• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.33-41
• /
• 2018

This paper describes a new test rig for identification of rotordynamic force coefficients of squeeze film dampers (SFDs) in automotive turbochargers (TCs). Prior studies have mainly concentrated on relatively large-sized SFDs used in aircraft engines, turbocompressors, and turbopumps. The main objective of the current study is to propose a test rig for identification of dynamic force coefficients of small-sized SFDs (a journal diameter of ~11 mm). The current test rig consists of a journal, a SFD cartridge, four support rods, an upper structure, a data acquisition (DAQ) system, and an oil circulation unit. The annular gaps between the journal outer surface and SFD cartridge inner surface create SFD film lands. The damper has two parallel film lands separated by a central groove, having an axial length and depth of 3 mm. Each film land has a length of 4 mm with a $40{\mu}m$ radial clearance. The static load and dynamic impact tests identify the structural characteristics (i.e., stiffness and natural frequency) of the journal and assembled test rig. The measurements show good agreement with predictions. The SFD performance data from this test rig will be used to develop innovative TC rotor systems with improved NVH and reliability characteristics incorporating advanced SFD technology.

• 한국해안해양공학회지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2000

해수유동 모델과 부영양화 모델로 구성된 3차원 생태계 모델을 수립하여 진해만에 적용하였으며, 해수유동 모델과 부영양화 모델은 동일한 격자상에서 운영된다. 수치계산결과를 관측경과와 비교하였으며, 그 결과 비교적 잘 일치하였다. 계산된 COD, DIN 및 DIP의 농도는 오폐수의 과다유입과 식물성 플랑크톤의 생산에 의해 진해만의 북부 지역(마산만)에서 높게 나타났다. 저층에서 저산소 및 무산소 수괴는 오폐수의 유입량이 많고 성층이 강하게 형성되는 진해만의 북부해역과 성층형성과 양식장이 밀집되어 있는 진해만의 서부 내만에서 발생하고 있다. DO 농도의 등분포선은 만 입구로부터 DO 공급과 물리적 작용에 의해 만 입구에서 만 내로 DO의 수송으로 인해 만의 입구와 평행하게 나타났다. 저층 저산소 수괴의 형성에 물리적, 생화학적 과정이 대단히 중요한 역할을 하며, 이 중에서 해수의 수평적·연직적 확산에 의한 물리적 작용이 제일 중요한 요소인 것으로 판단된다.

• 대한세포병리학회지
• /
• 제13권1호
• /
• pp.8-13
• /
• 2002

This study was designed to compare the performance of liquid-based preparation from the AutoCyte PREP with the conventional cervicovaginal smear in masked split-samples. In randomly selected 840 cases, the conventional smear was always prepared first, and the AutoCyte PREP used the resldual cells on the collecting device. Parallel AutoCyte PREP slides and matched conventional smears were screened in a blind fashion. All abnormals and 10% random normal cases were reviewed by two pathologists in a blind fashion. The Bethesda System was used for reporting the diagnosis and specimen adequacy. The diagnoses from the two methods were agreed exactly in 767(91.3%) of 840 cases. The AutoCyte PREP demonstrated a 25% overall improvement in the detection of squamous intraepithelial lesion(SIL). The ratio of ASCUS to SIL was decreased as 0.45 compared with 1.00 of conventional smear. The AutoCyte PREP produced excellent cellular preservation and superior sensitivity for detection of atypical cells as compared to the conventional smear. It makes us to be able to subclassify ASCUS into from WNL to HSIL. We thought that the AutoCyte PREP method might contribute to increase the detection rate of abnormal cells than conventional methods.

• 정보과학회 논문지
• /
• 제43권2호
• /
• pp.256-268
• /
• 2016

이기종의 다양한 장비로 구성된 현대의 네트워크는 분산 설치되어 있고, 이를 중앙 집중적이면서 효율적으로 관리하기 위해서 NETCONF 표준이 제정되었다. 본 논문에서는 NETCONF의 각 계층에 대해 개선한 연구를 포함하여 하나의 시스템으로 통합하는 작업을 수행하였다. RPC 계층에서는 멀티스레드를 사용하여 비동기 통신 채널 및 병렬 처리가 가능하도록 하였고, Operation 계층에서는 장비 설정 데이터 간 종속성을 이용한 데이터 그룹을 활용하여 연산의 효율성을 증가시켰다. Operation 계층과 연동할 수 있도록 Content 계층에서의 설정 데이터 모델링 기법에 대해서도 제시하였다. 마지막으로 GUI 프로그램을 구현하고 구현 결과를 나타내었다. 개선된 NETCONF와 표준 NETCONF를 질의 처리율, 질의 처리 속도, CPU 사용률에 대해 비교하는 실험을 수행한 결과 질의 처리율과 처리 속도에서는 개선된 NETCONF가, CPU 사용률에서는 표준 NETCONF가 우수하였다.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.77-88
• /
• 2016

Purpose : The purpose of this study was to explore an effect exerted to non-affected hand and affected hand of patients by performing training of chopsticks and grasp strength that are helpful to dexterity and grasp strength of hand together with training method of joint exercise, muscle strength build-up training, delicate hand function training. Method : By targeting 30 normal adult male/females engaged in K university, Busan for one month on April, 2015, 10 persons of hand function build-up training group, that of dexterity training group and 10 persons of control group were randomly selected. For hand function build-up training group, chopsticks training in parallel with total 20 times of grasp strength training for 4 weeks including 5 minutes of dominant hand grasp strength training, 5 minutes of non-dominant hand grasp strength training, 15 minutes of chopsticks training was performed based on 25 minutes/one time, 5 times a week. Result : First, In a comparison of dexterity of both hands by each group depending on training period, hand function build-up group and dexterity training group were represented to be effective compared with control group. Secondly, In a comparison of manipulatory ability of both hands by each group depending on training period, hand function build-up group and dexterity training group were represented to be effective compared with control group. Conclusion : It is considered that diversified and broad research covering patients with musculoskeletal disease and nervous system-related disease would be performed by securing far more test subjects after comparing a correlation between dexterity training and hand function training.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.9-12
• /
• 2012

