• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.183-185
• /
• 2002

This paper proposes the test method for the testing of a RLC parallel circuit on the electronic circuit board. This method utilizes a guarding circuit and a phase detection circuit. The guarding circuit separates electrically the tested device or circuit from printed circuit board. Phase detector estimates the phase difference from two signals, voltage and current. This method computes R. L and C value from phase difference($\theta$) and impedance value(Z) obtained by enforcing two other frequence stimulus under the guarding state.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.499-506
• /
• 2003

The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative subcycles. In analyzing or optimizing such a coupled system, it is essential to determine the best order of the processes within these subcycles to reduce design cycle time and cost. This is accomplished by decomposing large multidisciplinary problems into several sub design structure matrices (DSMs) and processing them in parallel This paper proposes a new method for parallel decomposition of multidisciplinary problems to improve design efficiency by using the multi-objective genetic algorithm and two sample test cases are presented to show the effect of the suggested decomposition method.

• 한국경영과학회지
• /
• 제25권2호
• /
• pp.47-57
• /
• 2000

In this paper we consider an n-job non-preemptive and identical parallel machine scheduling problem of minimizing the sum of earliness and tardiness with different release times and due dates. In the real world this problem is more realistic than the problems that release times equal to zero or due dates are common. The problem is proved to be NP-complete. Thus a heuristic is developed to solve this problem To illustrate its suitability a proposed heuristic is compared with a genetic algorithm for a large number of randomly generated test problems. Computational results show the effectiveness and efficiency of proposed heuristic. In summary the proposed heuristic provides good solutions than genetic algorithm when the problem size is large.

• 한국통신학회논문지
• /
• 제15권7호
• /
• pp.628-637
• /
• 1990

본 연구에서는 고속의 병렬 알고리즘을 이용하여 실시간 디지털 신호를 처리할 수 있는 16x16 고속의 CMOS 승산기를 설계하였다. 설계된 병렬 승산기는 modified Booth's 알고리즘과 Ling's approach를 이용하여 4열의 가산기와 8개의 Booth 디코더로 구성하였으며, 2's complement의 데이터와 계수를 처리할 수 있도록 설계하였다. 또한 VLSI 구현에 적합하도록 modulrity하고 regularity하게 모든 회로를 설계하고 규칙적으로 내부 배열을하여 testavility가 용이하도록 설계하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.46-57
• /
• 2006

To estimate nondestructively strength performances of laminated woods, 3-ply parallel- and cross-laminated wood specimens exposed under atmosphere conditions after bending creep test were prepared for this study. The effects of density of species, arrangement of laminae and lamination types on dynamic MOE obtained by flexural vibration were investigated, and regression analyses were conducted in order to estimate static bending strength and bending creep performances. Dynamic MOE of parallel-laminated woods showed 1.0~1.2 times higher values than static bending MOE, and those of cross-laminated woods showed 1.0~1.4 times higher values than static bending MOE. The degree of anisotropy of dynamic MOE perpendicular to the grain of face laminae versus that parallel to the grain of face laminae was markedly decreased by cross-laminating. There were strong correlations between dynamic MOE by flexural vibration and static bending MOE (correlation coefficient r = 0.919~0.972) or bending MOR (correlation coefficient r = 0.811~0.947) of 3-ply laminated woods, and the correlation coefficient were higher in parallel-laminated woods than in cross-laminated woods. It indicated that static bending strength performances were able to be estimated from dynamic MOE by flexural vibration. Also, close correlations between the reciprocal of dynamic MOE by flexural vibration and initial compliance at 0.008 h of 3-ply laminated woods were found (correlation coefficient r = 0.873~0.991). However, the correlation coefficient between the reciprocal of dynamic MOE and creep compliance at 168 h of 3-ply laminated woods was considerably lower than those between dynamic MOE and initial compliance, and it was hard to estimate creep compliance with a high accuracy from dynamic MOE due to the variation of creep deformation.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.487-496
• /
• 2005

Chlorine bulk decay tests were carried out by bottle test under controlled conditions in a laboratory. Experiments were performed at different temperatures: $5^{\circ}C$, $15^{\circ}C$, $25^{\circ}C$, and the water temperatures when samples were taken from the effluent just before entering to its distribution system. 38 bulk tests were performed for water of Al (water treatment plant), 4 bulk tests for A2 (large service reservoir), and A3(pumping station). Residual chlorine concentrations in the amber bottles were measured over time till about 100 hours and bulk decay coefficients were evaluated by assuming first-order, parallel first-order, second-order. and $n^{th}-order$ reaction. The $n^{th}-order$ coefficients were obtained using Fourth-order Runge-Kutta Method. A good-fit by the average coefficient of determination ($R^2$) was first-order ($R^2=0.90$) < parallel first-order ($R^2{_{fast}}=0.92$, $R^2{_{slow}}=0.95$) < second-order ($R^2=0.95$) < $n^{th}-order$ ($R^2=0.99$). But if fast reaction of parallel first-order bulk decay were applied to the effluent of large service reservoir with ca. 20 hours of travel time and slow reaction in the water distribution system following the first 20 hours, parallel first-order bulk decay would be best and easy for application of water quality modeling technique.

