• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.685-694
• /
• 2016

This paper presents a reliability assessment model for the power semiconductors used in wind turbine power converters. In this study, the thermal loadings at different timescales of wind speed are considered. First, in order to address the influence of long-term thermal cycling caused by variations in wind speed, the power converter operation state is partitioned into different phases in terms of average wind speed and wind turbulence. Therefore, the contributions can be considered separately. Then, in regards to the reliability assessment caused by short-term thermal cycling, the wind profile is converted to a wind speed distribution, and the contribution of different wind speeds to the final failure rate is accumulated. Finally, the reliability of an actual power converter semiconductor for a 2.5 MW wind turbine is assessed, and the failure rates induced by different timescale thermal behavior patterns are compared. The effects of various parameters such as cut-in, rated, cut-out wind speed on the failure rate of power devices are also analyzed based on the proposed model.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.33-41
• /
• 2015

Since bitmap indices are useful for OLAP queries over low-cardinality data columns, they are frequently used in data warehouses. In many data warehouse applications, the domain of a column tends to be hierarchical, such as categorical data and geographical data. When the domain of a column is hierarchical, hierarchical bitmap index is able to significantly improve the performance of queries with conditions on that column. This strategy, however, has a limitation in that when a large scale hierarchy is used, building a bimamp for each distinct node leads to a large space overhead. Thus, in this paper, we introduce the way to build hierarchical bitmap index on an attribute whose domain is organized into a large-scale hierarchy in space-constrained environments. Especially, in order to figure out space overhead of hierarchical bitmap indices, we propose the cut-selection strategy which divides the entire hierarchy into two exclusive regions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2223-2228
• /
• 2014

Available shafts with gears at each end of the cylinder-shaped steel are widely used as power train components for automobiles. In order to automate the production of a geared shaft, there are problems to be solved. After one side of the cylinder is cut in gears, one of the problems is to determine the position of the cylinder which has been already cut. The shaft is then to be fed ahead with geared position to the chuck with jaws in geared shape. The other problem is to acquire information on an angular position of the shaft to fit to the jaws of the chuck. This paper deals with the magnetic detection sensor of gear position. Coils are installed in two places. Self-inductances of coils are detected by the changes of reluctance and are then compared. The magnetic analysis also has been carried out by the finite element analysis (FEM).

• Journal of Ocean Engineering and Technology
• /
• v.22 no.2
• /
• pp.85-90
• /
• 2008

Ships in bad weather conditions are likely to be subjected to accidental loads, such as high bending moment, collision, and grounding. Once she has damage to her hull, her ultimate strength will be reduced. This paper discusses an investigation of the effect of collision damage on the ultimate strength of a ship structure by performing a series of collapse tests. For the experiment, five box-girder models with stiffeners were prepared with a cross section of $720mm\;{\times}\;720mm$ and a length of 900mm. Of the five, one had no damage and four had an ellipse shaped damage area that represented the shape of the bulbous bow of a colliding ship. The amount of damage size was different between models. Among the damaged models, the damage in three of them was made by cutting the plate and stiffener, and in one by pressing to represent collision damage. Experiments were carried out under a pure bending load and the applied load and displacements were recorded. The ultimate strength was reduced as the damage size increased, as expected. The one with the largest amount of damage had damage to 30% of the depth, and its ultimate strength was reduced by 19% compared to the undamaged one. The pressed one has higher ultimate strength than those that were cut. This might be due to the fact that the plate around the pressed damage area contributes to the ultimate strength, whereas the cut one has no plate to contribute.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• Journal of Ecology and Environment
• /
• v.32 no.1
• /
• pp.61-65
• /
• 2009

We compared two nondestructive methods for leaf area estimation using leaves of 16 common plant species classified into six types depending on leaf shape. Relatively good linear relationships between actual leaf area (LA) and leaf length (L), width (W), or the product of length and width (LW) were found for ordinary leaves with lanceolate, oblanceolate, linear and sagitttate shapes with entire margins, serrate margins, mixed margins with a entire form and shallow lobes, and ordinary incised margins. LA was better correlated with LW than L or W, with $R^2$ > 0.91. However, for deeply incised lobes, LA estimation using LW showed low correlation coefficient values, indicating low accuracy. On the other hand, a method using photographic paper showed a good correlation between estimates of area based on the mass of a cut-out leaf image on a photographic sheet (PW) and actual leaf area for all types of leaf shape. Thus, the PW method for LA estimation can be applied to all shapes of leaf with high accuracy. The PW method takes a little more time and has a higher cost than leaf estimation methods using LW based on leaf dimensions. These results indicate that researchers should choose their nondestructive LA estimation method according to their research goals.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.86-91
• /
• 2016

