• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 추계학술대회 및 정기총회
• /
• pp.113-121
• /
• 2005

Virtual Manufacturing is a powerful methodology for developing a new product, new equipment and new production system. It enables us to check the errors in design before production. This paper deals with a case study of virtual manufacturing in an excavator factory. Boom and rotating table of upper body are selected for application. 3D models of parts and fixtures are developed with CATIA and 3D simulation models are developed with IGRIP. These models are used for the design of fixture to verify the motion of the equipment. As a result, the manual welding systems are replaced by automatic systems and many design errors are corrected in the design phase, which enables us to reduce the developing cost and time.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.510-516
• /
• 2010

In this paper, a dynamic GTS allocation method of wireless control networks is proposed for the use of factory automation using IEEE 802.15.4 MAC protocol. A superframe of IEEE 802.15.4 is applied to the transmission method of real-time periodic I/O data of wireless control systems within the limited time in factory environment. The method is proposed for efficient transmission of real-time periodic I/O traffic. The simulation results show the average network utilization and available I/O node numbers could be increased by the proposed method.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 춘계학술대회
• /
• pp.149-159
• /
• 2003

In this paper, I analyzed the industrial system and agriculture system about safety between korea and australia. An agriculture which is one of the national security industry, has recognized the importance. International country have attention to the automatization of machine for the improvement of agriculture. However, because of modernization of agriculture, the rate of accurrence about agriculture accident has increased dramatically. Especially the rate of accurence of agricultural accident is higher than the other industrial accident in the developed country. Because of these reasons, developed country has efforted to the agriculture systemabout safety. Australia law for the safety system of agriculture is very well and the rate of accident in the self-management agriculture is included in the statistics of industrial but The rate of accident in self-management agriculture is very higher. Korea has many middle size factory to make new goods and factory accurre very many accident. Because Korea government research the theory and practical affairs for the industrial system about safety and health to protect industrial accident In future we have to try new method about Agriculture Safety of Korea.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.83-91
• /
• 1999

Dynamic characteristic of manufacturing stage is understood and the utilization of each machine is maximized by developing on-line dynamic CAPP system to consider the overloads in the aircraft part manufacturing line. In this paper, a scheme of production planning and scheduling system was proposed through inspection about some predeveloped CAPP system. Developed production planning and scheduling system included process planning module. After precise inspection of some FMS line schema at domestic heavy industry, optimized FMS line was applied to aircraft part manufacturing and repairing factory. By virtue of considering overloads of factory and machine through on-line dynamic CAPP system, the utilization of resources is maximized and manufacturing lead time is minimized.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.754-755
• /
• 2017

CPS는 실제 물리 세계와 그 위에서 진행되는 다양하고 복잡한 프로세스들과 정보들을 인터넷을 통해 데이터에 접근 및 처리하는 서비스 기반으로 사이버 세계에 밀접하게 연결시켜주는 컴퓨터 기반 구성 요소 및 시스템을 말한다. 본 논문에서는 CPS 연구의 일환으로 제조 현장에 적용 가능한 프레임 워크를 제안한다.

• 기술혁신연구
• /
• 제7권2호
• /
• pp.101-118
• /
• 1999

Factory automation(FA) is a part of technological innovation to make production process more efficient and it also facilitates technological innovation by accumulating the internalization ability of newly imported technology Introduction of FA, however, does not guarantee the increase of production efficiency and high product quality, moreover, the competitiveness of firm. The purpose of this paper is to analyze the relationship between firm's behavioral characteristics during implementation process of FA and organizational performance, and to find out success factors of FA. Results of the case studies for 4 SME's show that financial stability and the fitness between corporate strategy and the purpose of FA are the necessary conditions for successful implementation of FA. But the organizational restructuring for new manufacturing system, openness of all communication channels, and common mind of employees are also needed to achieve the high degree of performance from FA, especially the benefits of qualitative or organizational level.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.450-455
• /
• 1997

According to the fire statistics of the Ministry of Home Affairs, the fire ratio in factories, work places and warehouses shows 21.5% among total fire of buildings except the fire on cars or other fires. Especially, the buildings like factories and warehouses, which have a lot of ignitable sources and thus always have a strong possibility of fire, are needed to have well planned strategy in terms of life safety and property protection. In this respect, the present paper analyses the existing fire cases in factories, finds out the fire properties of factory buildings, and evaluates the codes concerning fire resistance and fire severity.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.255-264
• /
• 1996

This Paper presents a heuristic algorithm for machine-part group formation considering part production information (Production volume, roution sequence, unit operation time, facility size) in cellular manufacturing logistics system. In general, factory space is restricted within limited size when cells are located. A twofold heuristic algorithm is developed for considering factory space restrictions of located cells. The first phase is a aggregation procedure to minimize inter cell movement for satisfactoring space restriction. The second phase is a rearrangement procedure to maximize line balancing efficiency between machines within the cell and non assigned machine during first phase. Numerical example is presented to verify the efficiency of proposed algorithm.

• 대한임베디드공학회논문지
• /
• 제16권3호
• /
• pp.89-97
• /
• 2021

Voice interface can not only make daily life more convenient through artificial intelligence speakers but also improve the working environment of the factory. This paper presents a voice-assisted work management system that supports both speech and speaker recognition. This system is able to provide machine control and authorized worker authentication by voice at the same time. We applied two speech recognition methods, Google's Speech application programming interface (API) service, and DeepSpeech speech-to-text engine. For worker identification, the SincNet architecture for speaker recognition was adopted. We implemented a prototype of the work management system that provides voice control with 26 commands and identifies 100 workers by voice. Worker identification using our model was almost perfect, and the command recognition accuracy was 97.0% in Google API after post- processing and 92.0% in our DeepSpeech model.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.181-189
• /
• 2023

In this paper, we present a case study of developing MVIS (Machine Vision Inspection System) designed for exterior quality inspection of stamping dies used in the production of automotive exterior components in a small to medium-sized factory. While the primary processes within the factory, including machining, transportation, and loading, have been automated using PLCs, CNC machines, and robots, the final quality inspection process still relies on manual labor. We implement the MVIS with general-purpose industrial cameras and Python-based open-source libraries and frameworks for rapid and low-cost development. The MVIS can play a major role on improving throughput and lead time of stamping dies. Furthermore, the processed inspection images can be leveraged for future process monitoring and improvement by applying deep learning techniques.