• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.314-320
• /
• 1997

We have observed the orientation behavior of acicular iron oxides in magnetic layer of the particular magnetic tape after magnetic paint was coated on polyester film. As results of the static orientation, orientation of iron oxides come to the maximum at the front and the back of orientation magnets, but it was a litter lower at the back than at the front, and it slowly decreases and come to the constant level after passing through the orientation magnets. In case of edge portion to be futher away from center in the coated film, the orientation of iron oxides in magnetic layer come to worse than that of the center. We think it is owing to the shape and the magnetic magnitude of orientation magnets. The results of the dynamic orientation are as follows. As the orientation of iron oxides in the particulated magnetic tape is higher, the output properties of tape come to better than ever. And the orientation of iron oxides can be changed by drying condition, as result, the output properties of tape can be also. Therefore we think the considrations of the design of orientation magnets and the control of drying condition are needed to improve output properties of the particulated magnetic tape.

• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.767-774
• /
• 2008

This study was carried out to evaluate the characteristics of atmospheric concentrations of volatile organic compounds(VOCs) and aldehydes for near a large shipyard. Most of the painting work in marine coating is performed indoor and outdoor. Most of the VOCs are emitted to the atmosphere as the paint is applied and cures. The massive scale of a ship makes it difficult to capture the emissions from outdoor painting. The VOCs are an important health and contributors to photochemical smog. The VOCs and aldehydes samples were collected using adsorbent tube and 2,4-DNPH cartridge, and were determined by an automatic thermal desorption coupled with GC/MS and HPLC-UV analysis, respectively. A total of 16 aromatic VOCs and 12 aldehydes of environmental concern were determined. At indoor coating facilities, the most abundant compound among 16 target VOCs appeared to be m,p-xylene, being followed by o-xylene. But most of the aldehydes were extremely lower concentrations. The atmospheric concentration of VOCs, m,p-xylene concentrations were the highest and the mean value were outdoor workshop 11.323 ppb, residental area 5.134 ppb, and green area 2.137 ppb, respectively. However, the most aldehydes were extremely lower concentrations such as formaldehyde, acetaldehyde and non-detection such as iso-valeraldehyde, n-valeraldehyde and o-tolualdehyde.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.349-352
• /
• 2006

The conventional segregated finite element formulation produces a small and simple matrix at each step than in an integrated formulation. And the memory and cost requirements of computations are significantly reduced because the pressure equation for the mass conservation of the Navier-Stokes equations is constructed only once if the mesh is fixed. However, segregated finite element formulation solves Poisson equation of elliptic type so that it always needs a pressure boundary condition along a boundary even when physical information on pressure is not provided. On the other hand, the conventional integrated finite element formulation in which the governing equations are simultaneously treated has an advantage over a segregated formulation in the sense that it can give a more robust convergence behavior because all variables are implicitly combined. Further it needs a very small number of iterations to achieve convergence. However, the saddle-paint-type matrix (SPTM) in the integrated formulation is assembled and preconditioned every time step, so that it needs a large memory and computing time. Therefore, we newly proposed the P2PI semi-segregation formulation. In order to utilize the fact that the pressure equation is assembled and preconditioned only once in the segregated finite element formulation, a fixed symmetric SPTM has been obtained for the continuity constraint of the present semi-segregation finite element formulation. The momentum equation in the semi-segregation finite element formulation will be separated from the continuity equation so that the saddle-point-type matrix is assembled and preconditioned only once during the whole computation as long as the mesh does not change. For a comparison of the CPU time, accuracy and condition number between the two methods, they have been applied to the well-known benchmark problem. It is shown that the newly proposed semi-segregation finite element formulation performs better than the conventional integrated finite element formulation in terms of the computation time.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2008

