• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.480-494
• /
• 2009

Long term extreme wave data are essential for planning and designing coastal structures. Since the availability of the field data for the waters around Korean peninsula is limited to provide a reliable wave statistics, the wave climate information has been generated by means of long-term wave hindcasting using available meteorological data. KORDI(2005) has proposed extreme wave data at 106 stations off the Korean coast from 1979 to 2003. In this paper, extreme data sets of wave(KORDI, 2005) have been analyzed for best-fitting distribution functions, for which the spread parameter proposed by Goda(2004) is evaluated. The calculated values of the spread parameter are in good agreement with the values based on method of moment for parameter estimation. However, the spread parameter of extreme wave data has a representative value ranging from about 1.0 to 2.8 which is larger than some foreign coastal waters, it is necessary to review deep water design wave.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.591-595
• /
• 2010

Conventional methods of model evaluation usually rely only on model performance based on a comparison of simulated variables to corresponding observations. However, this type of model evaluation has been criticized because of its insufficient consideration of the various uncertainty sources involved in modeling processes. This study aims to propose an extended model evaluation method using multiple assesment indices (MAIs) that consider not only the model performance but also the model structure and parameter uncertainties in rainfall-runoff modeling. A simple reservoir model (SFM) and distributed kinematic wave models (KWMSS1 and KWMSS2 using topography from 250m, 500m, and 1km digital elevation models) were developed and assessed by three MAIs for model performance, model structural stability, and parameter identifiability. All the models provided acceptable performance in terms of a global response, but the simpler SFM and KWMSS1 could not accurately represent the local behaviors of hydrographs. In addition, SFM and KWMSS1 were structurally unstable; their performance was sensitive to the applied objective functions. On the other hand, the most sophisticated model, KWMSS2, performed well, satisfying both global and local behaviors. KMSS2 also showed good structural stability, reproducing hydrographs regardless of the applied objective functions; however, superior parameter identifiability was not guaranteed. Numerous parameter sets could lead to indistinguishable hydrographs. This result supports that while making a model complex increases its performance accuracy and reduces its structural uncertainty, the model is likely to suffer from parameter uncertainty. The proposed model evaluation process can provide an effective guideline for identifying a reliable hydrologic model.

• Structural Engineering and Mechanics
• /
• v.68 no.1
• /
• pp.103-119
• /
• 2018

In the present research, an attempt is made to obtain a semi analytical solution for both nonlinear natural frequency and forced vibration of embedded functionally graded double layered nanoplates with all edges simply supported based on nonlocal strain gradient elasticity theory. The interaction of van der Waals forces between adjacent layers is included. For modeling surrounding elastic medium, the nonlinear Winkler-Pasternak foundation model is employed. The governing partial differential equations have been derived based on the Mindlin plate theory utilizing the von Karman strain-displacement relations. Subsequently, using the Galerkin method, the governing equations sets are reduced to nonlinear ordinary differential equations. The semi analytical solution of the nonlinear natural frequencies using the homotopy analysis method and the exact solution of the nonlinear forced vibration through the Harmonic Balance method are then established. The results show that the length scale parameters give nonlinearity of the hardening type in frequency response curve and the increase in material length scale parameter causes to increase in maximum response amplitude, whereas the increase in nonlocal parameter causes to decrease in maximum response amplitude. Increasing the material length scale parameter increases the width of unstable region in the frequency response curve.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.177-182
• /
• 2003

This study is directed toward determining the number and characteristics of psychologically meaningful perceptual dimensions required for assessing the sound Ouaiity with respect to vehicle interior and/or exterior noises. and toward identifying the acoustical or psychoacoustical bases underlying the perception. By nonmetric MDS and clustring analysis of sound quality data sets on our own, of critical importance are two perceptual dimensions for which subjective verdicts can be interpreted as loudness and sharpness. The perceptual dimensions based upon similarity judgments could be accounted for 48% and 24% of the variance. each of which might be a match for the acoustic parameter "A-weighted maximum pressure level"(r= .85) and for the psychoacoustic parameter "sharpness" (r= .65), respectively. On the other hand, the perceptual dimensions based upon preference ratings could explain 66% and 10% of the variance. where the acoustic parameter "A-weighted maximum pressure leve"(r= .92) might be taken to be a best predictor, but sharpness appeared to be less suitable for the description of Preference behavior. Linked to the results, the problems of quantitative modelling of subjective sound quality evaluation and also of implementing corresponding cognitive combination rule for technical and industrial applications, say having "winner-sound qualify" according to preference criteria will be shortly in discussion.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.195-203
• /
• 2020

