• 천문학논총
• /
• 제15권spc1호
• /
• pp.119-126
• /
• 2000

The BOES (BOAO Echelle Spectrograph), a fiber-fed echelle spectrograph of the BOAO 1.8 m telescope, has been designed and now is being manufactured. The BOES follows a white pupil design collimated with two off-axis parabolic mirrors. The 136mm collimating beam leaving the 41.59 grooves/mm R4 echelle grating is refocused near the narrow folding mirror. Through the two cross-disperser prisms and $\phi250 mm(f/1.5)$ transmission camera, the beam images on EEV $2k\times4k$ CCD. The BOES can take the wavelength range of 3700 to $10100{\AA}$ at a single spot with spectral resolution R = 20000 to 40000 depending on the fiber set employed. We describe the key sciences and performance, current status of construction, and future plan of the BOES.

• 천문학회보
• /
• 제41권2호
• /
• pp.65.1-65.1
• /
• 2016

일반적으로 천체 망원경에 사용되는 반사경은 유리 소재로 제작된다. 그러나 알루미늄을 반사경 소재로 사용하면 광기계구조물과 반사경의 열팽창계수가 유사하여 치수 안정성이 높다는 장점이 있다. 뿐만 아니라 다이아몬드 선삭 기계 (Diamond Turning Machine, DTM)를 이용할 수 있기 때문에 반사경의 가공 시간 및 제작 비용을 절감할 수 있다. 본 연구에서는 알루미늄 합금 (Al6061-T6)을 소재로 구경 150 mm, 초점거리 600 mm인 포물면 반사경을 제작하였다. 우선 DTM을 이용해 알루미늄을 가공하였는데, 이 때 표면 조도와 관련된 고주파 오차 (High Frequency Error, HFE)가 발생한다. 따라서 표면 조도를 향상시키기 위한 추가적인 공정으로써 가공된 표면을 도금한 후 열처리를 하고, 폴리싱과 이중 코팅을 거쳐서 최종 반사경을 얻었다. 각 단계별 공정을 마친 후에는 접촉식 및 광학식 형상 측정 방법으로 표면 측정을 실시하여 이를 분석하였다. 본 발표에서는 각 공정 단계에서의 반사경 표면 분석 결과를 설명할 것이며, 제작된 알루미늄 반사경과 기존의 유리 소재의 반사경을 성능 면에서 비교할 것이다.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.11-18
• /
• 1999

This paper describes the weldability of carbon steel and stainless steel using 5㎾ $CO_2$ laser system with nearly multi-mode beam and a parabolic focusing mirror. In the laser welding of steels, major welding parameters are focal point, travel speed, beam power, shield gas and gap tolerance, etc.. Two kinds of gases(Ar, He) were used as a assist gas and supplied through the external nozzle. It is very important for optimum condition to remove plasma plume which absorbs laser beam and to obtain deep penetration and sound weld bead. Bead-on-plate welding tests were carried out for the experiments. Penetration data were obtained with various welding parameters and the effects of welding parameters were discussed. Butt welding tests were performed with various conditions. Only the optimum laser parameters assured good weld quality As a result of this study, We achieve the fundamental weldabilities using a high power $CO_2$ laser for carbon steel and stainless steel.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.247-255
• /
• 2012

Daylighting has a very effective role in reducing power consumption and improving indoor environments in office buildings. Previously, it was not under consideration as a major source of renewable energy due to poor reliability in the design. Optical fiber as a transmission medium in the daylighting system demands uniform distribution of light to solve cost, heat, and efficiency issues. Therefore, this study focuses on the uniform distribution of sunlight through the fiber bundle and to the interior of the building. To this end, two efficient approaches for the fiber-based daylighting system are presented. The first approach consists of a parabolic mirror, and the second approach contains a Fresnel lens. Sunlight is captured, guided, and distributed through the concentrator, optical fibers, and lenses, respectively. At the capturing stage, uniform illumination solves the heat problem, which has critical importance in making the system cost-effective by introducing plastic optical fibers. The efficiency of the system is increased by collimated light, which helps to insert maximum light into the optical fibers. Furthermore, we find that the hybrid system of combining sunlight and light emitting diode light gives better illumination levels than that of traditional lighting systems. Simulation and experimental results have shown that the efficiency of the system is better than previous fiber-based daylighting systems.

• 한국광학회지
• /
• 제31권2호
• /
• pp.81-87
• /
• 2020

본 연구에서는 좁은 지향각, 높은 최대 중심광도를 갖는 탐조등 광학계 설계 기술 연구를 진행하였다. 기존 탐조등 광원인 할로겐램프와 제논램프는 진동과 충격에 취약하며, 크기가 크고 무거워 운반에 많은 어려움이 있다. 또한 탐조등 후면부에 위치한 포물경은 제작 시 광원과 조립 오차에 따른 성능 저하와 낮은 광 효율의 단점을 지니고 있다. 이를 해결하기 위해 본 논문에서는 1 kW 할로겐램프를 150 W급 고출력 COB LED로 대체하고 목표 성능을 만족하기 위한 고효율 TIR 렌즈를 설계하였다. 이후 광학계 사출 시 발생하는 표면 오차를 해결하는 방안으로 TIR 렌즈 어레이를 제시하여 제작 신뢰성을 확보하였다. 설계된 광학계를 바탕으로 시제품을 제작한 후 시중 할로겐램프 탐조등과 성능을 비교하여 광학 성능의 우수함을 확인하였다.

