• 제목/요약/키워드: paper plant

검색결과 5,126건 처리시간 0.034초

PLC LD 제어언어와 가상 플랜트 시뮬레이터의 적용 (The application of a virtual plant simulator and a Ladder Diagram of PLC)

  • 이기범;이진수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 B
    • /
    • pp.699-702
    • /
    • 1999
  • This paper represents the application of a virtual plant simulator and a Ladder Diagram of PLC. A target plant is a material transport car that repeatedly conveys along the rails. The whole process is automatically operated by PLC. The simulation system consists of the POSFA PLC and the virtual plant simulator. We demonstrate that operation of a LD program corresponds to operation of the virtual plant simulator.

  • PDF

발전소 과열증기 온도제어 시스템의 국산 DCS 적용에 관한 연구 (Study on application of domestic development DCS for S/H temp in the power plant)

  • 박익수;김은기;박성혁;이기원
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.292-296
    • /
    • 1992
  • There are lots of disturbance in the super heater temperature control system of power plant boiler as follows. 1.Burner light off. 2.Excess Air. 3.Burner tilt. 4.G.R fan flow. Temperature control system of super heater in the power plant has delay time about 5 min. So it is difficult to control the super heater temperature in the power plant. This paper show us the application of domestic development DCS to control the super heater temperature in seoul #5 thermal power plant unit.

  • PDF

Automatic generation of sequence control programs

  • Gohi, Tetuji;Kojima, Fumio;Obana, Hideo;Sugimori, Hisayosi;Tsukimoto, Hirosi
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.463-467
    • /
    • 1992
  • This paper describes the automatic generation of sequence control programs for DCS(Distributed Control System), PLC(Programable Logic Controller) and so on. Since there is no same manufacturing process, it is difficult to standardize sequence programs. We propose the automatic sequence control program generator which is CAD software using knowledge engineering technique.

  • PDF

Rangium koreana Ohwi의 성분 연구 (Study on the component of rangium ohwi)

  • 이용주
    • 약학회지
    • /
    • 제3권1호
    • /
    • pp.21-22
    • /
    • 1957
  • In order to find a resouces of "Rutin", the chemical component of flower of Rangium Ohwi is studied in this paper. Rutin is isolated and identified from f of rutin in flower of this family plants followcetin derived from the isolated substance. The lower of this plant confirming acetate and quering the paper of J. Naghski and W. L. Portes, and no one has reported on the presence of rutin in flower of this plant.

  • PDF

LED 식물공장을 이용한 취미용 원격 식물재배 위탁 시스템에 대한 연구 (A Study on Remote Cultivation Consignment System for Hobby using LED Plant Factory)

  • 조면균
    • 융합정보논문지
    • /
    • 제7권1호
    • /
    • pp.49-54
    • /
    • 2017
  • 본 논문에서는 LED 식물공장과 연계하여 식물재배를 환경을 제공받고 사용자는 원격으로 식물재배에 참여함으로써 개인적인 취미생활을 영위할 수 있는 시스템을 제안한다. 제안 시스템은 아두이노를 기반으로 다양한 센서들을 통해 식물의 생장상황을 모니터링하고 식물생장에 필요한 재배환경을 원격으로 조정함으로써 식물재배 및 수확에 대한 대리만족을 느낄 수 있게 하였다. 한편, 식물공장은 유휴의 공간을 온라인으로 개인에게 유료 분양함으로써 일정한 소득원을 확보하게 되어 상호 이득이 되는 구조를 제안한다. 결론적으로 본 논문은 아두이노와 안드로이드 애플리케이션(앱)을 이용하여 원격 식물재배 위탁시스템의 시작품을 제작하여 보임으로써, 제안 시스템의 실현가능성을 보이고 향후 이를 이용한 LED 식물공장의 대중화 및 사업 영역확장에 기여 할 것이다.

Robust Controller Implementation in DCS for a MIMO Paper-making Process with long transport delays

  • Kang, Ki-Ho;Lee, Bong-Kuk;Lim, Kye-Young
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2002년도 ICCAS
    • /
    • pp.70.3-70
    • /
    • 2002
  • This paper presents a procedure of implementing a robust controller for a paper-making plant in DCSs. A paper-making process generally has triple problems to automatically tune its output qualities . Long transport delays which are not able to be simply linearized. The transfer matrix of the process is not square. And every plant model has some uncertainty in low and middle frequency region. To tackle these problems, a multi-input / multi-output (MIMO) plant model having some uncertainty was derived by considering some physical and mechanical principles of the process. Then a MIMO robust-controller is designed and implemented in a real DCS as function block type. Some special co...