Selective laser melting(SLM) is one of the powder bed fusion(PBF) processes, which enables quicker production of nearly fully dense metal parts with a complex geometry at a moderate cost. However, the process still lacks knowledge and the experimental evaluation of possible process parameter sets is costly. Thus, this study presents a finite element analysis model of the SLM process to predict the melt pool characteristics. The physical phenomena including the phase transformation and the degree of consolidation are considered in the model with the effective method to model the volume shrinkage and the evaporated material removal. The proposed model is used to predict the melt pool dimensions and validated with the experimental results from single track scanning process of Ti-6Al-4V. The analysis result agrees with the measured data with a reasonable accuracy and the result is then used to evaluated each of the process parameter set.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.511-516
• /
• 1994

Parameter estimation techniques are discussed for the complex frequency analysis of an electromagnetic scatterer. The paper suggests how the Maximum Likelihood estimation technique can be applied for this purpose. Experiments on hypothetical data sets demonstrate that the Maximum Likelihood technique is better than the Pencil of Functions technique. Although there have been several techniques including MLE suggested as tools of the parameter estimation, the proposed method has strong advantages under the noise-contaminated sample data environment because it uses minimal dimension of system matrix that stands totally independent of the length of extracted data set.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.839-849
• /
• 2023

The development of automation technology to reduce human error by minimizing human intervention is accelerating with artificial intelligence and big data processing technology, even in the nuclear field. Among nuclear power plant operation modes, the startup and shutdown operations are still performed manually and thus have the potential for human error. As part of the development of an autonomous operation system for startup operation, this paper proposes an action coordinating strategy to obtain the optimal actions. The lower level of the system consists of operating blocks that are created by analyzing the operation tasks to achieve local goals through soft actor-critic algorithms. However, when multiple agents try to perform conflicting actions, a method is needed to coordinate them, and for this, an action coordination strategy was developed in this work as the upper level of the system. Three quantification methods were compared and evaluated based on the future plant state predicted by plant parameter prediction models using long short-term memory networks. Results confirmed that the optimal action to satisfy the limiting conditions for operation can be selected by coordinating the action sets. It is expected that this methodology can be generalized through future research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.457-467
• /
• 2014

This study is to evaluate the snowmelt impact on dam inflow for the Chungju Dam watershed $6,642.0km^2$ using Terra MODIS (Moderate-Resolution Imaging Spectroradiometer) and Soil and Water Assessment Tool (SWAT). To determine the SWAT snowmelt parameter; snow cover depletion curve (SCDC) the snow depth distribution (SDD) using Terra MODIS was used, the snow depth was spatially interpolated using snowfall data of ground meteorological stations. For 10 sets (2000-2010) data during snowmelt period (November-April), the sno50cov parameter, that is, the 50% coverage at a fraction of SCDC which determines the shape of snow depletion process, showed the values of 0.4 to 0.7. The SWAT model was calibrated with average $R^2$ of 0.54 using the sno50cov of each year. The 10 years average streamflow during snowmelt period was 104.3 mm which covers 12.0% of the annual streamflow.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.325-330
• /
• 2006

Integrating processes are frequently encountered in process industries. Generally they are most commonly associated with level control problems. In this paper, tuning formulae of PID controllers for set-point tracking and load disturbance rejection are presented on integrating processes with time delay. In particular, the controller parameters are determined such that performance criteria(IAE, ISE and ITSE) are minimized. Optimal PID parameter sets are obtained by means of a real-coded genetic algorithm(RCGA) and then tuning rules are addressed using obtained PID parameter sets and another RCGA. The performances of the proposed tuning rules are tested on two processes.

• The Journal of Engineering Geology
• /
• v.32 no.3
• /
• pp.389-399
• /
• 2022

Observations on the influence of the fluid infiltration on the breakdown pressure during laboratory hydraulic fracturing tests, along with an analysis of the applicability of the breakdown pressure prediction for cylindrical samples using Quasi-static and Linear Elastic Fracture Mechanics approaches were carried out. These approaches consider fluid infiltration through the so-called radius of fluid infiltration or crack radius, a parameter that is not a material property. Two sets of tests under pressurization rate controlled and injection rate controlled tests were used to evaluate the applicability of these methods. The difficulty of the estimation of the radius of fluid infiltration was solved by back calculating this parameter from an initial set of tests, and later, the obtained relationships were used to predict breakdown pressures for a second set of tests. The results showed better predictions for the injection rate than for the pressurization rate tests, with average errors of 3.4% and 18.6%, respectively. The larger error was attributed to differences in the testing conditions for the pressurization rate tests, which had different applied vertical pressures. On the other hand, for the tests carried out under constant injection rate, the Linear Elastic Fracture Mechanics solution reported lower errors compared to the Quasi-static solution, with values of 3% and 3.8%, respectively. Moreover, a sensitivity analysis illustrated the influence of the radius of fluid penetration or crack radius and the tensile strength on the breakdown pressure, suggesting a need for a careful estimation of these values. Then, the calculation of breakdown pressure considering fluid infiltration in cylindrical samples under triaxial conditions is possible, although larger data sets are desirable to validate and derive better relations.