• 복식문화연구
• /
• 제23권5호
• /
• pp.922-927
• /
• 2015

Checks are best considered as a (visible) sub-set of grids, and each check consists of two assemblies of parallel lines, one superimposed on the other at ninety degrees. In the conventional textile context, one assembly of parallel yarns is superimposed on another at ninety degrees. These parallel lines caused by the yarns remain visually apparent in the finished composition. Commonly, checks are considered simply as a variety of woven textile and Scottish clan tartans, or plaids (common terminology for tartans in the USA), famously display a checked feature, using differently colored yarns in woven-textile form. Often the sequence of colours and the numbers of yarns used is equal in both warp and weft directions. Where this is the case, the tartan may be considered to be 'balanced' or 'regular', with the component yarns creating square units repeating across and down the fabric. Thus in balanced tartans, lengthways components have identical ordering, colouring and measured width to those used widthways. Meanwhile an unbalanced check lacks one or more of these attributes. This paper explores further the nature of Scottish clan tartans, using data collected from collections of rare tartans held at ULITA - An Archive of International Textiles at the University of Leeds.

• 한국의류산업학회지
• /
• 제1권4호
• /
• pp.387-392
• /
• 1999

The effects of the ratio of warp diameter to filling diameter (${\beta}$-ratio) and warp thread crash on the crimp factor and the yarn curvature were studied theoretically in this paper. The models of 2/2 twill fabric derived square cloth and sinusoidal curved cloth were used for the theoretical analysis. The crimp factors (C) for the models were given theoretically as follows; (1) Derived square cloth(general equation for b) $$C=\frac{(1+{\beta})({\theta}-sin{\theta})}{(1+{\beta})sin{\theta}+{\alpha}}$$ (2) Sihusoidal curved cloth $$C=\frac{(1+{\beta})sin{\theta}\[1+\{\frac{{\pi}(1-cos{\theta})}{4sin{\theta}}\}^2\]+{\alpha}}{(1+{\beta})sin{\theta}+{\alpha}}-1$$ The curvatures(${\kappa}$) for the models were given theoretically as follows; (1) Derived square cloth $${\kappa}=\frac{2}{d_w+d_f}$$ (2) Sinusoidal curved cloth $${\kappa}=\|{^{\;\;\prime\prime} \atop r}(s)\| \\ where \;s=\frac{p^'}{{\pi}}\(u+\frac{k^2u}{4}+\frac{k^2}{8}sin2u\)$$.

• Composites Research
• /
• 제13권6호
• /
• pp.63-72
• /
• 2000

본 논문에서는 평직복합재료의 섬유다발의 배열 및 적층수가 등가물성치에 미치는 영향을 연구하였다. 임의로 적층된 2~32장의 평직복합재료 구조물의 단위구조를 모델링 하였고, 단위구조의 외부 경계 면에는 반복 경계조건을 가하였다. 등가물성치는 일축 인장시험 및 전단시험을 수치적으로 모사하여 계산하였고, 섬유다발 위상차의 무작위적 특성은 표본해석을 통해 고려하였다. 계산 된 등가물성치의 통계처리 결과, 두께가 얇은 평직복합재료의 $E_{xx}$와 $V_{xy}$는 위상차의 영향을 크게 받았고, 넓은 빈도분포를 보였다. 그러나 적층수가 증가함에 따라 분포의 폭은 감소하였고 평균값은 일정한 값으로 수렴하였다. 반면에, 섬유다발의 면내 방향으로의 이동 및 적층수의 변화는 $G_{xy}$에 거의 영향을 미치지 않는 것으로 나타났다.

• Journal of Computing Science and Engineering
• /
• 제11권3호
• /
• pp.79-91
• /
• 2017

In this paper, the abdominal-deformation measurement scheme is conducted on a shape-flexible mannequin using the DIC technique in a stereo-vision system. Firstly, during the integer-pixel displacement search, a novel fractal dimension based on an adaptive-ellipse subset area is developed to track an integer pixel between the reference and deformed images. Secondly, at the subpixel registration, a new mutual-learning adaptive particle swarm optimization (MLADPSO) algorithm is employed to locate the subpixel precisely. Dynamic adjustments of the particle flight velocities that are according to the deformation extent of each interest point are utilized for enhancing the accuracy of the subpixel registration. A test is performed on the abdominal-deformation measurement of the shape-flexible mannequin. The experiment results indicate that under the guarantee of its measurement accuracy without the cause of any loss, the time-consumption of the proposed scheme is significantly more efficient than that of the conventional method, particularly in the case of a large number of interest points.

