• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.34-40
• /
• 2015

The design, procurement and fabrication of FPSO project ordered by Inpex Browse, Ltd. have been currently carried out by DSME(Daewoo Shipbuilding Marine and Engineering Co.). The unit will be installed and operated in the Ichthys field offshore of North-Western Australia and there are the particular design requirements to do with performance on the environment loads corresponding to max. 10,000 years return period wave. Also, the operational life of FPSO has to be over 40 years. With this background, this paper introduces the structural design procedure of crane pedestal foundation operated in north-western Australia offshore. The design of crane pedestal foundation structure is basically based on international design code (i.e. API Spec. 2C), Classification society's rule and project specifications. The design load cases are mainly divided into the crane normal operating conditions and crane stowed conditions according to environment conditions of the offshore with 1-year, 5-year, 10-year, 200-year and 10,000-year return period wave. This design experience for crane pedestal foundation operated in north-western Australia offshore will be useful to do engineering of other offshore crane structures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.83-90
• /
• 1994

The container crane is still operated by skillfull human operators. So an automatic crane operation system is strongly required. In this paper, the digital control method is applied to position an anti-swing control for container crane. Two methods of digital optimal regulator control and digital redesign control are used for experiment. From these experimental results, it is respected that both methods can be applied effectively to an actual container crane operation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.498-504
• /
• 1998

This paper presents an optimal control algorithm for the overhead crane. To control the swing motion and the position tracking of the payload of the overhead crane a state feedback control algorithm is applied. by using a hybrid genetic algorithm the feedback gains of the state feedback is optimized to minimize the cost function composed of position errors and payload swing angle under unknown constant disturbances. Computer simulation is performed to demonstrate the effectiveness of the proposed control algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.526-529
• /
• 2002

The development of automated container terminal has been a hot issue for recent years. It's very natural because it's very important how many containers, how soon, and how precisely a container terminal can treat. A crane treats a very heavy container, maybe, no less than 20∼40 tons, thus most cranes use ropes to take up and land containers. But rope causes the sway of a container and this phenomenon is not avoided. On the ground of this, in most case how much skillful a driver is may affect the productivity of a yard or quay crane. Thus many researches have been concentrated on the development of the control algorithm for a crane which may be useful and robust enough to drive a crane without any human driver. Authors of this paper also are interested in this kind of research but we have been much more interested for years in the development of a mechanical structure which may cause much less sway than the existing cranes do. In this paper, we may introduce the basic structure of the developed anti-sway system.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.35-40
• /
• 2003

This paper presents a method for designing layout on the yard and evaluating alternative designs of the layout by applying simulation. The method is based on the concepts of the conventional port container terminal with a perpendicular yard layout. In general, yard design of the container terminal is consists of the two major parts. One is to divide yard area between the number of sections and the number of runs and the other is to decide the number of equipment that is the yard truck and yard crane. In the past days, this design was depended on the experience of the terminal operator and the structure of the conventional terminal layout because it is a very complex decision problem. In this paper we suggest the method of yard design as a conceptual procedure and estimate the efficiency of the container crane and the optimal the number of equipment using the simulation. Numerical examples are provided in order to illustrate the conceptual procedure. As the example, the suggested method and simulation are applied to the virtual container terminal with a perpendicular yard layout. In the results, the number of sections and runs on yard area, the number of yard truck per container crane and the number of yard crane per run are decided. In additional, the traffic among blocks on yard layout is estimated in terms of rate.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.192-200
• /
• 2017

With the acceleration of construction industrialization, the buildings that China has adopted the construction of industrialization technology are increasing day by day, and Precast Concrete (PC) Structure technology is one of the main technologies of construction industrialization. Compared with the traditional cast-in-place concrete structure, PC structure is more conducive to shorten the construction period, reduce the number of construction workers and the site construction waste. Nevertheless, PC structure improves the requirements of hoisting machinery in the construction site, and the lay-out and selection of hoisting machinery become an important factor influencing the construction cost. The paper regards the typical tower crane in China as the research object, and establishes the time optimization model for the lifting scheme. The influence of the different precast rate on the selection of the tower crane is analyzed. This paper obtains the time variation of the tower crane under different precast rate, provides a theoretical basis for the design of precast concrete structures under the influence of assembly construction, and lays the foundation for the selection of tower crane under the precast rate.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.315-320
• /
• 2006

Container crane in container terminal have a lot of parts, and a crane breakdown affects the productivity of terminal. In this paper, we decide Preventive Maintenance (PM) schedules for container crane in container terminals. We define structure of container crane using three model. Also we develop a simulation system and genetic algorithm for decision PM schedules based on failure and maintenance data collected from container terminal. We compare the work schedule with PM schedules of container crane, then regulate PM schedules using heuristic method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1428-1431
• /
• 1996

This paper proposes an anti-swing control law for a 2 degrees of freedom overhead crane. The dynamic model of a 2 degrees of freedom crane is highly nonlinear and coupled. The model is linearized and decoupled for each degree of freedom of the crane for small motions of the load about the vertical. Then a decoupled anti-swing control law is designed for each degree of freedom of the crane based on the linearized model. The control law consists of a position control loop and an swing angle control loop. The position loop,. is designed based on the loop shaping method and the swing angle loop is designed via the root locus method. Finally, the proposed anti-swing control law is implemented and evaluated on a 2 degrees of freedom prototype crane.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.153-158
• /
• 1998

In this paper, we present a design of optimal 2-DOF PID controller for control of gantry crane which has to control swing motion and trolley position. For tuning the parameter of 2-DOF PID controller, we used evolution strategy(ES). During operate the crane system in yard, the goal is transporting the load to a goal position as quick as possible without rope oscillation. The crane is generally operated by an expert operator, but recently an automatic control system with high speed and rapid transportation is required. However, we developed an optimal controller which has to control the crane system with disturbance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.435-442
• /
• 1997

The roof crane system is used for transporting a variable load to a target position. The goal of crane control system is transporting the load to a goal position as quick as possible without rope oscillation. The crane is generally operated by an expert operator, but recently an automatic control system with high speed and rapid tansportation is required. In this paper, we developed a simple fuzzy controller which has been introduced expert's knowledge base for anti-swing and rapid tranportation to goal position. In particular, we proposed the synthesis reasoning method which synthesizes on the basis of expert knowledge of the angle control input and position control input which are inferenced parallel and simultaneously. And we confirmed that the performance of the developed controller is effective as a result of applying it to crane simulator and also verified whether the proposed synthesis rules have been applied correctly using clustering algorithm from the measured data.