• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.423-435
• /
• 2022

Ground vibration generated repeatedly in blasting tunnel excavation sites is known to be one of the major hazards induced by blasting operations. Various studies have been conducted to minimize these hazards, both theoretical and empirical methods using electronic detonator, the deck charge method, the center-cut method among others Among these various existing methods for controlling the ground vibration, in this study, we investigated the cut method. In particular, we analyzed and compared the V-cut method, which is commonly used in tunnel blasting, to the double-drilled parallel method, which has recently been introduced in tunnel excavation site. To understand the rock fragmentation efficiency as well as the ground vibration controllability of the two methods, we performed in-situ field blasting tests with both cut methods at a tunnel excavation site. Additionally, numerical analysis by FLAC3D has been executed for a better understanding of fracture propagation pattern and ground vibration generation by each cut method. Ground vibration levels, by PPVs measured in field blasting tests and PPVs estimated in numerical simulations, showed a lower value in the double-drilled parallel compared with the V-cut method, although the exact values are quite different in field measurement and numerical estimation.

• 한국통신학회논문지
• /
• 제34권10A호
• /
• pp.776-783
• /
• 2009

본 논문에서는 OFDM과 같은 대용량 무선 전송방식의 베이스밴드단(Baseband) 신호처리 방식 중 직병렬/병직렬 변환기(Serial-to-Parallel/Parallel-to-Serial Converter)를 전류모드(Current-mode) 회로로 구현했을 경우 유효한 설계 기법을 제안한다. 전류모드를 이용한 OFDM(Orthogonal Frequency Division Multiplexing: 직교주파수분할다중)용 아날로그 프리에 변환(FFT) LSI의 병렬 입출력을 담당하는 전류모드 직병렬병직렬 변환기의 홀드모드(Hold mode)의 불필요한 전류를 제거할 수 있다. 이를 통해 전류모드로 구성한 아날로그 신호처리 시스템의 저소비전력을 실현하기 위해 필수적인 새로운 전류모드 직병렬/병직렬 변환기를 제시하고 설계된 칩의 측정결과가 시뮬레이션 결과와 일치하는 것을 확인하였다. 이를 통해 저전력형 대용량 무선통신 시스템의 베이스밴드단 구축이 가능한 전류모드 아날로그 시스템의 구현 가능성을 제시하였다.

• Journal of electromagnetic engineering and science
• /
• 제12권2호
• /
• pp.171-175
• /
• 2012

In this work, a new microstrip-to-substrate integrated waveguide (SIW) transition using the parallel half-mode substrate integrated waveguide (HMSIW) is proposed. The proposed transition consists of three sections : a microstrip, parallel HMSIWs, and an SIW. By inserting the parallel HMSIWs section between the microstrip section and the SIW section, the proposed transition can improve the return loss characteristics of the near cut-off frequency because the HMSIWs section has a lower cut-off frequency than the SIW section (8.6 GHz). The lower cut-off frequency is achieved through gradual electromagnetic field mode changes for a low reflection. The measured return loss is less than 20 dB in the of 9.1~16.28 GHz freqeuncy range for the back-to-back transition. The measured insertion loss is within 1.6 dB for the back-to-back transition. The proposed transition is expected to play an important role in wideband SIW circuits fed by a microstrip.

• 터널과지하공간
• /
• 제11권3호
• /
• pp.248-256
• /
• 2001

실린더 컷은 터널 굴착단면의 크기에 관계없이 널리 이용된다. 본 연구에서는 발파당 굴진장을 중대시키기 위하여 종래의 방법과 다른 새로운 방법을 제안하였다. 이 방법의 새로운 패턴은 그림과 같으며, 각 단계별로 상세한 저항선, 공간간격은 별도 그림과 같다. 새로운 실린더 컷 방법과 종래의 방법과의 결과는 다음과 같다. 종래 방법은 굴진장이 천공장의 90∼95%인데 비하여 새로운 방법은 대체로 99.5%이다. 비장약량이 1.363kg/㎥에서 1.297로 약 5% 감소되며, 비천공장이 2.393 m/㎥에서 2.130으로 약 8%o감소 된다. 그밖에 지반진동, 비산, 파쇄암의 크기 등이 종래 방법에 비하여 우수함을 확인하였다.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.35-43
• /
• 1996

A computer program for automatic deriving the symbolic equations of motion for robots using the programming language MATHEMATICA has been developed. The program, developed based on the Lagrange formalism, is applicable to the closed chain robots as well as the open chain robots. The closed chains are virtually cut open, and the kinematics and dynamics of the virtual open chain robot are analyzed. The constraints are applied to the virtually cut joints. As a result, the spatial closed chain robot can be considered as a tree structured open chain robot with kinematic constraints. The topology of tree structured open chain robot is described by a FATHER array. The FATHER array of a link indicates the link that is connected in the direction of base link. The constraints are represented by Lagrange multipliers. The parallel robot, DELTA, having three-dimensional closed chains is modeled and simulated to illustrate the approach.