In the first part of the paper, Computational Fluid Dynamics analysis of the combusting flow within a high-swirl lean premixed gas turbine combustor and over the $1^{st}$ row nozzle guide vanes is presented. In this analysis, the focus of the investigation is the fluid dynamics at the combustor/turbine interface and its impact on the turbine. The predictions show the existence of a highly-rotating vortex core in the combustor, which is in strong interaction with the turbine nozzle guide vanes. This has been observed to be in agreement with the temperature indicated by thermal paint observations. The results suggest that swirling flow vortex core transition phenomena play a very important role in gas turbine combustors with modern lean-premixed dry low emissions technology. As the predictability of vortex core transition phenomena has not yet been investigated sufficiently, a fundamental validation study has been initiated, with the aim of validating the predictive capability of currently-available modelling procedures for turbulent swirling flows near the sub/supercritical vortex core transition. In the second part of the paper, results are presented which analyse such transitional turbulent swirling flows in two different laboratory water test rigs. It has been observed that turbulent swirling flows of interest are dominated by low-frequency transient motion of coherent structures, which cannot be adequately simulated within the framework of steady-state RANS turbulence modelling approaches. It has been found that useful results can be obtained only by modelling strategies which resolve the three-dimensional, transient motion of coherent structures, and do not assume a scalar turbulent viscosity at all scales. These models include RSM based URANS procedures as well as LES and DES approaches.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.511-519
• /
• 2003

The traditional culture has been developed for a long time with an unique property according to folk character, custom and environment within an area. Especially in 1906, when the westerners were interested in oriental cultures more and more, Paul Poiret presented Japanese traditional dress of napping sleeve coats and harem pants, henceforth japanese fashion theme began to rise. The Japanese style rose as an important fashion item of the modern fashion, with various fashion themes such as orientalism, ethnic, folklore, ecology, etc., needless to say of activities of Japanese designers. The revealed patterns on Japanese dress and it's ornament plays a role of expressive decoration as well as stand for the nation, the ideology of the age and aesthetic consciousness. For this reason, it is necessary to study Japanese traditional patterns expressed in modern fashion systematically. Therefore, in this research, the demonstrated Japanese traditional patterns on the modern fashion were divided into natural, artificial and complex design and were looked out the characteristic, furthermore it was studied in regard that Japanese patterns were how to apply in modern fashion. It was concluded that the characteristics of the Japanese traditional patterns presented in the modern fashion were as follows: first, creation of environmental friendly design using plenty of natural materials; second, expression of paint-like impression and beauty of margins by simplifying of patterns; third, expression of amusing design by using bright colors and print; finally, various patterns were spreaded out complicated on dress. The characteristics of Japanese traditional patterns in the above were expressed in the modern fashion.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.6
• /
• pp.654-661
• /
• 2005

Copper is a well known alloying element that is used to improve the resistance to general corrosion of stainless steel And also Cu cation have the anti-fouling effect to inhibit adhesion of the marine algae and shellfish to the surface of heat exchanger cooling pipe or outside wall of the ship, Therefore there are some anti-fouling methods such as anti-fouling Paint mixed with copper oxide or MGPS(Marine Growth Preventing System) by using Cu cation dissolved to the sea wather solution. Cu cation can be dissolved spontaneously by galvanic current due to Potential difference between Cu and cooling pipe of heat exchanger with Ti material, which may be one of the anti-fouling designs. In this study the effect of annealing heat treatment to galvanic current and Polarization behavior was investigated with a electrochemical points of view such as measurement of corrosion Potential, anodic polarization curve. cyclic voltammetric curve, galvanic current etc The grain size of the surface in annealed at $700^{\circ}C$ was the smallest than that of other annealing temperatures. and also the corrosion Potential showed more positive potential than other annealing temperatures. The galvanic current between Ti and Cu with annealed at $700^{\circ}C$ was the largest value in the case of static condition. However its value in the case of flow condition was the smallest than the other temperatures. Therefore in order to increase anti-fouling effect by Cu cation, the optimum annealing temperature in static condition of sea water is $700^{\circ}C$, however non- heat treated specimen in the case of flow condition may be desirable.

• Journal of the Korean Society of Costume
• /
• v.37
• /
• pp.231-252
• /
• 1998

