• Resources Recycling
• /
• v.28 no.2
• /
• pp.31-39
• /
• 2019

The pelletizing of printed circuit board (PCB) sludge was researched for copper recovery in pyrometallurgical process. This pelletizing was carried out by using self-manufactured compression-type apparatus after pre-treatments (drying, water scrubbing, size classification) were proceeded. The physical properties (compression strength and drop-breakage test) were tested with a change of sludge sizing and the number of compression. In the case of using the undersized sludge of #140, its properties were improved to 0.6 MPa and 9.3 times. Moreover, they increased to 0.82 MPa and 19.0 times by using the #140 ~ 325 sludge. These imply that the packing density increases due to the elimination of large-sized sludge (#140), and also the weight of required binder decreases by the removal of fine-sized sludge (#325).

• Journal of Trauma and Injury
• /
• v.34 no.1
• /
• pp.39-43
• /
• 2021

Purpose: Determining appropriate ways to assess health care quality within the National Health Insurance System is of interest to both the Korean government and the medical community. However, in the trauma field, the number of indicators used to evaluate surgical quality is limited. Using data collected over 5 years at Wonju Severance Christian Hospital Trauma Center in Korea, this study aimed to determine whether the unplanned reoperation rate in the field of trauma surgery could be used to assess the quality of an institution's surgical care. Methods: In total, 665 general surgical procedures were performed at the Trauma Center in 453 patients with abdominopelvic injuries from January 2015 to December 2019. Data were collected from the Trauma Center's data registry and medical records, and included information regarding patients' demographic characteristics, the type of index operation, and the reason for unplanned reoperations. Results: A total of 453 index operations were evaluated. The proportion of patients with an Injury Severity Score (ISS) >15 was 48-70% over the 5-year period, with an unplanned reoperation rate of 2.1-9.3%. Patients had an average ISS score of 17.5, while the average Abbreviated Injury Scale Score was 2.87. Unplanned reoperations were required in about 7% of patients. The most common complications requiring reoperation were recurrent bleeding (26.9%), wound problems (26.9%), intestinal infarction (15.4%), and anastomosis site leakage (7.7%). The procedures most frequently requiring unplanned reoperations were bowel surgery (segmental resection, primary repair, enterostomy, etc.) (24.5%) and preperitoneal pelvic packing (10.6%). Conclusions: The proportion of reoperations was confirmed to be affected by injury severity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.102-110
• /
• 2022

Objectives: The purpose of this study is to analyze the content of N,N-dimethylformamide(DMF) in polyurethane coated gloves(PU-gloves) and to assess the dermal exposure generated by wearing them. Methods: We analyzed the concentrations of DMF in 12 gloves by EN16778 standard. The samples cut into pieces of about 10 by 10 mm and extracted with methanol in flask in an ultrasonic bath at 70℃. An aliquot of the extract is analyzed with GC-MS. The dose of dermal exposure was calculated by ECETOC TRA consumer 3.1 and compared with derived no effect level(DNEL) for systemic effects due to long term exposure by workers. The extracted amount of DMF by saline solution was compared with that by EN16778 standard. Results: The mean concentration of DMF in PU-gloves was 1,377 mg/kg(range 13~3,948 mg/kg). The concentration of DMF showed significantly differences by packing type, manufacturer, and price(p<0.05). The dose of dermal exposure was 0.0007~0.572 mg/kg body weight/day when the DMF content was 10~4,000 mg/kg. The DMF extracted by saline solution was around 11% for 8 hours. Conclusions: The risk of dermal exposure due to the residual DMF in the PU-gloves was not signifiant. But, the limit of 1,000 mg/kg in PU-gloves can be recommended for international standard and trading systems.

• Journal of Chest Surgery
• /
• v.56 no.3
• /
• pp.206-212
• /
• 2023

Background: Delayed sternal closure (DSC) is a useful option for patients with intractable bleeding and hemodynamic instability due to prolonged cardiopulmonary bypass and a preoperative bleeding tendency. Vacuum-assisted closure (VAC) has been widely used for sternal wound problems, but only rarely for DSC, and its efficacy for mediastinal drainage immediately after cardiac surgery has not been well established. Therefore, we evaluated the usefulness of DSC using VAC in adult cardiac surgery. Methods: We analyzed 33 patients who underwent DSC using VAC from January 2017 to July 2022. After packing sterile gauze around the heart surface and great vessels, VAC was applied directly without sternal self-retaining retractors and mediastinal drain tubes. Results: Twenty-one patients (63.6%) underwent emergency surgery for conditions including type A acute aortic dissection (n=13), and 8 patients (24.2%) received postoperative extracorporeal membrane oxygenation support. Intractable bleeding (n=25) was the most common reason for an open sternum. The median duration of open sternum was 2 days (interquartile range [25th-75th pertentiles], 2-3.25 days) and 9 patients underwent VAC application more than once. The overall in-hospital mortality rate was 27.3%. Superficial wound problems occurred in 10 patients (30.3%), and there were no deep sternal wound infections. Conclusion: For patients with an open sternum, VAC alone, which is effective for mediastinal drainage and cardiac decompression, had an acceptable superficial wound infection rate and no deep sternal wound infections. In adult cardiac surgery, DSC using VAC may be useful in patients with intractable bleeding or unstable hemodynamics with myocardial edema.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.60-65
• /
• 2004