End milling is an important and common machining operation because of its versatility and capability to produce various profiles and curved surfaces. This paper presents an experimental study of the cutting force variations in the end milling of SM25C with HSS(high speed steel) and carbide tool. This paper involves a study of the Taguchi design application to optimize cutting force in a end milling operation. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized, given various control and noise factors, using fewer resources than a factorial design. This study included feed rate, spindle speed and depth of cut as control factors, and the noise factors were different cutting tool in the same specification. An orthogonal array of $L_9(3^3)$ of ANOVA analyses were carried out to identify the significant factors affecting cutting force, and the optimal cutting combination was determined by seeking the best cutting force and signal-to-noise ratio. Finally, confirmation tests verified that the Taguchi design was successful in optimizing end milling parameters for cutting force.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.294-306
• /
• 2019

On the basis of the Computational Fluid Dynamics technique (CFD) combined with the overlap grid method, this paper establishes a numerical simulation method to study the problem of ice-propeller interaction in viscous flow and carries out a simulation forecast of the hydrodynamic performance of an ice-class propeller and flow characteristics when in the proximity of milling-shape ice (i.e., an ice block with a groove cut by a high-speed revolving propeller). We use a trimmed mesh in the entire calculation domain and use the overlap grid method to transfer information between the domains of propeller rotation calculation and ice-surface computing. The grid is refined in the narrow gap between the ice and propeller to ensure the accuracy of the flow field. Comparison with the results of the experiment reveals that the error of the hydrodynamic performance is within 5%. This confirms the feasibility of the calculation method. In this paper, we calculate the exciting force of the propeller, analyze the time domain of the exciting force, and obtain the curve of the frequency domain using a Fourier transform of the time-domain curve of the exciting force. The existence of milling-shape ice before the propeller can greatly disturb the wake flow field. Unlike in open water, the propeller bearing capacity shows a downward trend in three stages, and fluctuating pressure is more disordered near the ice.

• The Journal of Fisheries Business Administration
• /
• v.26 no.1
• /
• pp.79-104
• /
• 1995

Dividend Policy involves the decision to pay out earnings versus retaining them for reinvestment in the firm, and dividend policy decisions can have either favorable or unfavorable effects on the attainment of firm's objective. This paper is to examine the present status of dividend policy of the Pusan Cooperative Fish Market, and to suggest the optimal dividend policy decisions appropriate for achieving its objective, which is to promote the fishermen's benefits and protect the interest of consumers. There are two types of dividend that the Pusan Cooperative Fish Market pays to the equity owners : (1) dividend on capital and (2) equalized patronage dividend. During'90s, while the rate of dividend on capital ranged from 1.7% to 2.8%, that of equalized patronage dividend ranged from 13.9% to 22.9%. Therefore, the rate of total dividend on capital including revolving funds has been about 20%, which turns out to be much higher than those of companies listed in the stock market. According to the current dividend data, the Pusan Cooperative Fish Market focuses on the equalized patronage dividend and the dividen on capital is the secondary type of dividend. In addition, the interesting feature of equalized patronage dividend is that it is supposed to be reinvested into capital by the Articles of the Fish Market, as soon as the Fish Market pays it to its members. Finally, this paper suggests the rational dividend policy of the Fish Market that is able to help its objective to be achidved more efficiently. The overall direction of the rational dividend policy can be summarized as follows ; (1) The level of cash dividend on capital should be increased enough to reflect the market interest rate. (2) The subsidy of working capital to some member fisheries cooperatives as quasi- dividend should be cut off steadily. (3) The equalized patronage dividend should be replaced by the original patronage dividend whose level is determined by the volume of each member's purchase. (4) In the long-term, it is necessary to improve the system of revolving funds in the way that revoloving funds could serve to complement equity capital for only a fixed time, after which they ard repaid to the members.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.17-21
• /
• 1997

This study was carried out to develop the manufacturing technique of Korean paper(Hanji) and find out new uses of machine-made Hanji produced on a a large scale by paper machine. Six kinds of Hanji were made and laminated with backpaper by acryl-based or vinyl acetate ethylene-based adhesive. Six kinds of wallpapers were made such as WH 1, WH 2-1, WH 2-2, WH 3-1, WH 3-2 and WH 4. Physical properties and quality test on the wallpapers were examined. Physical strength of the wallpapers was better than each strength of the Hanji and backpaper. It might be a roll of adhesive. And so, Production cost of the Hanji could be brought down if the Hanji was made thin to get strength not enough to cut during lamination of two papers(Hanji and backpaper). Hanji wallpapers of WH 3-1 and WH 4 are lower than a standard in sunlight resistance and WH 1 is in properties of opacity. WH 2-1, WH 2-2 and WH 3-2 were better than Korean standard in some quality tests. WH 2-2 and WH 3-2 were superior to other wallpapers as a whole. About, twenty kinds of wallpapers with surface treatment, are now being produced on the basis of these two types of wallpapers.