uniforms manufactured under custom-MTM system, propose building up of a system whereby various partial patterns are combined under an automatic design system and develop a multi-combination type pattern searching algorithm which allows development of a various designs. As a result of this, type classification based on pattern design elements includes side, open, collar, facing and panel type. Design have been divided into coarse classification ranging from level 1 to 7 according to pattern design elements, based on a design distribution chart. Out of 7 such levels, 3 major types determining design which are, more specifically, level 1 sleeve type, level 2 open type and level 3 collar type, have been taken and combined to determine a total of 12 types to be used for design classification codes. Respective name of style and patterns have been coded using alphabet and numerals. Totally, pattern searching algorithm of multi-combination type has been developed whereby combination of patterns belonging to a specific style can be retrieved automatically once that style name is designated on the automatic pattern design system.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.1
• /
• pp.25-34
• /
• 2016

Treatment of missing mandibular 4 incisors is often thought to be easier then other place during surgical and prothetic procedure. But clinicians encounter unexpected difficulties such as restricted implant site due to mesio-distal width of mandibular incisors, limited space as a result of crowing and mesial drift, esthetic problem after severe alveolar bone resorption, and difficulties of provisionalization Through cases, possible treatment options for missing mandibular incisors would be discussed. Treatment options for missing mandibular 4 incisors Place narrow type implant or one body mini implant on exact tooth position when there is no bone resorption Regular size implant on interseptal bone area when there is severe bone resorption Consider using resin bonded bridge(resin retained bridge/resin bonded fixed partial denture) as a tentative prosthesis when patient resists extracting remaining incisors with poor prognosis.