• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.301-311
• /
• 2000

For effective part modifications which is necessary in the design process frequently, variational geometric modeling with constraint management being used in a wide. Most variational geometric modeling methods, however, manage just the constraints about sketch elements used for generation of primitives. Thus, not only constraint propagation but also re-build of various modeling operations stored in the modeling history is necessary iota part geometry modifications. Especially, re-build of high-cost Boolean operations is apt to deteriorate overall modeling efficiency abruptly. Therefore, in this paper we proposed an algorithm that can handle all geometric entities of the part directly. For this purpose, we introduced eight type geometric constraints to the various geometric calculations about all geometric entities in sweepings and Boolean operations as well as the existing constraints of the sketch elements. The algorithm has a merit of rapid part geometric modifications through only constraint propagation without rebuild of modeling operations which are necessary in the existing variational geometric modeling method.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.211-216
• /
• 2004

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through DFSS methodology research and analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.37-41
• /
• 2007

The purpose of this study is to design the free forging tool for the high accuracy of the thrust shaft in marine engine. In order to do it, the principal factor controlling the uprightness of the flange part and the excessive margin and folding in middle part of thrust shaft after forging process was identified using FEA. Based on the results, the optimum shape of free forging tool and working method were proposed and verified through the mock-up and the actual product test.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.390-396
• /
• 2002

This study is concerned with the strict machine-cell and part-family grouping (MCPFG) in cellular manufacturing system design. Most of MCPFG methodologies often suffer from improper assignment of machines and parts in which exceptional machine has more common operations with machines in a cell other than its own cell and exceptional part has more operations through machines in a cell other than the cell corresponding to its own family. This results in the loss of similarity in part design or common setup of machines and the benefits from the conversion of job shop manufacturing into cellular manufacturing are lost. In this study, a two-phase methodology is proposed to find the machine-cells and part families under the strict constraints in which all machines and parts are assigned to its most proper cells and families. Test results with moderately medium-sized ill-structured MCPFG problems available from the literature show the substantial efficiency of the proposed approach.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.04a
• /
• pp.431-436
• /
• 2006

6 Sigma uses DMAIC (Define, Measure, Analyze, Improve, Control) methodology as process of solving problem. Enterprise already propelling successfully 6 sigma such as Motorolla, GE and consulting companies leading 6 sigma also propose DMAIC methodology traditionally. But from making 6 sigma activated, enterprises and 6 sigma consulting companies propose 6 sigma methodology matching office indirection part and research and development part. As the forward example, DFSS(Design For Six Sigma) is R&D part application in GE. This study investigates 6 sigma methodology corresponding to Right Process of the kernel factor. Especially for optimum design of the R&D part, revise DFSS definition and general concept organization through Lean DFSS methodology research and analysis.

• Advances in aircraft and spacecraft science
• /
• v.4 no.3
• /
• pp.297-316
• /
• 2017

With rapid growth in the complexity of large scale engineering systems, the application of multidisciplinary analysis and design optimization (MDO) in the engineering design process has garnered much attention. MDO addresses the challenge of integrating several different disciplines into the design process. Primary challenges of MDO include computational expense and poor scalability. The introduction of a distributed, collaborative computational environment results in better utilization of available computational resources, reducing the time to solution, and enhancing scalability. SORCER, a Java-based network-centric computing platform, enables analyses and design studies in a distributed collaborative computing environment. Two different optimization algorithms widely used in multidisciplinary engineering design-VTDIRECT95 and QNSTOP-are implemented on a SORCER grid. VTDIRECT95, a Fortran 95 implementation of D. R. Jones' algorithm DIRECT, is a highly parallelizable derivative-free deterministic global optimization algorithm. QNSTOP is a parallel quasi-Newton algorithm for stochastic optimization problems. The purpose of integrating VTDIRECT95 and QNSTOP into the SORCER framework is to provide load balancing among computational resources, resulting in a dynamically scalable process. Further, the federated computing paradigm implemented by SORCER manages distributed services in real time, thereby significantly speeding up the design process. Part 1 covers SORCER and the algorithms, Part 2 presents results for aircraft panel design with curvilinear stiffeners.

• Advances in aircraft and spacecraft science
• /
• v.4 no.3
• /
• pp.317-334
• /
• 2017

With rapid growth in the complexity of large scale engineering systems, the application of multidisciplinary analysis and design optimization (MDO) in the engineering design process has garnered much attention. MDO addresses the challenge of integrating several different disciplines into the design process. Primary challenges of MDO include computational expense and poor scalability. The introduction of a distributed, collaborative computational environment results in better utilization of available computational resources, reducing the time to solution, and enhancing scalability. SORCER, a Java-based network-centric computing platform, enables analyses and design studies in a distributed collaborative computing environment. Two different optimization algorithms widely used in multidisciplinary engineering design-VTDIRECT95 and QNSTOP-are implemented on a SORCER grid. VTDIRECT95, a Fortran 95 implementation of D. R. Jones' algorithm DIRECT, is a highly parallelizable derivative-free deterministic global optimization algorithm. QNSTOP is a parallel quasi-Newton algorithm for stochastic optimization problems. The purpose of integrating VTDIRECT95 and QNSTOP into the SORCER framework is to provide load balancing among computational resources, resulting in a dynamically scalable process. Further, the federated computing paradigm implemented by SORCER manages distributed services in real time, thereby significantly speeding up the design process. Part 1 covers SORCER and the algorithms, Part 2 presents results for aircraft panel design with curvilinear stiffeners.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.791-792
• /
• 2007

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1073-1080
• /
• 2008

A GPS receiver platform has been developed to design an interference rejection filter and the platform is also able to evaluate performance of those filters. This platform consists of RF/IF part, data acquisition part and PC part. The RF/IF part converts RF signals to IF signals, the data acquisition part transmits the IF signals to PC using USB device. The PC part rejects the interferences with a filter and then it does navigation with GPS software receiver. The RF/IF part and data acquisition part had been validated with signal spectrum, and the PC part had been validated with the navigation results of GPS receiver. Finally, the entire platform including interference rejection filter has been confirmed with the navigation results in case that the GPS signals and interference entered this platform. As a result, the GPS receiver operated well against interference with 45dB JSR.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.