• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.152-153
• /
• 2015

Recently, solar energy generation is one of the fastest growing industries for eco-friendly energy. Every year, solar energy generation industry grows to 42% on average. However, polysilicon sludge is generated from processing of polysilicon but, there is nothing to handle that. Therefore, we need research to recycle polysilicon sludge. Also, improved fire resistance efficiency of wall is required according to reinforced fire safety standards due to many cases of big fires in our country. This study focuses on density and strength properties according to the addition ratio of paper Ash for the lightweight composite panel core with polysilicon sludge. As a result of the test, adding paper ash 9% has the best density and strength properties.

• 한국지반환경공학회 논문집
• /
• 제1권1호
• /
• pp.19-26
• /
• 2000

본 연구에서는 일련의 실내시험을 통하여 제지회의 기본특성, 다짐, 압축강도, 압밀, 투수 및 CBR 특성을 분석하여 폐기물 매립장의 차수재와 복토재 등의 건설재료로서 제지회의 활용가능성을 연구하였다. 본 연구에서 제지회는 청주근교 4개의 제지공장에서 채취된 시료를 사용하였으며, 제지회의 투수특성을 확보하기 위하여 혼합재로서 벤토나이트와 소석회를 사용하였다. 시험결과, 벤토나이트와 소석회의 혼합비가 증가함에 따라 최대건조단위중량은 증가하였으며, 일축압축시험결과 제지회는 복토재의 일축압축강도 기준을 만족하고 있는 것으로 나타났다. 또한, 벤토나이트의 혼합비가 증가할수록 투수계수는 감소하였으며, 차수재로 사용 가능한 투수계수가 $1{\times}10^{-7}cm/sec$ 이하로 되는 벤토나이트의 혼합비는 30%로 평가되었다.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.153-161
• /
• 1998

This paper is to investigate the Fluidity of Antiwashout Underwater Concrete containing Fly Ash. The results of study are concluded as follows: the increase in Slump Flow value did not happen in the plain concrete which was replaced cement by Fly Ash; however, the maximum value could reach in the replacement of 30% of Fly Ash by weight of cement in the Fly Ash replaced concrete. On the condition of Fly Ash-Antiwashout Underwater Concrete in expecting 50 cm of the Slump Flow, it was necessary that the usage amount of Superplasticizer be around 1% of unit Binder, and 1.5% in 60 cm of the Slump Flow, respoectively.

• 한국농공학회지
• /
• 제44권3호
• /
• pp.122-135
• /
• 2002

Although fly ash possesses viable engineering properties, an overwhelming majority of fly ash from coal combustion is still placed in storage or disposal sites. Similarly, sludges generated from various water treatment operations are predominantly subjected to the fate of land disposal. To prepare sludges fur land disposal typically requires time consuming dewatering schemes, which can become extremely difficult to execute depending upon the composition of the sludge and its affinity for water. This study was undertaken to reuse fly ash and sludge as construction materials. This paper includes geotechnical properties of fly ash and fly ash-lime-sludge mixture and results of compaction test, UU-test, falling head test, leaching test and CBR test. The effect on mixing fly ash with sludge and lime and the effect of curing period and the results are obtained from this test.

• 한국해양공학회지
• /
• 제14권1호
• /
• pp.74-79
• /
• 2000

The purpose of this paper is to recycle coal ash as structural backfill materials from electric power plants. Two million tons of coal ash are produced annually. The laboratory test was executed for the basic compatibility as substitution for structural backfill materials and the optimal mixture ratio(fly ash : bottom ash) was decided. In addition the model test was performed using medium scale earth pressure model with small size earth pressure cells model box data logger and some other apparatuses. Mixed coal ash and excellent backfill materials(coheisonless soil SW) were compared in the view of lateral earth pressure variation depending on wall displacement. The reduction of earth pressure when coal ash was used as a bockfill material was monitored comparing to that of cohesionless soil. the cost and environmental pollutants by treating coal ash can be reduced through developing the recycling technology.