  • PDF

비 최소치목 시스템의 적의 연구 (Adaptive Control of Nonminimum Phase System)

  • Si-Chul Roh
    • 대한전기학회논문지
    • /
    • 제35권11호
    • /
    • pp.529-534
    • /
    • 1986
  • In recent year, there have been much techniques for designing globally stable adaptive control systems when the unknown plant is minimum phase. This paper presents a new seheme for indirect adaptive control structure for nonminimum phase plant of which parameters are estimated from the least-square algorithm. Its effectiveness has been demonstrated by computer simulation carried out for a second-order plant.

  • PDF

Potential of Using Ginger Essential Oils-Based Nanotechnology to Control Tropical Plant Diseases

  • Abdullahi, Adamu;Ahmad, Khairulmazmi;Ismail, Intan Safinar;Asib, Norhayu;Haruna, Osumanu;Abubakar, Abubakar Ismaila;Siddiqui, Yasmeen;Ismail, Mohd Razi
    • The Plant Pathology Journal
    • /
    • 제36권6호
    • /
    • pp.515-535
    • /
    • 2020
  • Essential oils (EOs) have gained a renewed interest in many disciplines such as plant disease control and medicine. This review discusses the components of ginger EOs, their mode of action, and their potential nanotechnology applications in controlling tropical plant diseases. Gas chromatography-mass spectroscopy (GC-MS), high-performance liquid chromatography, and headspace procedures are commonly used to detect and profile their chemical compositions EOs in ginger. The ginger EOs are composed of monoterpenes (transcaryophyllene, camphene, geranial, eucalyptol, and neral) and sesquiterpene hydrocarbons (α-zingiberene, ar-curcumene, β-bisabolene, and β-sesquiphellandrene). GC-MS analysis of the EOs revealed many compounds but few compounds were revealed using the headspace approach. The EOs have a wide range of activities against many phytopathogens. EOs mode of action affects both the pathogen cell's external envelope and internal structures. The problems associated with solubility and stability of EOs had prompted the use nanotechnology such as nanoemulsions. The use of nanoemulsion to increase efficiency and supply of EOs to control plant diseases control was discussed in this present paper. The findings of this review paper may accelerate the effective use of ginger EOs in controlling tropical plant diseases.

USN 기술 기반의 비접촉 식물 생장 측정 시스템 구현 (Implementation of Non-contact Plant Growth Measurement System based on USN Technologies)

  • 석진원;유인태
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권10호
    • /
    • pp.137-145
    • /
    • 2010
  • 본 논문은 USN(Ubiquitous Sensor Network) 기술 기반의 적외선 센서를 사용한 비접촉식 식물 생장 측정 시스템을 제안한다. 제안된 시스템은 식물 생장을 측정할 때 식물의 생장 피해를 줄이기 위하여 비접촉 센서를 사용하였다. 이 시스템은 직경, 단면적, 비대 형상과 같은 식물 생장 요소를 실시간 비접촉 방식으로 측정할 수 있다. 측정된 데이터는 센서 네트워크 기술을 사용하여 원격 서버까지 전송되고, 서버에서 저장 및 분석되며, 최종적으로 분석된 데이터는 사용자에게 제공될 수 있도록 구성하였다. 본 논문에서 제안된 식물 생장 측정시스템은 측정 방식과 장치에 비접촉 적외선 센서를 사용하여 설계 및 구현을 하였다. 그리고 시스템의 성능은 필드에서 측정 실험을 통하여 검증해 보았다.

Choosing an optimal connecting place of a nuclear power plant to a power system using Monte Carlo and LHS methods

  • Kiomarsi, Farshid;Shojaei, Ali Asghar;Soltani, Sepehr
    • Nuclear Engineering and Technology
    • /
    • 제52권7호
    • /
    • pp.1587-1596
    • /
    • 2020
  • The location selection for nuclear power plants (NPP) is a strategic decision, which has significant impact operation of the plant and sustainable development of the region. Further, the ranking of the alternative locations and selection of the most suitable and efficient locations for NPPs is an important multi-criteria decision-making problem. In this paper, the non-sequential Monte Carlo probabilistic method and the Latin hypercube sampling probabilistic method are used to evaluate and select the optimal locations for NPP. These locations are identified by the power plant's onsite loads and the average of the lowest number of relay protection after the NPP's trip, based on electricity considerations. The results obtained from the proposed method indicate that in selecting the optimal location for an NPP after a power plant trip with the purpose of internal onsite loads of the power plant and the average of the lowest number of relay protection power system, on the IEEE RTS 24-bus system network given. This paper provides an effective and systematic study of the decision-making process for evaluating and selecting optimal locations for an NPP.