• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1415-1418
• /
• 2007

When a high voltage COS fuse becomes a short circuit by the over current, the impulse noise over 150 dB(A) with the strong pulse jet is radiated from the COS fuse of an electric transformer. For the purpose of the impulse noise reduction, in this study, a reactive type silencer with perforated panels are considered. The transmission loss of the silencer are calculated by transfer matrix method. The effect of the porosity, the distance between panels, and the number of perforated panel on the sound transmission loss is investigated and discussed.

• Journal of Sensor Science and Technology
• /
• v.26 no.4
• /
• pp.274-279
• /
• 2017

LCD(Liquid Crystal Display) panel cutting problem is a sort of two dimensional cutting stock problem. A cutting stock problem is problem that it minimizes the loss of the stock when a stock is cut into various parts. In the most research of the two dimensional cutting stock problem, it is supposed that the relative angle of a stock and parts is not important. Usually the angle is regarded as horizontal or perpendicular. In the manufacturing of polarizing film of LCD, the relative angle should be maintained at some specific angle because of the physical and/or chemical characteristics of raw material. We propose a mathematical model for solving this problem, a two-dimensional non-Guillotine cutting stock problem that is restricted by an arranged angle. Some example problems are solved by the C++ program using ILOG CPLEX classes. We could get the verification and validation of the suggested model based on the solutions.

• Journal of Sasang Constitutional Medicine
• /
• v.26 no.4
• /
• pp.365-378
• /
• 2014

Objectives This study was performed to investigate the cut-off values of abdominal circumference and Body Mass Index(BMI) according to Sasang Constitution. Methods A total of 1,773 persons, namely 440 male people and 1,333 female people, in ages from 40 to 69 years old, participated in this research. They are all included in the community based Genomic cohort in Wonju in years from 2006 to 2013. The diagnostic criteria of metabolic syndrome was used followed by the National Cholesterol Education Program in Adult Treatment Panel III (NCEP ATP III) and Asian pacific guideline for only abdominal obesity. Results The prevalence of metabolic syndrome was 34.8% for men and 37.6% for women in this research. Taeeumin was the highly significant risk type for the metabolic syndrome in both sexes. Cut-off values of abdominal circumference were 88.3 cm in men, 80.3 cm in women, and cut-off values of BMI were $24.2kg/m^2$ in men and $25.3kg/m^2$ in women. For men, cut-off values of abdominal circumference were 79.5cm in Soyangin, 88.8 cm in Taeeumin and 79.5 cm in Soeumin, and cut-off values of BMI were $23.2kg/m^2$ in Soyangin, $25.6kg/m^2$ in Taeeumin and $20.6kg/m^2$ in Soeumin. For women, cut-off values of abdominal circumference were 76.3 cm in Soyangin, 80.3 cm in Taeeumin and 76.8 cm in Soeumin, and cut-off values of BMI were $22.4kg/m^2$ in Soyangin, $24.9kg/m^2$ in Taeeumin and $21.3kg/m^2$ in Soeumin. Conclusions Although 90 cm in men, 80 cm in women as an Asian pacific guideline were regarded as quite approximate to the mean value of abdominal circumference and $25kg/m^2$ to BMI. But if the results could be allocated in terms of the Sasang constitutional method, the cut-off values for Soyangin and Soeumin should be lowered than now.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.639-647
• /
• 2002

A simplified analytical procedure is presented to estimate the reduction of elastic lateral stiffness of steel moment frames arising from the radius-cut dogbone weakening. With the original radius-cut dogbone shape, it is almost impossible or too complicated to integrate analytically the mathematical expressions encountered when applying the conjugate beam method to compute the beam deflection component. In this study, the problem is circumvented by replacing the original radius-cut dogbone with an equivalent dogbone of constant width. The equivalence between the two is established by imposing an equal dogbone elongation criterion. This approach is justified by using a calibrated finite clement analysis. Then, the elastic lateral deflection components from the column, panel zone, and beam are derived for a typical beam-column subassembly. The derived results can be used to evaluate the reduction of the frame lateral stiffness. Case studies conducted within some practical ranges of frame configurations show that the reduction in frame lateral stiffness due to the presence of dogbone cut is on the order of 1 to 2 percent and is reasonably negligible in practical sense.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4288-4295
• /
• 2011

In this paper, variable reactor and capacitor for high-frequency welder are analyzed by optimum design. As the polar panel of high-frequency welder has the role of condenser, the material with the high rate of induced electricity has to be selected in order to manufacture the condenser with the great power cut. And the area of polar panel must be large and the gap between panels must be thin. On the contrary, the resistance is generated and the heat is happened because the large current is flown. To prevent the thermal deformation of this polar panel, the temperature can be lowered by using cooling water and so on. At this point, the speed of cooling water due to deformation and temperature of polar panel can be optimized.

• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.23-28
• /
• 1998

The objective of this study was to investigate the methods of quality maintenance using modified atmosphere packaging with various quality preservatives at ambient and low temperatures. Ethylene(<1.0ppm) accumulated during modified atmosphere storage of Chinese cabbage using polyethylene film(60$\mu\textrm{m}$) caused quality deterioration such as yellowing and abscission. The addition of potassium permanganate reduced ethylene level and thus extended storage life of l00% at 20$^{\circ}C$ and 140% at 0$^{\circ}C$. To establish the storage conditions of minimally processed sit and vegetables, the experiment was conducted with various quality preservatives and packaging materials. Ceramic film(Zeolite 7%, 60$\mu\textrm{m}$) showed increasing storage life of 50%, reducing total microbial counts of 50% and keeping high appearance quality of minimally processed pears stored at 20$^{\circ}C$ and 0$^{\circ}C$. Minimally processed Chinese cabbage treated with l% CaCl2 at 20$^{\circ}C$, and 1% CaCl2 and 1% NaCl at 0$^{\circ}C$ has a longer storage life of 90% with good maketable quality. Treatment of 1% NaCl for cut Asian penis appeared increased storage life of 100%, decreased cut surface browning and the best overall acceptability by a sensory panel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1953-1958
• /
• 2012

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with such electric faults, specially short circuit faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30ms(KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problem, this paper proposes a prevention apparatus using the line voltage drop of neutral wire and some semiconductor switching devices. Some experimental tests of the proposed apparatus confirm the validity of the analytical results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.876-880
• /
• 2013

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The principal factor of the fire is electric arc or spark accompanied with such electric faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problems, this paper studies on an arc fault circuit interrupter (AFCI) using the distorted voltage wave in electric arc faults. The proposed voltage sensing type AFCI is an electrical fire prevention apparatus of new conception that operates a circuit breaker with sensing the instantaneous voltage drop of line voltage at electrical faults occurrence. The proposed AFCI is composed of control circuit topology using some semiconductor switching devices. Some experimental tests of the proposed AFCI confirm practicality and the validity of the analytical results.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.1-12
• /
• 2007

For the purpose of effective utilization of domestic second-grown larch as structural members, post and beam construction applying traditional construction to Japanese larch glulam members was adopted with processing by machine pre-cut method. In general, horizontal shear test by KS F 2154 is conducted to assess the horizontal shear properties of the wooden structure by post and beam construction. The frame was consisted of post and beam member with appropriate fasteners, and members have their own processed parts (notch, hole, etc.) that can be well-connected each other. The shear wall was consisted of the frame with screw-nail sheathed panel (OSB). The results of horizontal shear loading tests without vertical loads conducted on the frame and the shear wall structures, the maximum strengths were about 1.9 kN/m and about 9.7 kN/m, the shear rigidities were about 167 kN/rad, 8198 kN/rad, respectively. The strength proportion of the frame specimen was about 20% of the wall's and about 2% in initial stiffness. Nail failures are remarkable on the shear wall specimen with punching shears and shear failures. The shear load factor for the shear wall specimen by the method of Architectural Institute of Japan was 1.5, which was obtained by the bi-linear method. Loading method should be considered to obtain smooth load-deformation relationship. For the better shear performance of the structures, column base and post and beam connections and sheathed panel should be further examined as well.

• Composites Research
• /
• v.28 no.5
• /
• pp.291-296
• /
• 2015

In this study, structural design and analysis of the automobile bonnet is performed. The flax/vinly ester composite material is applied for structural design. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite bonnet. The VARTML is a manufacturing process that the resin is injected into the fly layered-up fibers enclosed by a rigid mold tool under vacuum. A series of flax/vinyl ester composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of the automobile bonnet is performed.