• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.350-358
• /
• 2020

Hot stamping is an effective and suitable process widely used in automotive applications, though critical issues such as the transfer of the coating materials and build-up of these materials on tool surfaces have been encountered. Past researches figured out the resultant wear phenomenon using pin-on-disc and drawing (for example, strip drawing and deep drawing) methods to mimic the process and analyzed the wear behavior with respect to the influencing factors such as surface coating, load, and roughness. Although the pin-on-disc is a conventional and widely-used method, it presented a methodological limitation when simulating the hot stamping process by forming a new blank each time, and hence, a drawing-based friction method has been proposed and developed. Each drawing method applies loads in a different way, resulting in a different wear behavior. Notably, the deep drawing process is most similar to the hot stamping process compared to other drawing methods. In this paper we present a review of the friction testing methods mimicking the hot stamping process and the associated wear behavior. This can be helpful in presenting a step-by-step approach and different perspectives on the wear behavior in the hot stamping process.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.315-322
• /
• 2001

This paper is focused on the frictionally induced thermoelastic instability (TEI) in automotive disk brakes. This instability leads to the formation of localized high temperature contact regions known as hot spots. This article investigates the themoelastic instability in automotive disk brake systems consisting of a finite thickness layer (disk) and two half-planes (pads) using a perturbation method. The antisymmetric mode involves hot spots located alternately on two sides of the disk. As a result the circumferentially periodic hot spots produce rotor surface distortion and Induce low frequency vibration. Also the effects of system parameters on the critical speed for TEI are investigated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.8-19
• /
• 2014

In this paper, a robust design of the back-plate of the brake pad to decrease the uneven wear of the pad was studied. A finite element analysis was performed to analyze the pressure distributions on the contact surfaces. Optimized back-plate shape of the brake pad was determined using the Taguchi method. The effectiveness of the robust design was clarified by the wear tests with a dynamometer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.212-217
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely train at its pre-decided position, it is necessary to combine properly the various brakes. The prototype of Korean high speed train (KHST) has been designed, fabricated and tested by the domestic researchers. It has adopted a combined electrical brakes, such as rheostatic brake, regenerative brake and eddy current brake, and mechanical brakes composed of disc brake, wheel disc brake and tread brake. In this paper, the performances and control algorithms of braking system have been reviewed by the experimental method.

• Archives of Pharmacal Research
• /
• v.3 no.1
• /
• pp.31-36
• /
• 1980

Seeds or beans of 55 plants belonging to 31 families were screened by using several different types of red blood cells to find new lectins. In this paper, white kidney been (phaseolus vulgaris C.) was chosen to study biochemical properties of hemagglutinating proteins(lectins). An anion exchanger, DEAE Sephadex A-50, and polyacrylamide disc gel electrophoresis were main techniques used. From three main fractions eluted by stepwise NaCl gradient in 25mM Tris-HCI buffer on DEAE Sephadex column, principal lectin was identified.

• Journal of Integrative Natural Science
• /
• v.4 no.1
• /
• pp.15-22
• /
• 2011

In this study, liquid with carbonized artemisia was developed for the first time that can be used as food additives and outside medicinal agents by burning artemisia species such as Artemisia dubia wall, Artemisia capillaris Thunb, Artemisia montana (Nakai) Pamp), Artemisia keiskeana Miq, Leonurus Japonicus Houtt. etc. In addition, edibility of recovered liquid with carbonized artemisia was verified by comparing the contents according to each ingredient with common refined pyroligneous liquid through the analysis of 9 kinds of organic acid by the species of artemisia, methanol and ethanol. Besides, the result of antimicrobial activities on six kinds of food spoilage and food poisoning bacteria observed by paper disc method for liquid with carbonized artemisia indicated that those two liquids showed strong antimicrobial. At the concentration of 1.5 mg/disc, clear zone for S. sonnei and S. aureus, L. monocytogenes was 13~16 mm, and they showed stronger antimicrobial activities than other strain.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.339-346
• /
• 2022

