• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권3호
• /
• pp.153-160
• /
• 2008

A size-biased Poisson distribution is defined. Its characterization by using a recurrence relation for first order negative moment of the distribution is obtained. Different estimation methods for the parameter of the model are also discussed. R-Software has been used for making a comparison among the three different estimation methods.

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2011년도 춘계학술발표회
• /
• pp.252-253
• /
• 2011

• 대한의용생체공학회:의공학회지
• /
• 제7권1호
• /
• pp.41-44
• /
• 1986

The objective of tissue characterization is to provide quantitative information about the physical state of tissue interrogated by an ultrasound beam. In the computer simulation, it was found that the echoes were composed of the interferences of the ultrasonic waves reflected from both sides of the thin object, and could be separated by the spectral correlation method. Also, the phantom study demonstrates that thickness of the thin acryl layer beyond the resolution of common ultrasonic imaging systems can be measured- using this method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2300-2302
• /
• 2005

Metal-Semiconductor-Metal type photodetector was fabricated with AlGaAs/InGaAs Quantum Well FET structures using simplified processing steps. The DC and RF responses were measured by 850nm wavelength injection laser. A DC responsivity in the quasisaturated regime was 0.45 A/W in CW measurements, and a bandwidth measured using a 850nm 40 ps pulsed laser was 16GHz. An electrical equivalent circuit model was extracted from measured S-parameter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.103-104
• /
• 2015

Solar energy has proven to be a potential clean energy source to help offset the large consumption of fossil. Nowadays, many research projects aim to enhance photovoltaic (PV) system performance and functionality. This research focuses on integrating self-monitor capability into dc-dc converters that control PV panels to detect a fault in series-connected PV cells, called hot spotting. A detection method using ac parameter characterization is proposed and its operation is examined through simulation.

• 대한수학회지
• /
• 제59권3호
• /
• pp.469-494
• /
• 2022

In this paper, we study the boundedness of a class of inhomogeneous Journé's product singular integral operators on the inhomogeneous product Lipschitz spaces. The consideration of such inhomogeneous Journé's product singular integral operators is motivated by the study of the multi-parameter pseudo-differential operators. The key idea used here is to develop the Littlewood-Paley theory for the inhomogeneous product spaces which includes the characterization of a special inhomogeneous product Besov space and a density argument for the inhomogeneous product Lipschitz spaces in the weak sense.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.491-498
• /
• 2012

A Ground Based Augmentation System (GBAS) is an enabling technology for an aircraft's precision approach based on a Global Navigation Satellite System (GNSS). However, GBAS is vulnerable to interference, so effective GNSS interference detection and mitigation methods need to be employed. In this paper, an intentional GNSS interference detection and characterization algorithm is proposed. The algorithm uses Automatic Gain Control (AGC) gain and adaptive notch filter parameters to classify types of incoming interference and to characterize them. The AGC gain and adaptive lattice IIR notch filter parameter values in GNSS receivers are examined according to interference types and power levels. Based on those data, the interference detection and characterization algorithm is developed and Monte Carlo simulations are carried out for performance analysis of the proposed method. Here, the proposed algorithm is used to detect and characterize single-tone continuous wave interference, swept continuous wave interference, and band-limited white Gaussian noise. The algorithm can be used for GNSS interference monitoring in an excessive Radio Frequency Interference environment which causes loss of receiver tracking. This interference detection and characterization algorithm will be used to enhance the interference mitigation algorithm.

• 한국식품조리과학회지
• /
• 제4권1호
• /
• pp.17-26
• /
• 1988

The polysaccharide produced by pseudomonas elodea, Gellan gum, was rheologically characterized, compared with agar. Rheological properties were determined from the change in the value of intrinsic viscosity with the pH and salt concentration. At the range of pH 2∼ll and salt 0∼0.16M KC1, the intrinsic viscosity of Gellan gum ranged from 8.8 to 21.2dl/g and agar ranged from 1.97 to 11.46d1/g. In the absence of salt, the intrinsic viscosity of Gellan gum increased as the pH of solution increased up to neutral pH then decreased slightly at alkaline pH, whearas the intrinsic viscosity of agar increased as the pH of solution increased up to pH 9 then decreased slightly. Intrinsic viscosity of Gellan gum and agar decreased with an increase in salt concentration. The chain stiffness parameter for the Gellan gum was 0.033. The overlap parameter of Gellan gum and agar were 0.047g/dl and 0.087g/dl, respectively. Gellan gum and agar were shear rate dependent or pseudoplastic. The yield stress and proportionality constant of Gellan gum increased slightly as the concentration increase, on the other hand, the shear index of Gellan gum showed a maximum at 0.75g/dl and gradually decreased as the concentration increase. The apparent viscosity of Gellan gum and agar decreased as the temperature increase. A lower concentration of the divalent cations calcium and magnesium is required to obtain maximum gel strength than for the monovalent cations sodium and potassium.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.229-238
• /
• 2002

본 연구에서는 절리면 거칠기를 정량적으로 산출하기 위하여 표면 거칠기 계수, Rs를 이용한 측정방법을 제안하고, 이를 바탕으로 절리면 거칠기가 절리면 전단강도에 미치는 영향을 제시하였다. 제시된 Rs를 이용하여 새로운 절리면 전단강도 모델을 제안하였다. 연구 결과, 표면 거칠기 계수인 Rs는 암반의 절리면 거칠기를 정량적으로 표현할 수 있는 유용한 방법이 될 수 있음을 알 수 있었다. Rs에 의한 암코아 규모의 절리면 거칠기 측정에는 최대 측정간격으로 2mm, 최소 측정 길이로 5cm가 적당하나, 이를 대규모의 현장 절리면에 확대 적용하기 위해서는 변동규모(scale of fluctuation), $\delta_u$를 도입하여야 한다. 절리면 거칠기가 작은 경우, 전단강도는 절리면에서의 미끄러짐으로 유발되었으나, 거친 절리면에서의 전단강도는 거칠기의 일부분이 파괴됨으로 인하여 발생됨을 알 수 있었다.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.445-452
• /
• 2022

We developed an adaptive optics test bench using an optical simulator and two rotating phase plates that mimicked the atmospheric turbulence at Bohyunsan Observatory. The observatory was reported to have a Fried parameter with a mean value of 85 mm and standard deviation of 13 mm, often expressed as 85 ± 13 mm. First, we fabricated several phase plates to generate realistic atmospheric-like turbulence. Then, we selected a pair from among the fabricated phase plates to emulate the atmospheric turbulence at the site. The result was 83 ± 11 mm. To address dynamic behavior, we emulated the atmospheric disturbance produced by a wind flow of 8.3 m/s by controlling the rotational speed of the phase plates. Finally, we investigated how closely the atmospheric disturbance simulation emulated reality with an investigation of the measurements on the optical table. The verification confirmed that the simulator showed a Fried parameter of 87 ± 15 mm as designed, but a little slower wind velocity (7.5 ± 2.5 m/s) than expected. This was because of the nonlinear motion of the phase plates. In conclusion, we successfully mimicked the atmospheric disturbance of Bohyunsan Observatory with an error of less than 10% in terms of Fried parameter and wind velocity.