• 한국의상디자인학회지
• /
• 제8권1호
• /
• pp.25-36
• /
• 2006

This paper investigates recent trend and characteristic of sports casual ware. By literature review and case study, it compares active sports casual ware with sports ware and analyzes how the latter has been applied to the former. Further, it attempts to assess future design trend of sports casual ware The result of the analysis of 2004 F/W season's trend is the following. Most brands emphasize classic factors and, at the same time, adopts recent trends. They effectively use splendid colors to expose brand identity, and take advantage of sports games as a marketing tool of special lines. In addition, designs emphasizing women's sexy and healthy style are popular in sports casual ware. Recent trend is characterized by cross-over or hybrid. Active sports ware is expanded to a mixture with casual ware or casual ware featured sportive details and images.

• 패션비즈니스
• /
• 제6권5호
• /
• pp.41-47
• /
• 2002

Until now, there is a tendency of most textile research focused on the certain specific area of textiles in profound. This paper based on the case study of inspection of manufacturing men's formal wear has been investigated in the relationship between defection of men's formal wear and mechanical properties of textile for fall and winter. As a results of implementing Pearson's Correlation, density, blend rate, bending property, the rate of silk blend, the formality of sewing are correlated with defection of men's formal wear. However, it is required the defection of classification standard in various types of the finished product in a further study. In addition to increase efficiency of production in the manufacture, it is necessary for scholars to investigate the direction of research according to the contingency approach based on the systems approach.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.72-78
• /
• 2005

The impact of fiber friction, yarn twist, and splicing air pressure on mechanical and structural properties of spliced portion have been reported in the present paper. The mechanical properties include the tensile and bending related properties and, in the structural properties, the diameter and packing density of the splices are studied. A three variable three level facto­rial design approach proposed by Box and Behnken has been used to design the experiment. The results indicate that there is a strong correlation between retained spliced strength (RSS) and retained splice elongation (RSE) with all the experimental variables. It has been observed that RSS increases with the increase in splice air pressure and after certain level it drops, whereas it consistently increases with the increase in yarn twist. The RSE increases with the increase in both fiber friction and yarn twist. It has also been observed that the yarn twist and splicing air pressure have significant influence on splice diameter, percent increase in diameter and retained packing coefficient, but the fiber friction has negligible influence on these parame­ters. Yarn twist and splicing air pressure has a strong correlation with splice flexural rigidity, where as poor correlation with retained flexural rigidity.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.53-60
• /
• 2018

고생산성 스마트공장을 실현하고 섬유 공정간 소량 및 대량 생산 요구에 대응할 수 있는 공장간 협업 기능성을 위해서 ICT개념이 도입되고 있다. ICT 기반의 협업 생산과 제조공정 최적화를 통해 제품 개발기간과 원가, 품질, 납기를 개선하여 고생산성 섬유제품을 생산 할 수 있는 ICT 융합형 모니터링 시스템이 필요하다. 본 논문에서는 봉제기 밑실 부분에 실제 장착 가능한 비접촉식 디지털 광 화이버 센서를 이용하여 밑실잔량을 센싱하여 IoT기반 라떼판다 보드 디스플레이에 표출하는 시스템 설계를 제안하고 구현 하였다. 이는 기존 밑실잔량 센싱 장치에 비해 소형화 되어 봉제기에 적용 우수한 성능을 확보할 수 있다.

• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.70-79
• /
• 2017

Weft straightener is an important process to control the final quality of the fabrics. It is needed to calibrate the distorted weft after dyeing process. During various fabric treatment processes, the fabric is almost done with heat treatment through a tenter machine. At this time, weft distortion is occurred with uneven tension distribution. Traditionally, photo sensor is commonly used to detect the weft distortion but it is not applicable for special fabric types such as twill, mesh, combi, etc. In this paper, a new method for detecting the weft distortion using camera is introduced. A new weft straightener simulator is also developed to test the ability of the proposed method. It is shown that the method can be applied for various fabric types.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.133-138
• /
• 2017

Recently, CFRP composites are widely used as lightweight materials have with excellent mechanical properties and can beare widely used in various fields. In general, thermosetting resins are used for CFRP. However, in recent years, studies have been carried out using thermoplastic resins have been actively carried out to overcome the disadvantages of thermosetting resins. The LFT-D system is a molding method in which a fiber is directly cut to a the desired length while being impregnated with a thermoplastic resin to produce a compound and that is then press-molding molded to form the product. In this paper, before the production of the trailing arm, the compression molding analysis was carried out in order to grasp the problems that may occur during production. Through cCompression molding analysis was applied to calculate of the minimum press pressure and to compare and analysis analyze the molding conditions characteristic required to formfor forming the trailing arm.