• 한국광학회지
• /
• 제16권1호
• /
• pp.50-55
• /
• 2005

기준광과 탐사광의 경로길이가 매우 크게 차이가 나는 경로길이 불일치 간섭계(unequal path interferometer)를 이용한 직경 300mm 카세그레인 형태의 인공위성 망원경과 같은 대구경 광학계의 변조전달함수(modulation transfer function : MTF)와 파면오차를 동시에 측정하는 방법을 제안하고 이를 실험적으로 확인하였다. 이러한 경로불일치 간섭계를 이용한 측정시스템에서 필요한 평행한 시준광을 만들기 위해서 쌍방향 층밀리기 간섭계를 사용하였으며, 파면오차를 측정하기 위해서 직경 400 mm인 비축 포물경을 사용하는 긴 광경로차의 대구경 피조우 간섭계를 사용하였다. 또한 회전하는 확산판을 이용하여 레이저 광을 부분가간섭광으로 바꿈으로써 피조우 간섭계의 파장으로부터 쉽게 MTF를 측정할 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제40권5호
• /
• pp.23-34
• /
• 2020

Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

• 센서학회지
• /
• 제30권5호
• /
• pp.331-336
• /
• 2021

The Non-dispersive Infrared (NDIR) gas sensor has high selectivity, measurement reliability, and long lifespan. Thus, even though the NDIR gas sensor is expensive, it is still widely used for carbon dioxide (CO₂) detection. In this study, to reduce the cost of the NDIR CO₂ gas sensor, we proposed the new optical waveguide structure design based on ready-made gas pipes that can improve the sensitivity by increasing the initial light intensity. The new optical waveguide design is a structure in which a part of the optical waveguide filter is inclined to increase the transmittance of the filter, and a parabolic mirror is installed at the rear end of the filter to focus the infrared rays passing through the filter to the detector. In order to examine the output characteristics of the new optical waveguide structure design, optical simulation was performed for two types of IR-source. As a result, the new optical waveguide structure can improve the sensitivity of the NDIR CO₂ gas sensor by making the infrared rays perpendicular to the filter, increasing the filter transmittance.

• 한국광학회지
• /
• 제16권4호
• /
• pp.304-312
• /
• 2005

본 연구에서는 여러 형태의 회절광학요소의 field performance를 조사하였다. Zemax 프로그램을 이용하여 다섯 개의 회절광학요소, 즉 투과형 평면 DOE, 투과형 곡면 DOE, 반사형 포물면 DOE, 반사형 평면 DOE, 그리고 반사형 곡면 DOE를 설계하였다. 그리고 이들 회절광학요소에 극자외선 파장인 13 nm와 가시광선 파장인 632.8 nm를 적용시켰다. 이들 DOEs에 사입사 조명시의 회절 한계 하에서의 시야각의 크기 및 파장에 따른 특성, 그리고 주된 수차의 형태를 상호분석 비교하였다. 회절한계 하에서 투과 및 반사 형태 모두에서 곡면 DOEs의 시야각이 평면 DOEs의 시야각보다 훨씬 크다는 것을 알 수 있었다. 또한 사입사 경우에 평면 DOEs와 포물면경의 주된 수차는 코마이며, 곡면 DOEs의 주된 수차는 비점수차와 상면만곡의 혼합된 형태로 나타남을 알 수 있었다. 측정을 통하여 얻은 시야각의 크기와 수차의 종류가 이론적인 결과와 잘 일치함을 알 수 있었다. 또한 극자외선영역에서 평면형 DOEs에 비해 곡면형 DOEs의 field angle의 증가율이 가시광선에서보다 더 효과적임을 알 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.82-88
• /
• 2011

The artificial increase in the solar intensity incident on solar cells using lenses or mirrors can allow solar cells to generate equivalent power with a lower cost. There are two types of concentration optics for solar energy conversion. One is to use mirrors, and the other is to use Fresnel lenses. The gains that can be achieved with a Fresnel lens or a parabolic mirror are compared. The result showed the gains are comparable and the two configurations were developed competitively. In application areas of Fresnel lenses as solar concentrators, several variations of design were devised and tested. Some PV systems still use commercially available flat Fresnel lenses as concentrators. A convex linear Fresnel lens to improve the concentration ratio and the efficiency is devised and flat linear Fresnel lens in thermal energy collection is utilized. In this study, we designed and optimized flat Fresnel lens and the 'light pipe' to develop 500X concentrated solar PV system. In the process, we compare the transmission efficiencies according to groove types. We performed rigorous ray tracing simulation of the flat Fresnel lenses. The computer aided simulation showed the 'grooves in case' has the better efficiency than that of 'grooves out case'. Based on the ray-trace results we designed and manufactured sample Fresnel lenses. The optical performance were measured and compared with ray-trace results. Finally, the optical efficiency was measured to be above 75%. All the design and manufacturing were performed based on that InGaP/InGaAs/Ge triple junction solar cell is used to convert the photon energy to electrical power. Field test will be made and analyzed in the near future.