120 samples of ready-to-eat salad product were purchased at department stores, marts and family restaurants in metro area. Coliform bacteria and food borne pathogenic bacteria were isolated from these samples. In 73 samples among the 120 salad product samples, coliform bacteria and food borne pathogenic bacteria were detected by 60.8％ of isolated rate. Salad were classified into organic and non-organic salad. According to a salad type, salad were classified into vegetable salad and mixed vegetable salad with fried chicken and extra food. According to a packing type, packed salad product and salad-bar product were classified. After the classification, the results of each cases were compared. There is no statistical relation between cultivation or packing methods and contaminated bacteria. But the incidence number of microbial strains was significantly different between vegetable salad and mixed vegetable salad(p＜0.005). In vegetable salad, more various strains were detected. E. coli was isolated in 10 cases among the 90 cases in non-organic vegetable and in 7 cases among the 30 cases in organic salad. Food borne pathogenic bacteria were isolated in non-organic vegetable salad product. Staphylococcus aureus was isolated in 4 cases of vegetable salad product and Salmonella spp. isolated in 1 case. After 5 times examination of each 4 market products, the total number of aerobic bacteria was average 4.8$\pm$0.19 log cfu/g. One sample from this product, saline and a detergent for vegetable were used for 3 minutes to notice the effect. As a result, when saline was used 5 times and detergent for vegetable was used 1 time, bacterial contamination was decreased up to 95.5％.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.154-201
• /
• 2016

During the Incipient and Early Silla phases, which witnessed the establishment and development of the ancient Silla state, the Wolseong North Burial Ground functioned as not only the central burial ground in the Gyeongju region of the capital of Silla but also as the central burial ground of the whole Silla state. Wolseong North Burial Ground is where transformations in Silla funerary architecture first occurred. As such, an empirical study of the tombs constructed at this burial ground can be regarded as a starting point from which an understanding of the development of the tomb culture of the Silla state may be achieved. This paper therefore aims to examine the changing nature of the tomb culture of the Early Silla phase through the burial data of Wolseong North Burial Ground and the Gyeongju region. Wooden chamber tombs were constructed from the late phase of Saroguk. At Wolseong North Burial Ground, which eventually developed into the central burial ground of the Gyeongju region, wooden chamber tombs embellished with stone packing emerged during the Incipient Silla phase; wooden chamber tombs with stone mounds, on the other hand, first appeared in the Early Silla phase and eventually became established as the central tomb type. A key difference between the wooden chamber tomb embellished with stone packing and the wooden chamber tomb with stone mound is that, in the case of the latter, stones were packed not only around sides of the wooden structure that acted as the burial chamber but also on top of this structure. The addition of a high earthen mound surrounded by protective ring of stones is another distinctive feature of the latter, presenting a contrast to the low mound of the former. During the Early Silla phase, two types of wooden chamber tombs with stone mounds were constructed at Wolseong North Burial Ground: those with burial chambers located above ground and those with subterranean burial chambers. Also constructed during this phase were the wooden chamber tomb embellished with packed stones, the wooden chamber tomb embellished with packed clay, simple earth cut burials, which had been used since the Incipient Silla phase, as well as the stone-lined burials with vertical entrance which first appeared in the Early Silla phase. However, of these different types of burials, it was only the wooden chamber tomb with stone mound that was covered with a 'high mound.' Differentiation between the different tomb types can also be observed in terms of location, type of burial chamber used, construction method, and tomb size. It is therefore possible to surmise that stratification between the different tomb types, which first emerged in the Incipient Silla phase, became intensified during the Early Silla phase.