Since the costume directly express human mental and emotional status, colors of costume can be valuable data to grasp the spirit of the times. Black is noticeably used in modern fashion and the study for black costume is very useful to understand modern fashion. There-fore the study mainly approaches the black costume, finding its background of appearance and symbolism, reviews the symbolism and formality of black expressed in the field of paint-ing and design beyond the fashion, and compar-es to fashion. The study result of the thesis is as follows ; First, black as a color is a one to light other neighboring colors, while it is a static, con-tractible and outstandigly attractived color. Second, black color traditionally symbolizes death, earth, air, North and inferior level and in the painting, it symbolized death, despair, fantastic world and the expression of pent-up self, while cities have been symbolized in the black printing in modern times. In the design, black has appeared with the industrial society, which symbolizes functionality and modernity. Third, black in the fashion design was symbolized death, sternness simplicity, modernity, sex, resistance and so on. Death became conspicious by a religious factor since the old times, sternness was influenced by Spanish fashion in the 16th century, simplicity by Dutch fashion in the 17th century and modernity by Baudelaire dandyism and Chanel little black dress, while sex and resistance were urged to the modern times by teenage inferior culture and stickiness to sex. Fourth, the formative features of black costume prefer simplicity, tightness and bareness in form, and in material, usually used glancing materials changed by the effect of light, lace, see-through fabric and matte one with depth. As a result, the black color is summarized to symbol death, expression of self and modernity. It is not a color of emotion but of mentality and artificial one against nature. Black color in fashion gets a strong power to express self in the symbolic aspect and draws a higher attention on human body than the fashion itself. By these features, black costume will be continuously prefered in spite of changes of the fashion.

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.251-257
• /
• 1996

A coercivity of barium ferrite (BaM) tape was found to be higher than the coercivity of BaM powder, This difference is in the range of 50 Oe to 600 Oe, which depends on substituted cations. physical properties of powder, and preparation conditions of the tape. The coercivity difference is attributed to both particle stacking and adsorption of organic solvent on particle surface. Regardless of substituted cations, the coercivity of longitudinally oriented BaFe tape was higher than that of BaM powder by a range of 100 Oe to 120 Oe, which is caused by particle stacking' During the active adsorption process on preparation of magnetic paint, where MEK (methyl ethyl ketone), TOL (toluene) and CHO (cyclohexanone) were used, chemisorption of solvents on the surface of substituted BaFe particle occurred to form polymeric compounds surrounding the particle. An increase in coercivity, caused by the solvent adsorption, was significant for Co-substutited BaM tape. Among these solvents CHO was the most effective one in increasing the coercivity of the Co-Ti substituted BaM tape.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.32-37
• /
• 2008

A series of UV-curable powder coatings with different contents of photoinitiator (0.5 wt%, 1 wt%, 2 wt%) were formulated and measured gel content, tensile strength of cured film. Heat-sensitive substrates such as MDF, plywood and PVC were coated UV-curable powder and cured coatings were measured physical properties by pendulum hardness tester, glossmeter, pull-off adhesion tester. With increasing photoinitiator content, adhesion force between coating and substrate decreased because of crosslinking density increasing. The results of pendulum hardness was not significantly changed but gloss was changed according to different substrates. Adhesion of UV-curable coatings was enough to apply for heat-sensitive substrates. From these results, we concluded that contents of photoinitiator was a effective factor in UV-curable powder coatings. UV-curable coatings was a portential candidate for heat-sensitive substrates.

• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.290-300
• /
• 2011

Objectives: There is limited data regarding the toxicity of methylcyclohexane, despite its wide use in rubber adhesives, paint diluents, and cleansing agents. This study aimed to verify the toxicity and influence on the reproductive system of methylcyclohexane after its repeated injection in Sprague Dawley (SD) rats. Methods: Methylcyclohexane was injected subcutaneously into male and female SD rats once a day, five times a week, for 13 weeks at different doses (0, 10, 100, and 1,000 mg/kg/day) for each group. The toxicity of testing material was verified by observing the change in body and organ weight, hematological change, pathological findings, and effect on the reproductive system at each different concentration. Results: In the 1,000 mg/kg/day group, there were cases of animal deaths. In animals that survived, hematological changes, including a decrease in the red blood cell count, were observed. A considerable weight gain or loss and pathological abnormalities in the liver, kidney, and other organs were found. However, the 10 and 100 mg/kg/day groups did not cause deaths or other specific abnormalities. In terms of reproductive toxicity, there were changes in hormone levels, including a significant decrease in hormones such as estradiol and progesterone (p < 0.001) in male animals. Menstrual cycle change for female animals did not show concentration dependency. Conclusion: When injected repeatedly for 13 weeks, methylcyclohexane proved to be toxic for the liver, heart, and kidney at a high dose. The absolute toxic dose was 1,000 mg/kg/day, while the no observed adverse effect level was less than 100 mg/kg/day. The substance exerted little influence on the reproductive system.