• 한국정보통신학회논문지
• /
• 제5권3호
• /
• pp.533-541
• /
• 2001

본 논문은 플랫트 딜레이 특성의 올패스 필터의 합을 이용한 로우패스 필터를 제시하였다. 이 필터는 병렬 구조의 올패스 필터로 구성하였고, 일반적인 아날로그 필터는 위상과 지연을 조정하는 것이 불가능하지만, 제시한 필터를 이용하면 위상과 지연을 조정하는 것이 용이하다는 장점을 가지고 있다. 그리고 통과대역 폭과 크기 특성, 군지연 특성과 차단 주파수를 비교 분석하였다. 아울러, 원하는 차단 주파수를 얻기 위해서 가중치를 인가하여, 융통성 있는 차단 주파수와 군지연 특성을 얻었다.

• 전기학회논문지P
• /
• 제51권2호
• /
• pp.55-59
• /
• 2002

Parallel processing is able to be used effectively on computationally intense power system problems. But this technology is not still available is not only parallel computer but also parallel processing scheme. Testing these algorithms to ensure accuracy, and evaluation of their performance is also an issue. Although a significant amount of parallel algorithms of power system problem have been developed in last decade, actual testing on parallel computer architectures lies in the beginning stages because no clear cut paths. This paper presents Jacobian modeling method to supply the base being able to treat power flow by newton's method by the computer. This method is to assign and to compute teared blocks of sparse matrix at each parallel processors. The testing to insure accuracy of developed method have been done on serial computer by trying to simulate a parallel environment.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.87-92
• /
• 1996

When cutting 2.0cm-thick red oak and hard maple with an air-jet-assisted carbon-dioxide laser of 2kW output power, maximum feed speed at the point of full penetration of the beam decreased with increasing the angle between grain and cutting direction. Feed speed averaged 3.75 and 3.38 meters per minute for red oak and hard maple, respectively. Gray-level of laser-cut surfaces were analyzed by image analysis system. The highest gray level of laser-cut surface was obtained when red oak was cut parallel to grain by laser. Surface profiler was used to scan the sawn and laser-cut surfaces. Center line average roughnesses of laser-cut surfaces were higher than those of sawn surfaces. Scanning electron micrographs showed the cell walls which were melted by laser.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.27-32
• /
• 2009

A technical system generally comprise a number of subsystems and components that are interconnected in such a way that the system is able to perform a set of required function. Because of the complex system structure with serial, parallel and bridged connections, some certain subsystems or components are more critical than the others. The main concern of a reliability engineer is to identify potential failures and to prevent these failures from occurring. In order to prevent fatal failures, proper inspections and maintenance actions for each component are required Considering above objectives of reliability engineers and characteristics of a practical system, several practical method for evaluating system and component reliabilities have developed namely Birnbaum's and Fussell & Vesely's measures. However there are several critical weaknesses in traditional calculation process as the target system gets larger. In this paper, a new technique for calculating component's structural importance is proposed and compared to Birnbaum's with representative system examples (serial, parallel. k out of n, and bridge type).

• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.135-139
• /
• 2014

Opportunistic routing was originally introduced in various multihop network environments to reduce the number of hops in such a way that, among the relays that decode the transmitted packet for the current hop, the one that is closest to the destination becomes the transmitter for the next hop. Unlike the conventional opportunistic routing case where there is a single active S-D pair, for an ad hoc network in the presence of fading, we investigate the performance of parallel opportunistic multihop routing that is simultaneously performed by many source-destination (S-D) pairs to maximize the opportunistic gain, thereby enabling us to obtain a logarithmic gain. We first analyze a cut-set upper bound on the throughput scaling law of the network. Second, computer simulations are performed to verify the performance of the existing opportunistic routing for finite network conditions and to show trends consistent with the analytical predictions in the scaling law. More specifically, we evaluate both power and delay with respect to the number of active S-D pairs and then, numerically show a net improvement in terms of the power-delay trade-off over the conventional multihop routing that does not consider the randomness of fading.