• Journal of Environmental Policy
• /
• v.10 no.4
• /
• pp.39-59
• /
• 2011

In this article, I would like to analyze the conditions in applying the LCC method for each construction type by selecting 10 apartment complexes among the Turn-key projects which have been ongoing for the last 5 years. In addition, this article will identify the problems to the application of double landscape architecture and suggest improvement measures. Among the 10 case targets, a total of 151 LCC analyses were conducted, and the average application ratio placing for each construction type was shown in the following order: architecture (34.4%)> electricity (21.2%)>machine (18.5%)>civil engineering (13.2%)>landscape architecture (12.6%). As numbers show, landscape architecture was the lowest. The ratio of LCC reduction amount was shown in the following order: machine (32.1%)> architecture (23.9%)>electricity (23.4%)>civil engineering (17.5%)>landscape architecture (3.1%). The field of landscape architecture had a reduction amount that was about 5 to 6 times lower than civil engineering which had a similar number of LCC analysis cases. The total LCC analysis items of landscape architecture was 19, including 15 double packing material, 1 building covering, 1 grass planting, 1 planting infrastructure, and 1 facility. The following measures were suggested to promote LCC analysis in landscape architecture: first, set an analysis item that considers the construction expense ratio of landscape architecture; second, legal regulation of landscape architecture and expansion of its application; third, prepare VE/LCC standards which are suitable for landscape architecture.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.444-449
• /
• 2019

The "Standard on Cargo Stowage and Securing" implemented to safely stow and secure the cargo of international shipping vessels and domestic car ferries, has also been applied to general cargo ships transported between domestic ports since J anuary 2018. As a result, a new type of cargo, such as a non-standardized steel box transported by general cargo ships to major ports in Korea from Jeju Island in Korea, must be factored as the method of safe stowage and securing according to the legal classification of cargo. This study analyzed the legal status of a steel box by analyzing the actual size, shape of steel box through field verification, collection of data from relevant agencies and finally proposed the methods of safe stowage and securing for a steel box in the cargo holds of general cargo ships. According to the relevant domestic laws and international regulations, steel boxes could be classified as pallette boxes with protective outer packing, a type of non-standardized cargo. Additionally, when a steel box is loaded into the cargo hold of general cargo ships, a method of loading and transporting them must be factored so that there is no gap in the cargo hold of ships. Verification of the safety of the tightly loading and transportation measures in the reviewed cargo hold was verified through safety of the hull structure and securing of the ship's stability. As a result of verification of the safety of the hull structure, the value of the structural strength on both sides and the floor of the cargo hold for the total weight of cargo that can be loaded in the cargo hold was satisfied, and the value of the ship's stability was satisfied with the value of GoM and the restoration of the three cross-sectional stability curve areas.

• The KIPS Transactions:PartA
• /
• v.18A no.3
• /
• pp.99-108
• /
• 2011

Processor technology is currently continued to parallel processing techniques, not by only increasing clock frequency of a single processor due to the high technology cost and power consumption. In this paper, a SIMD (Single Instruction Multiple Data) based parallel processor is introduced that efficiently processes massive data inherent in multimedia. In addition, this paper proposes pixel subword parallel processing instructions for the SIMD parallel processor architecture that efficiently operate on the image and video pixels. The proposed pixel subword parallel processing instructions store and process four 8-bit pixels on the partitioned four 12-bit registers in a 48-bit datapath architecture. This solves the overflow problem inherent in existing multimedia extensions and reduces the use of many packing/unpacking instructions. Experimental results using the same SIMD-based parallel processor architecture indicate that the proposed pixel subword parallel processing instructions achieve a speedup of $2.3{\times}$ over the baseline SIMD array performance. This is in contrast to MMX-type instructions (a representative Intel multimedia extension), which achieve a speedup of only $1.4{\times}$ over the same baseline SIMD array performance. In addition, the proposed instructions achieve $2.5{\times}$ better energy efficiency than the baseline program, while MMX-type instructions achieve only $1.8{\times}$ better energy efficiency than the baseline program.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.225-233
• /
• 2003

The goal of a radiation treatment plan is to deliver a homogeneous dose to a target with minimal irradiation of the adjacent normal tissues. Dose uniformity is especially important for stereotactic radiosurgery using a linear accelerator. The dose uniformity and high dose delivery of a single spherical dose distribution exceed 70％. This also results with a similar stereotactic radiosurgical plan using a Gamma Knife. The dose distribution produced in a stereotactic radiosurgical plan using a Gamma Knife and Linear accelerator is spherical, and the application of the sphere packing arrangement in a real radiosurgical plan requires much time and skill. In this study, we found a characteristic of dose distribution with transformation of beam parameters that must be considered in a radiosurgical plan for effective radiosurgery. First, we assumed a cylinder type tumor model and a cube type tumor model. Secondly, the results of the tumor models were compared and analyzed with dose profiles and DVH_(Dose Volume Histogram) representative dose distribution. We found the optimal composition of beam parameters_(i.e. collimator size, number of isocenter, gap of isocenters etc.), which allowed the tumor models to be involved in the isodose curve at a high level. In conclusion, the characteristics found in this study are helpful for improving the effectiveness and speed of a radiosurgical plan for stereotactic radiosurgery.