• Computers and Concrete
• /
• 제10권4호
• /
• pp.349-360
• /
• 2012

In this paper, compressive strength, water permeability and abrasion resistance of concretes containing high volume fine fly ash (FFA) and fine ground palm oil fuel ash (GPA) were studied. Portland cement type I was replaced with FFA and GPA at dosages up to 70% by weight of binder. Ground river sand (GRS) was also used to replace Portland cement in order to indicate the level of filler effect. Results indicated that FFA was slightly more reactive than GPA. The replacement of 40-70% of FFA produced concretes with compressive strength, permeability and abrasion resistance comparable to those of normal concretes. The incorporation of GPA slightly reduced the performances of concretes as compared to those of FFA concretes. The reduction of Portland cement was partly compensated by the increase in pozzolanic activity of the fine fly ash and palm oil fuel ash and thus enabled the large replacement levels.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.125-130
• /
• 1990

Fly Ash in concrete is known to be effective in improving workability, the reduction of heat of hydration, increasing the long-term compressive strength, and improving durability. Recently, fly ash is consedered an essential material for the high-strength concrete. In this paper, investigations for the strength and workability characteristics was carried out when fly ash was used in the high-strength concrete. As the result, fly ash was effective in increasing the long-term compressive strength, but the short-term compressive strength was gradually decreased with increating fly ash contents. And also the use of superplasticzers was required for providing the proper workability when fly ash contents were increased. The optimum content of fly ash was about 10%.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.1-6
• /
• 2010

Paper industry in Korea produces 14 million tons of paper and 1.3 million tons of sludge per year. Most of them has been treated by incineration, landfilling or ocean dumping. The sludge recycling to minimize the impact on the environment, so its importance is highlighted. In this study, in order to develop a new way of recycling the sludge, it was calcined and the recycled ash was tried to use as papermaking filler. Concerning the yield of calcium carbonate and the brightness and the rheology of the recycled calcination sludge, the optimum calcination conditions were found to be $600^{\circ}C$ and 12 hours. The sludge ash itself was not suitable for papermaking due to its color and low brightness. Thus the ash from the sludge was first mixed with a commercial filler and then utilized for papermaking. The effect of the increased hardness after high temperature treatment on wire abrasion was confirmed.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.166-171
• /
• 2014

기포콘크리트의 재료 중 시멘트는 제조과정 중에 $CO_2$를 다량 발생시키기 때문에 지구 환경적인 측면에서 커다란 문제가 되고 있지만, 아직까지 시멘트를 대체할 수 있는 대체재에 대한 연구 개발이 미흡한 실정이다. 또한, 발포제는 압축강도가 낮고 고가인 단점이 있다. 이 때문에 강도와 경량 등의 성능 개선과 친환경적인 재료의 사용이 필요한 실정이다. 이에 본 연구에서는 시멘트와 발포제를 대체하기 위해 고로슬래그와 제지애시를 사용하여 경량 경화체를 제조하고자 하였으며, 강도 및 경량성을 보완하기 위해 플라이애시와 폴리실리콘 슬러지를 사용하여 실험을 실시하였다. 그 결과, 플라이애시를 사용한 경화체는 Plain 보다 낮은 밀도를 나타내었으나 강도보완에는 취약하였으며, 폴리실리콘 슬러지를 사용한 경우는 3%치환한 경화체가 압축강도는 Plain보다 다소 낮지만 겉보기 밀도의 감소가 큰 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.804-812
• /
• 2001

A triboelectrostatic separation system for removing unburned carbon from coal fly ash is designed and evaluated. Fly ash from a coal-fired power plant is used as an accepted additive in concrete where it adds strength, sulfate resistance and reduced cost, provided acceptable levels of unburned carbon are maintained. Unfortunately, unburned carbon in coal fly ash absorbs some of other additives and reduces the concrete strength. This paper describes to investigate dry triboelectrostatic process to separate unburned carbon from coal fly ash and utilize it into economically valuable products. The laboratory-scale triboelectrostatic separation system consists of a particle feeding system, a tribocharger, a separation chamber, and collection systems. Particles of unburned carbon and fly ash can be imparted positive and negative surface charges, respectively, with a copper tribocharger due to differences in the work function values of the particles and the tribocharger, and can be separated by passing them through an external electric field. Results showed that fly ash recovery was strongly dependent on the electric field strength and the particle size. 70wt% of fly ash containing 6.5wt% of carbon contents could be recovered at carbon contents below 3%. The triboelectrostatic separation system showed a potential to be an effective method for removing unburned carbon from coal fly ash.