• 청정기술
• /
• 제3권2호
• /
• pp.13-24
• /
• 1997

The present paper aims to give basic information to establish zero emission material cycle including the minimization of emissions from industrial production processes and the area in regional scale. Strategies and methodologies to analyze emissions from the production processes and our human activities and to reduce those emissions by refining and/or replacing the unit process with the alternatives are introduced as well. Quantitative evaluation and management systems of any raw materials and the production process are from vie points of treatment are essential. Estabiishment of a process networking for the recycle of discharged non-products materials by the intra-process, trans-process and the trans-industries are proposed. Procedures and priorities to formulate industrial and regional zero emission system are proposed as well.

• 한국CDE학회논문집
• /
• 제17권6호
• /
• pp.387-397
• /
• 2012

The world has faced with various environmental problems such as climatic change, global pollution, and depletion of natural resources. Conventional economic development continues not only to intensify the magnitude of the problems but also to damage growth potential of future generations. Therefore, recent manufacturers are highly required to accommodate themselves to sustainable development that aims at preventing the loss to the future generations. Moreover, the manufacturers are under heavy pressure from various environmental regulations. This paper proposes green bill of material (Green-BOM) which conforms to the environmental regulations to restructure eco-friendly manufacturing system. Green-BOM is useful for managing green product and process information to satisfy several environmental regulations by recording energy consumption, recycle rate, volatile organic compounds (VOCs), substance information, and so on.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.143-148
• /
• 2004

In this paper, the properties of inter - locking block using fly ash are discussed in order to provide economical advantages and improve quality, and protect environment and recycle resources. Fly ash is the by-product of coal in thermal power plant. The experimental parameters are fly ash content, the amount of AE water - reducing agent and mixing proportion of cement mortar. According to the experimental results, the improvement of quality in the side of strength, absorption ratio and freeze - thaw resistance for manufacturing inter -locking block and the curtailment of cost can be achieved in case of 15% of fly ash and 0.3% of AE water- reducing agent are mixed into mortar mixture of 1 :6(C:S).

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1085-1090
• /
• 2007

The performance of EF (electroflotation) on the thickening of activated sludge were investigated using laboratory scale batch flotation reactor. In this paper, the effects of parameters such as electrode material, NaCl dosage, initial sludge concentration and electrode distance were examined. The results showed that the performance for sludge thickening of the five electrodes lay in: Pt/Ti > Ru/Ti > Ir/Ti > Ti mesh > Ti plate. The more NaCl dosage was high, the more sludge was thickened and the shorter thickening time was obtained. However, considering the final thickening time and sludge concentration, optimum NaCl dosage was 0.5 g/L. Thickening time and sludge concentration was not affected by electrode distance. In DAF (dissolved air flotation) system, optimum recycle ratio was 40% and thickening performance was lower than that of the EF.

• 한국산업융합학회 논문집
• /
• 제21권3호
• /
• pp.109-115
• /
• 2018

This paper proposes the method to develop the fuel of suljigemi pellet using agricultural by-products the occurred during the manufacturing of alcohol. The goal of the development of suljigemi using biomass is to make the pellet fuel of high calorie. The suljigemi pellet is difficult to recycle waste in the manufacture company of alcohol. suljigemi pellet has the effect of zero emission as the soil conditioner using ash after burning. Also suljigemi pellet has the reduction effect of carriage fee, fuel economy and low-cost high-efficiency effects, environmentally clean fuel as CO2 emissions savings. So the technologies of the suljigemi fuel pellet are developing low carbon, green growth renewable energy fuel through futuristic energy system will be. In experiments, suljigemi pellets confirmed the calories by about 10% higher than wood pellets with the same conditions.

• 경영과학
• /
• 제27권3호
• /
• pp.137-147
• /
• 2010

Real-time supply chain environments based on RFID will be an important topic in future society; Nevertheless, adopting RFID in real industry SCM is still in its infancy. The aim of this paper is to develop the physical framework of a fully adopting RFID system from manufacturing to recycle phase and measure the effect. So, we built a simulation station with fully appling RFID and analyzed benefits with mathematic model. Then, specifying the advantages and improvement scheme for real industry limitations were suggested. This work concluded that fully appling RFID in SCM gives improvement of quality and service to both production and consumer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.439-442
• /
• 2004

This paper described a dc power system, which can generate the excessive do power form do bus line to ac source in substation for traction system. The proposed regeneration inverter system for dc traction can be used as both an inverter and an active power filter(APF). As a regeneration inverter mode, it can recycle regenerative energy caused by decelerating tractions and as an active power filter mode, it can compensate for harmonic distortion produced by the rectifier substation.

• 자원리싸이클링
• /
• 제10권2호
• /
• pp.3-12
• /
• 2001

Nowadays, countries all over the world are deeply concerned about pollution in the global environment, so they are seeking various ways to adequately disposal of waste. Still, the environmental situation seems to be getting worse and worse. It is evident that such wastes and pollution have been endangering human life nestled in this globe up to the end of the 20th century. We should not, however, tolerate such human misconduct and mal-management of resources any more in the new millenium. For realizing a society that is sustainable for generations to come, it is important to establish a social system for minimizing wastes, promote re-use and recycling, and develop technology for improving recycling efficiencies, including product designs that facil-itate re-use and recycling and innovative technologies for processing wastes. In this paper, reviewing the current status of Korean waste problems, the governmental policy and specific approach for the establishment for recycling society is considered.

• 교육녹색환경연구
• /
• 제12권1호
• /
• pp.15-24
• /
• 2013

In order to satisfy the requirements of cultivation of talents required by the new age, Chinese primary schools have carried out reform of quality education but are still in the elementary stage of reform such as educational management, teaching approaches and so on. On the contrary, the reform of school facilities which should adapt to the thought of quality education has been not carried out yet. Therefore, under such an circumstance, this paper makes an analysis of development process, current design situation and current distribution status of facilities of primary school sand the merger of primary schools due to decrease of birth rate and urbanization and its reasons and reveals the status quo of facilities of Chinese primary schools, expecting to provide reference for the future transformation and design of school facilities and recycle of abandoned schools.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.123.3-123
• /
• 2001

To recycle the uranium resources in the spent nuclear fuels, all the fuel rods are extracted from the spent fuel assemblies. The remaining components of the spent fuel assembly after extracting all the rods, so called a NFBC(Non-Fuel Bearing Components), should be compacted to minimize the waste volume. To this present, KAERI (Korea Atomic Research Institute) has developed he NFBC compactor by introducing a new concept of cutting and compaction, In this paper, to achieve he maximum compaction ration of the NFBC volume while reducing compactor size, an fuzzy controller, which determines the reference force of the compactor, is proposed with using he fuzzy-inference.