• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.4
• /
• pp.28-35
• /
• 2007

Currently, most of all valves using at the semiconductor & LCD manufacturing process are packless type. Such valves are needed to have the functions to protect perfectly from the leakage of fluid by using bellows and diaphragm instead of the grand packing. But not only those valves made in Korea are not available at this point, but also advanced foreign manufacturers do not open enough their data on the basic technology. Otherwise although they open the data a little, they are almost data about stainless steel for pneumatic valves. In this paper, it was focused on the fluid valves for chemical & DI water based on the data of steel valves which are already using commercially. And also this study concentrated to collect the basic developing data of Eco-On/Off diaphragm valve by ourselves.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.83-91
• /
• 2018

Various systems for simulating particulate matter are developed and used in concrete technology for producing virtual cementitious materials on the different levels of the microstructure. Basically, the systems can be classified as two distinct families, namely random sequential addition systems (RSAs) and discrete element methods (DEMs). The first type is hardly being used for this purpose outside concrete technology, but became popular among concrete technologists. Hence, it is of utmost relevance to compare the two families in their capabilities, so that the reliability of produced data can be estimated. This paper pursues to do this on the basis of earlier published material of work performed by a succession of PhD students in the group of the second author. Limited references will be given to external sources.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.127-133
• /
• 2000

The incomplete treatment of the swinery wastewater is one of the major factors of the river contamination resulting from an eutrophication. Even through many treatments were considered to reduce the contamination of the river by the swinery wastewater, the most effective treatment was not developed yet. Therefore, this project was focused on the development of the treatment that was a low cost and a high efficiency using a steel-making slag. The swinery wastewater was passed through a U-type tube packing the slag in the laboratory. And the swinery wastewater was cleaned effectively in the laboratory experiment. Based on these laboratory results, the treatment facility in a stock farm was constructed to confirm the effect of slag on the first-treated swinery wastewater. After the treatment of the first-treated swinery wastewater through the slag, the water quality of the river was improved and the biodiversity was increased.

• Korean Journal of Veterinary Research
• /
• v.47 no.1
• /
• pp.91-94
• /
• 2007

tisue disease of dog and cat, resembling Ehlers-Danlos syndrome (EDS) in man. EDS is characterizedby loose, hyperextensible and, fragile skin, it is attributed to mutations in connective tisue gene. Thesemutations cause defects in type I or II collagen synthesis and as a result lack of strength or elasticityto skin, joint, ligament and vessels. EDS-affected animals often experience subcutaneous hematomas thathave long bleeding times. The 4-years old male Yorkshire terrier was evaluated because of subcutaneoushematoma after stifle surgery. Clinical examination revealed a thin and hyperextensible skin and jointlaxity. The degree of skin extensibility index was 23.4%, marked skin stretchy. Clinical diagnosis wasconfirmed by histophathological examination of a skin biopsy revealing reduced packing density ofcollagen fiber of skin.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.259-264
• /
• 2005

The shrinkage of the product in injection molded part occurs due to the volume change with variation of temperature and pressure and is influenced by the processing conditions of injection molding. Mold designers greatly concerns the shrinkage of parts for a high dimensional accuracy. In this study, bar type HIPS specimen with 15x19 grid on the surface was tested. The amount of shrinkage of flow and transverse directions was examined with respect to the injection molding conditions such as melt temperature, injection speed, holding pressure, mold temperature and cooling time. As the packing pressure increased, the difference of shrinkage of both directions is decreased and the absolute shrinkage value also decreased.