Usually, the AC loss from the superconducting element of an SFCL due to the load current is very small because it is composed of the combination of bifilar windings with very small reactance. Although the AC loss is small enough, we should be albe to predict for the design and control of the cryogenic system. In fact, an SFCL for the transmission voltage class may not generate ignorable AC loss because of the inevitable space between the HTS wires for the high voltage insulation and cryogenic efficiency. To measure the AC loss dependency on the space between the 2G HTS wires with the width of 4.4 mm, we prepared an experimental setup which could adjust the distance between the wires. We used two 500-mm length HTS wires in parallel and applied the current in the opposite direction for each wire to simulate a part of a current limiting module for a high voltage SFCL. We also put two couples of voltage taps at the ends of each wire and a cancel coil in the voltage measurement circuit to compensate the reactive component from the voltage taps. In this condition, we varied the distance between the wires to investigate the change of the transport current loss. A similar experimental study with HTS wire with the width of 12 mm is now in progress.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.696-705
• /
• 2007

Statement of problem: In the Protar articulator, the models are almost parallel with the Camper's plane. The ultrasonic-based ARCUSdigma system is basis for the determination of dynamic function parameters with so-called "articulator related registration". Purpose: The purpose of this study was to compare the sagittal condylar guidance angles found by use of the wax protrusive records in a semi-adjustable articulator(KaVo Protar 7) with those found by use of the Axiograph (ARCUSdigma). 83 volunteers with intact dentition participated in this study after obtainment of informed consent. Material and method: The sagittal condylar guidance angles were measured and estimated statistically by semi-articulator and Axiograph. All the readings were in degrees. No control was used in this project. To test whether there was a significant difference between the 2 independent samples, paired t-test and Kruskal-Wallis test were carried out(p=.05). Results: 1. The mean results for the wax protrusive records were as follow: right side (32.65 degrees, SD 16.48); left side (33.27 degrees, SD 17.49). 2. The mean results for the Axiograph were as follow: right side (32.26 degrees, SD 7.00); left side (33.07 degrees, SD 7.58). 3. There was no statistical difference on the wax protrusive records and Axiograph(p>0.05). Conclusion: Both methods of wax protrusive records and Axiograph are clinically acceptable for measuring the sagittal condylar guidance angles in semi-adjustable articulators.

• 한국통신학회논문지
• /
• 제26권11C호
• /
• pp.148-156
• /
• 2001

본 논문에서는 RISC 마이크로프로세서에 DSP프로세서를 추가하여 멀티미디어 기능이 강화된 응용에 알맞은 마이크로프로세서(YS-RDSP)를 제안한다. YS-RDSP는 최대 4개의 명령어를 동시에 병렬로 처리할 수 있다. 프로그램의 크기를 줄이기 위해 YS-RDSP는 16비트와 32비트의 두 가지 명령어 길이를 지원한다. YS-RDSP는 칩 하나로 RISC마이크로프로세서의 programmability 및 제어능력에 DSP의 처리능력을 제공하기 위하여 8-KByte ROM과 8-KByte RAM을 내장하고 있다. 칩 내에 있는 주변장치중 하나인 시스템 컨트롤러는 저전압 동작을 위한 3가지의 전압강하모드를 지원하며 SLEEP명령어는 CPU코어와 주변장치의 동작상태를 변환시킨다. YS-RDSP프로세서는 Verilog-HDL를 이용하여 하향식설계방식으로 구현되었고 C-언어로 작성된 사이클 단위 시뮬레이터를 이용하여 개선되고 검증되었다. 검증된 모델은 0.6um, 3.3V CMOS 표준 셀 라이브러리로 합성되었으며 자동화 P&R에 의해 10.7mm8.4mm코어 면적을 갖도록 레이아웃 되었다.

• 대한치과의사협회지
• /
• 제22권7호통권182호
• /
• pp.621-633
• /
• 1984

Kinesiograph로부터 얻어지는 자료의 선형범위를 확장하고자 하는 연구가 비철, 비자석성의 기구를 사용하여 수행되었다. 자석을 5mm의 일정한 간격으로 자석감지장치가 달린 구조물에 팽팽하게 세평면(frontal, horizontal, sogittal plam)을 통해 3cm×4cm×5cm의 입체공간내에서 693개의 움직여서 만들어지는 자료점으로 항렬 (matrix)을 얻었다. 각각의 자료점에 있어서 Kinesiograph로부터 얻어진 관찰된 값과 움직인 실제값이 상관지어졌다. 따라서 관찰된 값의 세 상관계수를 알게되면 실제값인 세 계수를 얻을수 있게 됐다. 이 업무를 수행하기 위해서 컴퓨터 프로그램이 Fortran을 이용해서 특별히 쓰여졌다. 각 자료점이 5mm 서로 떨어져 있으므로 연구된 입체공간에는 각각 8개의 자료점을 가진 480개의 입방체가 존재한다. 따라서 각각 자료점간에 더 작은 간극을 마련할 수 있다면 보다 더 정밀한 계측이 가능 할 것이다. 결론으로 컴퓨터의 도움으로 기능적 하악운동의 전체범위에 걸친 절대계측들 가능케 하는 이론적 모형이 제시되었다.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.69-74
• /
• 2015

Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.