This study investigates the antibacterial and antioxidant activities of the ethanol extract of Acer tegmentosum Maxim (EATM) against Staphylococcus aureus. The total polyphenol and flavonoid content, 1,1-diphenyl-2-picryl hydrazyl (DPPH) and 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging effect, and reducing power of the ferric reducing antioxidant power (FRAP) method were measured to verify the antioxidant activity of the EATM. The antibacterial activity against S. aureus using the EATM was verified by the paper disc method, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) methods. The total polyphenol and flavonoid contents were 266.66 ㎍ GAE/mg and 6.46 ㎍ QE/mg, respectively. The DPPH and ABTS radical scavenging activity showed a concentration-dependent scavenging activity. The RC₅₀ values of the EATM were 21.49 and 12.81 ㎍/mL, respectively. A FRAP analysis was conducted for evaluating the reducing power of the EATM and an efficacy of 0.73 ± 0.19 mM FeSO₄ E/mg was observed. The antibacterial activity of EATM against S. aureus, determined using the paper disc method, showed an inhibitory ring of 3 mm at 2 mg. The MIC was confirmed at a concentration of ≥ 16 mg/mL, while the MBC was confirmed at 32 mg/mL. As the EATM shows antioxidant and antibacterial activities against S. aureus, it can be used as an effective antidote against atopic dermatitis.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.1
• /
• pp.9-18
• /
• 2018

Objectives: Pleurotus eryngii is used both for edible and medicinal purposes, and has a physiological activity. The purpose of this study is to investigate the antibacterial effect of Pleurotus eryngii against six oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Methods: The antibacterial activities of various extracts of Pleurotus eryngii were examined by disc diffusion assay and minimum inhibitory concentration (MIC). The disc diffusion assay was performed by putting a paper disc soaked in extracts on plates inoculated bacterial cultures. The MIC of these extracts was determined by using a broth microdilution assay at a concentration ranging between 0.03 mg/ml to 15.00 mg/ml. The growth inhibition effect of extracts was measured at 600 nm for 24 hrs. Results: The antibacterial activity was confirmed against all six tested bacteria at Pleurotus eryngii ethyl acetate extract by the disc diffusion method. Acetone extract showed the antibacterial activity only against 4 strains containing Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, and Actinomyces viscosus. In ethanol extract, no activity was observed against other strains except Staphylococcus aureus. MIC values of ethyl acetate extract were the same, 7.50 mg/ml in all tested bacteria. Conclusions: Pleurotus eryngii exhibited the antibacterial activity against oral pathogens (Staphylococcus aureus, Streptococcus criceti, Streptococcus mutans, Streptococcus ratti, Streptococcus sobrinus, and Actinomyces viscosus). Thus, Pleurotus eryngii may be considered as a natural antibacterial agent for treatment of dental diseases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1495-1507
• /
• 1993

In this paper, an implementation of RS (Reed-Solomon) code decoder for CDP (Compact Disc Player) using microprogramming method is presented. In this decoding strategy, the equations composed of Newton's identities are used for computing the coefficients of the error locator polynomial and for checking the number of erasures in C2(outer code). Also, in C2 decoding the values of erasures are computed from syndromes and the results of C1(inner code) decoding. We pulled up the error correctability by correcting 4 erasures or less. The decoder contains an arithmetic logic unit over GF(28) for error correcting and a decoding controller with programming ROM, and also microinstructions. Microinstructions are used for an implementation of a decoding algorithm for RS code. As a result, it can be easily modified for upgrade or other applications by changing the programming ROM only. The decoder is implemented by the Logic Level Modeling of Verilog HDL. In the decoder, each microinstruction has 14 bits( = 1 word), and the size of the programming ROM is 360 words. The number of the maximum clock-cycle for decoding both C1 and C2 is 424.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2012

In this paper, the shape design process is briefly discussed emphasizing the use of topology optimization in the conceptual design stage. The basic idea is to view feasible domains for sensitivity region concepts. In this method, the main process consists of two steps: as the design moves further inside the feasible domain using Taguchi method, and thus becoming more successful topology optimization, the sensitivity region becomes larger. In designing a double-eccentric butterfly valve, related to hydrodynamic performance and disc structure, are discussed where the use of topology optimization has proven to dramatically improve an existing design and significantly decrease the development time of a shape design. CFD analysis results demonstrate the validity of this approach.