• 한국전산구조공학회논문집
• /
• 제23권5호
• /
• pp.475-482
• /
• 2010

본 논문에서는 대규모 자유도 시스템의 병렬처리를 위하여 2단계로 이루어진 영역분할법(Domain Decomposition Method) 기반의 병렬 알고리즘을 제안하였다. 분할된 영역의 내부 및 외부 경계를 상위영역문제로 정의하고 국부영역문제는 변위 경계조건이 모두 주어지는 분할영역에서의 Dirichlet 문제로 구성한다. 상위영역에서는 전체 상위영역에 대한 강성 행렬의 어셈블이 필요없는 반복법을 통하여 변위를 구하고, 이를 바탕으로 국부영역에서 Multi-Frontal Sparse Solver (MFSS)를 이용하여 변위를 계산한다. 상위영역문제의 연산에서 프로세서 간의 데이터 교환을 최소화하여 계산효율을 유지하며, 동시에 해석 가능한 자유도를 증대시키는 병렬 PCG(Preconditioned Conjugate Gradient)법 기반의 알고리즘을 개발하였다. 제안된 알고리즘을 적용하여 수치해석을 수행한 결과, 프로세서 수가 증가할수록 계산성능의 손실없이 해석 가능한 자유도가 비례하여 증가하는 선형 확장성을 관찰할 수 있었으며, 대규모 자유도 문제에 효과적으로 사용 가능함을 확인하였다.

• 전력전자학회논문지
• /
• 제12권5호
• /
• pp.400-408
• /
• 2007

본 논문에서의 병렬제어를 이용한 8kW급 대용량 영전압/영전류 풀 브릿지 DC-DC 컨버터의 개발 결과를 보인다. 본 논문에서는 효율적인 시스템 구성을 위해 4-병렬 단위 모듈 운전을 제안한다. 각 단위모듈은 위상 천이 풀 브릿지를 채택하고, ZVZCS 운전을 위해 간단한 보조 회로를 2차측에 추가하였다. ZCS를 위한 보조 회로 동작 로직은 환류 모드 구간에서 1차측 전류를 제거하도록 구현하였다. 또한 병렬 운전시의 출력 전류의 균등 제어를 위해 위상천이로직을 활용한 Charge Control 방식을 적용하였다. 전압 제어기는 DSP TMS320LF2406을 활용하여 4 모듈의 출력전류 및 출력전압을 A/D로 입력받아 구현하였다. 개발된 컨버터는 차량에 설치되는 고속 발전기용 전력 변환기에 장착되었으며, 구축된 모니터링 시스템으로 고속 발전기의 실제 운전 조건에서 데이터를 획득하여, 분석을 통해 그 성능을 입증하였다.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.237-246
• /
• 1994

Experimental data are reported for charging and collection of NaCl aerosols in the 0.03- to $0.2{\mu}m$-geometric-mean-diameter range in 2-stage parallel-plate electrostatic precipitators. The NaCl aerosols are generated with geometric standard deviation of about 1.74 and particle generation rate of about 10^9 particles/see by the constant output atomizer and injected into the air flow in the clean wind-tunnel. The 2-stage parallel-plate electrostatic precipitator installed in the test section of the wind-tunnel is operated with a positive corona discharge. The NaCl aerosols in the channel flow are sampled and transported to the aerosol particle number concentration measurement system by using the isoaxial sampling and transport system constructed based on the Okazaki and Willeke design. The aerosol particle number concentration measurement system measures the size distribution of submicrometer aerosols by an electrical mobility detection technique. It is confirmed from comparing the measured collection efficiencies in this study and the predicted ones by our previous theoretical analysis that the predicted collection efficiencies agree well with the experimental ones. It is also found from the comparison that below about $0.02{\mu}m$ all particles are not charged and the uncharged particles are not collected, and consequently 2-stage parallel-plate electrostatic precipitators are not suitable for that particle size range.

• 정보처리학회논문지A
• /
• 제10A권2호
• /
• pp.137-140
• /
• 2003

최근에 CG 반복법을 이용하여 레이레이 계수를 최소화함으로써 대칭행렬의 내부고유치를 구하는 방법이 개발되었다 그리고 이 방법은 병렬계산에 매우 적합하다. 적절한 준비행렬의 선택은 수렴속도를 향상시킨다. 우리는 본 연구에서 이를 위한 병렬준비행렬들을 비교한다. 고려된 준비행렬들은 Point-SSOR, 다중색채하의 ILU(0)와 Block SSOR이다. 우리는 128개의 노드를 가진 CRAY-T3E에서 구현하였다. 프로세서간의 통신은 MPI 리이브러리를 사용하였다. 최고 512$\times$512 행렬까지 시험하였는데 이 행렬들은 타원형 편미분방정식의 근사화에서 얻어졌다. 그 결과 다중색채 Block SSOR이 가장 성능이 우수한 것으로 판명되었다.