• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.32-38
• /
• 2007

In this study, a new algorithm for measuring the velocity and distance from a camera to a moving object by using pseudo-stereo images obtained from a single camera with a stereo adapter is proposed. The proposed system is similar to a parallel visual stereo system using a two-camera system, but because this system can obtain pseudo-stereo images form a single camera, it has advantages not only in the aspect of cost but also in stereo conformity by arrangement and the calibration of the left and right stereo cameras upon image processing.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.90-95
• /
• 2000

This paper presents the vergence control of a parallel stereo camera and its application to underwater stereo camera to enhance the working efficiency of underwater vehicles that equips with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get a clear stereo vision with the camera for all the range of objects in air and in water, especially in short range objects. The control system of the camera is so simple that we are able to realize a small stereo camera system and to apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain the three-dimensional images and the distance information in real-time.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.79-84
• /
• 2001

This paper present the control of the image disparity of a parallel stereo camera and its application to an underwater stereo camera to enhance the working efficiency of underwater vehicles that are equiped with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get clear stereo vision with the camera for all the range of objects in air and in water, especially in short range object. The control system of the camera is so simple that we are able to realize a small stereo camera system and apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain three-dimensional images and distance information in real-time.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.137-145
• /
• 2004

In this paper, a new algorithm for the segmentation of the multi moving objects at the 3 dimension space and the method of measuring the distance from the camera to the moving object by using stereo video monitoring system is proposed. It get the input image of left and right from the stereo video monitoring system, and the area of the multi moving objects segmented by using adaptive threshold and PRA(pixel recursive algorithm). Each of the object segmented by window mask, then each coordinate value and stereo disparity of the multi moving objects obtained from the window masks. The distance of the multi moving objects can be calculated by this disparity, the feature of the stereo vision system and the trigonometric function. From the experimental results, the error rate of a distance measurement be existed within 7.28％, therefore, in case of implementation the proposed algorithm, the stereo security system, the automatic moving robot system and the stereo remote control system will be applied practical application.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.45-53
• /
• 2006

This paper proposes a method for an effective intelligent route decision for automatic moving robots(AMR) using a 2D spatial map of a stereo camera system. In this method, information about depth and disparity map are detected in the inputting images of a parallel stereo camera. The distance between the automatic moving robot and the obstacle is detected, and a 2D spatial map is obtained from the location coordinates. Then the relative distances between the obstacle and other objects are deduced. The robot move automatically by effective and intelligent route decision using the obtained 2D spatial map. From experiments on robot driving with 240 frames of stereo images, it was found that the error ratio of the calculated distance to the measured distance between objects was very low, 1.52[%] on average.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1637-1644
• /
• 2003

Stereoscopic particle image velocimetry is a measurement technique to acquire three dimensional velocity field by two cameras. With a laser sheet illumination, the third velocity component can be deduced from out-of$.$plane velocity components using a stereoscopic matching method. Most industrial fluid flows are three dimensional turbulent flows, so it is necessary to use the stereoscopic PIV measurement method. However the existing stereoscopic PIV system seems hard to use since it is very expensive and complex. In this study we have developed a Miniature Stereo-PIV(MSPIV) system based on the concept of the Miniature PIV system which we have already developed. In this paper, we address the design and some primitive experimental results of the Miniature Stereo-PIV system. The Miniature Stereo-PIV system features relatively modest performances, but is considerably smaller, cheaper and easy to handle. The proposed Miniature Stereo-PIV system uses two one-chip-only CMOS cameras with digital output. Only two other chips are needed, one for a buffer memory and one for an interfacing logic that controls the system. Images are transferred to a personal computer (PC) via its standard parallel port. No extra hardware is required (in particular, no frame grabber board is needed).

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.272-280
• /
• 2002

In this paper, we present a method to extract a moving object and to measure the distance to it by using the stereo vision system. The moving factor is to be extracted through a match of a pixel unit for the moving object where the adaptive threshold is effectively dealt with to remove changes in the brightness of the image. The distance to moving object is measured by using a stereo vision system which employs a parallel camera. The experimental results show that the proposed algorithm could be effectively applied to distance measurement to moving object because it has an average error of one percent.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.965-973
• /
• 2019

In this paper, Stereo 4K@60fps 360 VR real-time video capture system which consists of video stream capture, video encoding and stitching module is been designed. The system captures stereo 4K@60fps 360 VR video by stitching 6 of 2K@60fps stream which are captured through HDMI interface from 6 cameras in real-time. In video capture phase, video is captured from each camera using multi-thread in real-time. In video encoding phase, raw frame memory transmission and parallel encoding are used to reduce the resource usage in data transmission between video capture and video stitching modules. In video stitching phase, Real-time stitching is secured by stitching calibration preprocessing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.371-382
• /
• 2002

A camera model with optical axes parallel has been widely used for stereo vision applications. A pair of input ages are obtained from a convergent-looking stereo camera model based on the human visual system in this per, and each image is divided into quadrant regions with respect to the fixation point. The reasoning of quadrant partitions is based on the human visual system and is proven by a geometrical method. Image patches : constructed from the right and left stereo images. A modified cepstrum filter is applied to the patches and disparity vectors are determined by peak detection algorithm. The three-dimensional information for synthetic ages is obtained from the measured disparity and the convergent stereo camera model. It is shown that the experimental results of the proposed method for various stereo images are accurate around the fixation point like the human visual system.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.54-57
• /
• 2016

In this paper, the method for an effective and intelligent route decision of the automatic ground vehicle (AGV) using a 2D spatial map of the stereo camera system is proposed. The depth information and disparity map are detected in the inputting images of a parallel stereo camera. The distance between the automatic moving robot and the obstacle detected and the 2D spatial map obtained from the location coordinates, and then the relative distance between the obstacle and the other objects obtained from them. The AGV moves automatically by effective and intelligent route decision using the obtained 2D spatial map. From some experiments on robot driving with 480 frames of the stereo images, it is analyzed that error ratio between the calculated and measured values of the distance between the objects is found to be very low value of 1.57% on average, respectably.