• Corrosion Science and Technology
• /
• v.5 no.1
• /
• pp.15-22
• /
• 2006

The introduction of two-grid inside a conventional process system produces a reactive coating deposition and increases metal ion ratio in the plasma, resulting in denser and smoother films. The corrosion behaviors of TiN coatings were investigated by electrochemical methods, such as potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in deaerated 3.5% NaCl solution. Electrochemical tests were used to evaluate the effect of microstructure on the corrosion behavior of TiN coatings exposed to a corrosive environment. The crystal structure of the coatings was examined by X-ray diffractometry (XRD) and the microstructure of the coatings was investigated by scanning electron microscopy (SEM) and transmission electron spectroscopy (TEM). In the potentiodynamic polarization test and EIS measurement, the corrosion current density of TiN deposited by two grid-attached magnetron sputtering was lower than TiN deposited by conventional magnetron type and also presented higher Rct values during 240 h immersion time. It is attributed to the formation of a dense microstructure, which promotes the compactness of coatings and yields lower porosity.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.525-529
• /
• 1991

A simple route is described for the selective functionalization of calixarene at the para positions of phenyl rings. Calix[4]arene tetraacetate 2, obtained from the treatment of calix[4]arene with acetic anhydride, undergoes Fries rearrangement to yield the diametrically para substituted p-diacetylcalix[4]arene 3 in 80% yield. The crystal and molecular strucutre has been determined by X-ray diffraction method. The crystals are orthorhombic, space group Pna21, with a = 11.121 (3), b = 10.374 (3), c = 21.690 (6) $\AA$ and Z = 4. The structure was solved by direct method and refined by full-matrix least-squares methods to final R of 0.036 for 1795 observed reflections. Each hydroxyl hydrogen atom is disordered over two positions. The macrocycle exists in the cone conformation which is determined by the strong circular intramolecular flip-flop type hydrogen bonds of phenolic OH, while crystal packing effects of the diametrically para-acetyl substituents seem to be responsible for the distortion of the cone conformation.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.49-53
• /
• 2009

The oxygen barrier films were formed on poly(ethylene terephthalate) (PET) substrate by a sol-gel process using 3-aminoproprytrimethoxysilane (APTMOS). The effects of solvent type, coating times and incorporation of fumed silica on oxygen permeability coefficient were investigated. The APTMOS coating film prepared from methanol as a solvent exhibited higher oxygen barrier properties than that using THF. The oxygen permeability coefficient of coated film with APTMOS/methanol by coating 7 times was measured to be $2.28{\times}10^{-6}$, while that of PET film was $1.16{\times}10^{-4}$ GPU. The addition of fumed silica does not affect the oxygen barrier properties. It may be explained that silica particles disrupt chain packing, which leads to an increase in free volume for permeation.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.276-280
• /
• 2001

The self-assembled formation of octadecanethiol (CH3(CH2)17SH) on a gold substrate was studied using a quartz crystal microbalance (QCM) and a scanning tunneling microscope (STM). From the QCM measurements at vario us concentrations of octadecanethiol solutions in hexane and alcohol, the adsorption process of octadecanethiol onto Au was confirmed to consist of two steps as follows: (i) fast but disordered adsorption and (ii) a thermodynamically controlled rearrangement for uniform packing of octadecanethiol. Also, it was revealed that the adsorption rate became faster in ethanol than in hexane since less solubility of octadecanethiol in ethanol could help the formation of the monolayers. At 5 ${\times}$10-7 M solution, the monolayer formation was monitored by STM. The morphology of monolayer region was initially circular (diameter size: 7.26 $\pm$ 2.1 nm) and gradually changed to a stripe type after several minutes. At higher concentration, the self-assembled monolayer was formed immediately after the solution was introduced to a substrate.

• Clinical and Experimental Pediatrics
• /
• v.52 no.9
• /
• pp.1035-1037
• /
• 2009

Patent ductus arteriosus (PDA) is a common congenital heart defect. All PDAs, regardless of size or degree of symptoms, require occlusion. Transcatheter PDA occlusion features fewer complications than trans-thoracic closure. It is also more cost-effective and has an excellent occlusion rate. Therefore, transcatheter PDA occlusion is accepted as the standard treatment option for PDA. However, tubular-type PDAs are difficult to close with ordinary detachable coils or the Amplatzer Duct Occluder; thus, these lesions remain a challenge for transcatheter closure. We attempted to occlude a tubular-type PDA by using an oversized Amplatzer Vascular Plug, which allowed intraluminal packing of the ductus. By using this treatment method, PDA occlusion was achieved safely with an excellent final outcome. We suggest that this approach may be a good option for transcatheter closure of a tubular-type PDA.