• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.568-570
• /
• 2004

This paper presents a study of a position finding system using PSD Sensor and Pan/Tilt. The position of PSD(Position Sensitive Detector) sensor is calculated by the degree of pan-tilt and the difference in height between pan-tilt and PSD. For that, the DSP which control pan-tilt is used for precise operation. The PIC microcontroller process PSD sensor data that indicate light incident position. A user using computer can acquire the conditions of pan-tilt and PSD and issue an order.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.09a
• /
• pp.39-55
• /
• 1995

Modified polycrylonitrile(PAN) membranes were prepared by emulsion or emulsifier-free emulsion polymerization technique. Separation capacity was determined at several operating temperatures(25, 40, 55 and 70 $^{\circ}$C) to dehydrate 56wt% pyridine aqueous solution through modified PAN membranes having different functional groups. All these PAN-based membranes were selective toward water to different degrees depending on the nature of functional groups present in the membranes. Pervaporation characteristics of PAN-based membranes are so different and classified into three categories depending on the type of the functional groups in PAN copolymers. Among PAN-based membranes, the in-situ complex membranes show the best separation capacity over the operating temperatures.

• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.24-30
• /
• 1983

The polarographic behavior of 1-(2-pyridylazo)-2-naphthol (PAN) in acetonitrile as an aprotic solvent has been investigated. The reduction of PAN in $10^{-2}$ molarity of tetraethyl-ammonium perchlorate acetonitrile solution proceeds along two one-electron steps to give the corresponding hydrazo compound. Every reduction wave was diffusion controlled and considerably reversible. The reduction mechanism of PAN in acetonitrile is estimated as follows;

• Carbon letters
• /
• v.16 no.3
• /
• pp.219-221
• /
• 2015

In order to study the impact of atmosphere during electron beam irradiation (EBI) of polyacrylonitrile (PAN) precursor fibers, the latter were stabilized by EBI in both air and oxygen atmospheres. Gel-fraction determination indicated that EBI-stabilization under an oxygen atmosphere leads to an enhanced cyclization in the PAN fibers. In the Fourier-transform infrared spectroscopy analysis, the PAN fibers stabilized by EBI under an oxygen atmosphere exhibited a greater decrease in the peak intensity at 2244 cm⁻¹ (C≡N vibration) and a greater increase in the peak intensity at 1628 cm⁻¹ (C=N absorption) than the corresponding PAN fibers stabilized under an air atmosphere. From the X-ray diffraction analysis it was found that oxygen uptake in PAN fibers leads to an increase in the amorphous region, produced by cyclization.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.9
• /
• pp.883-892
• /
• 1991

This paper presnets the characteristics of electropolymerization and electrochemicla propoerties of polyaniline(PAn). From the morphology study on the PAn surface, it seems that coagulation of the fibrils on the surface proceeds as the PAn grows, resulting in fibril clusters with new branches and more extensive voids. While PAn/Li cell is cycled at potential range between 2.9V and 3.7V in which the first strong reduction peak of 2.75V does not appear, its oxidation reduction capacities were increased up to about tenth cycle. Electricity efficiency of stable charge-discharge to deep discharge in PAn/Li cell was 42.9%. Average charge potential, avergae discharge potential, energy density, and charge-discharge energy efficiency of the PAn/Li cell were 3.4V, 3.25V, 132.9Wh/kg, and 95.6%, respectively.

• Textile Coloration and Finishing
• /
• v.4 no.4
• /
• pp.90-96
• /
• 1992

In the PAN-based ACF manufacturing system stabilization step was improved with chemical treatment (preoxidation) in order to yield higher carbon content and to avoid excessive fragmentation during carbonization and activation process. The optimal condition of preoxidation was at 18$0^{\circ}C$ for 4 minutes in sodium glyceroxide in glycerine (concentration of NaOH was 0.02 meq/g). To investigate low temperature stabilization effect, preoxidized PAN fiber heated 22$0^{\circ}C$ to 26$0^{\circ}C$ as a function of treatment time and oxidative gas atmosphere, and analysed by infrared spectrum and TGA. As a results of IR and TGA, it was clear that impregnated[preoxidative] PAN had 14% higher residual than untreated PAN at 100$0^{\circ}C$ and the optimal condition of stabilization was at 26$0^{\circ}C$ for 3.5 hours within $N_2$ atmosphere.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.374-377
• /
• 1999

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li polymer battery. This paper describes temperature dependence of conductivity, impedance spectroscopy, electrochemical properties of PVDF/PAN electrolytes as a function of a mixed ratio. PVDF/PAN based polymer electrolyte films were prepared by thermal gellification method of preweighed PVDF/PAN, plasticizer and Li salt. The conductivity of PVDF/PAN electrolytes was 10-3S/cm. 20PVDF5PANLiCIO$_4$PC$\sub$10//EC$\sub$10/ electrolyte shows the better conductivity of the others. 20P7DF5PANLiCI$_4$PC$\sub$10//EC$\sub$10/ electrolyte remains stable up to 5V vs. Li/Li$\^$+/. Steady state current method and ac impedance used for the determination of transference numbers in PVDF/PAN electrolyte film. The transference number of 20PVDF5ANLICIO$_4$/PC $\sub$10//EC$\sub$10/ electrolyte is 0.48

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.487-490
• /
• 2000

The purpose of this study is to research and develop conducting polymer(CP) composite electrode for supercapacitor. Electrochemical capacitor(supercapacitor) cell of CP composite electrode with 1M LiClO$_4$PC bring out good capacitor performance below 4V. The radius of semicircle of CP composite cell with PAn composite electrode adding l5wt%SP270(PAnS15) and PT composite electrode adding 50wt%SP270 (PTS50) was absolutely small. The total resistance of supercapacitor cell mainly depended on internal resistance of the electrode. The discharge capacitance of supercapacitor cell with PTS50(+)/PAnS15(-) in 1st and 20th cycles was 38F/g and 28F/g at current density of 1mA/cm$^2$. Supercapacitor cell with PTS50(+)/PAnS15(-) showed good capacitance and stability with cycling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.615-618
• /
• 2009

2 axis Pan-tilt had been developed and utilize by vessel for the purpose of motion characteristic measurement. Besides, it also use to analysis structural design and fabrication. Test procedure had been created to produce most optimal design and to show the Nano Driving precision result performance.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.1-11
• /
• 2004

PAN-4A composite ion exchanger was more selective for Sr ion than other cations and PAN-KCoFC composite ion exchanger has much higher ion exchange capacity for Cs ion than other cations. The ion exchange capacities obtained from Dubinin-Polanyi equation were 3.93 meq/g for Sr ion and 1.50 meq/g for Cs ion using PAN-4A and PAN-KCoFC ion exchangers, respectively. The modified Dubinin-Polanyi model fit the experimental data accurately in multi-component system. The effective surface diffusivities $(D_{s, cff})$ for Sr and Cs ions of PAN-4A and PAN-KCoFC ion exchangers were slightly increased with the different particle sizes.