• 설비공학논문집
• /
• 제3권3호
• /
• pp.176-185
• /
• 1991

Pressure drop and flow characteristics through a filter medium have been investigated numerically. A basic model similar to the filter employed in a hard disk drive was established so that the inflow velocity was 0.1 m/s and the box size was $40mm{\times}50mm{\times}30mm$. The filter medium specifications were 0.38mm of thickness, $1{\mu}m$ of fiber diameter, 0.05 of packing density. And the filter medium was pleated by 10 within the filter box. Twenty-one sets of calculation were performed with different inlet velocities, pleated numbers, and packing densities from the basic model. As the result, it was found that the velocity after filter medium had maximum value at the rear of the upstream pleated line, but had minimum value at the rear of the downstream pleated line. This made the velocity distribution have sinusoidal form immediately after the filter medium. As the inlet velocity increased, the pressure drop increased linearly. But as the packing density increased the pressure drop increased quadratically.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.57-62
• /
• 2017

차량의 전자화가 진행됨에 따라 차량내 전자제어장치의 사용이 증가하고 있으며 각 제어장치들은 급증하는 정보의 처리를 위해 차량 통신 네트워크에 연결되고 있다. 본 논문에서는 FlexRay-CAN의 이종 통신망에 연결된 액추에이터의 네트워크 기반 제어를 위한 FlexRay-CAN 게이트웨이를 구현하고 FlexRay 슬롯의 2분법을 사용하여 할당된 최소한의 FlexRay 프레임 ID (Frame ID)를 사용하여 필요한 센서 정보를 제어 안정성을 보장하는 최대 허용 지연시간 이내로 전송하기 위한 패킹 알고리즘 제안한다. 접촉 힘 센서 정보를 대상으로 패킹맵을 구성하였으며 제안된 알고리즘은 이종의 네트워크에 분산되어 있는 시스템의 제어에 적용할 수 있다.

• 설비공학논문집
• /
• 제21권9호
• /
• pp.496-504
• /
• 2009

In order to investigate the feasibility of a direct ice slurry transporting system for the purpose of district cooling, a case study of field application is performed. The research aims include the field measurement of ice packing factor, the performance of coldness delivery, and the branching characteristics of ice slurry. Two representative types of pipe branch are dealt with in this work. For the slurry flow with ice volume fraction of 0.16 or less, the pipe blocking due to aggregation is not observed. Based on the time-wise variation of temperature in the storage tank, a calculating method of ice packing factor is newly developed, which seems to be useful when the brine concentration is unknown. It is confirmed that the mass flow rate of ice slurry per unit cooling load is markedly reduced with increasing the ice content. The pumping power also decreases, but remains unchanged for high ice fractions. The distribution of ice particle before and after branching shows a good uniformity within the range of 5% difference, but yields a unique trend depending on the flow rate.

• 한국컴퓨터정보학회논문지
• /
• 제20권10호
• /
• pp.61-68
• /
• 2015

This paper deals with the pre-marshalling problem that the containers of container yard at container terminal are relocated in consensus sequence of loading schedule of container vessel. This problem is essential to improvement of competitive power of terminal. This problem has to relocate the all of containers in a bay with minimum number of movement. There are various algorithms such as metaheuristic as genetic algorithm and heuristic algorithm in order to find the solution of this problem. Nevertheless, there is no unique general algorithm that is suitable for various many data. And the main drawback of metaheuristic methods are not the solution finding rule but can be find the approximated solution with many random trials and by coincidence. This paper can be obtain the solution with O(m) time complexity that this problem deals with bin packing problem for m stack bins with descending order of take out ranking. For various experimental data, the proposed algorithm can be obtain the optimal solutions for all of data. And to conclude, this algorithm can be show that most simple and general algorithm with simple optimal solution finding rule.

• 한국수소및신에너지학회논문집
• /
• 제21권2호
• /
• pp.111-116
• /
• 2010

In this study, the structural analysis was performed to optimize the membrane humidifier with hollow fiber membrane for polymer electrolyte membrane fuel cell system. The main design factors were considered by evaluating the humidifying performance according to various structural parameters such as packing density and length. The effects of operation conditions of membrane humidifier were also elucidated experimentally. Results imply that there are optimum points for the packing density and length of humidifier. It was also found that among operation conditions, relative humidity of wet exhaust gas and temperature of dry inlet gas have major effects on the humidifying performance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.242-248
• /
• 2003

본 논문에서는 다양한 종류와 다양한 크기의 화물에 대해 3차원 적재하는 방법으로서 휴리스틱 기법을 이용한 해법을 제안하였다. 먼저, 컨테이너 비용을 적재비용, 수송비용 및 처리비용의 합으로 나타내며. 화물간 우선순위 및 화물 내에서의 개수 간 우선순위를 적용하였다. 주어진 화물을 적재 공간 및 중량을 만족하면서 위의 컨테이너 비용을 최소화하는 컨테이너 종류 및 개수를 산출하였으며, 적재 시 화물의 팔레타이져 및 디팔레타이져로서 컨테이너 내의 공간 이용률을 극대화시켰다. 마지막으로 화물의 무게 균등화를 고려하여 취급중의 화물의 손상방지를 행하였다.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.301-306
• /
• 2003

Multilayered WC-Ti/suv $1-x/Al_{x}$ N coatings were deposited on AISI D2 steel using cathodic arc deposition (CAD) method. These coatings contain structural defects such as pores or droplets. Thus, the substrate is not completely isolated from the corrosive environment. The growth defects (pores, pinholes) in the coatings are detrimental to corrosion resistance of the coatings used in severe corrosion environments. The localized corrosion behavior of the coatings was studied in deaerated 3.5 wt.% NaCl solution using electrochemical techniques (potentiodynamic polarization test) and surface analyses (GDOES, SEM, AES, TEM). The porosity was calculated from the result of potentiodynamic polarization test of the uncoated and coated specimens. The calculated porosity is higher in the $WC-Ti_{0.6}$ $Al_{0.4}$ N than others, which is closely related to the packing factor. The positive effects of greater packing factor act on inhibiting the passage of the corrosive electrolyte to the substrate and lowering the localized corrosion kinetics. From the electrochemical tests and surface analyses, the major corrosion mechanisms can be classified into two basic categories: localized corrosion and galvanic corrosion.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.171-188
• /
• 2020

The past research on cold-formed steel (CFS) flexural members have proved that rectangular hollow flanged sections perform better than conventional I-sections due to their higher torsional rigidity over the later ones. However, CFS members are vulnerable to local buckling, substantially due to their thin-walled features. The use of packing, such as firmly connected timber planks, to the flanges of conventional CFS lipped I-sections can drastically improve their flexural performance as well as structural efficiency. Whilst several CFS composites have been developed so far, only limited packing materials have been tried. This paper presents a series of tests carried out on different rectangular hollow compression flanged sections with innovative packing materials. Four-point flexural tests were carried out to assess the flexural capacity, failure modes and deformed shapes of the CFS composite beam specimens. The geometric imperfections were measured and reported. The North American Specifications and Indian Standard for cold-formed steel structures were used to compare the design strengths of the experimental specimen. The test results indicate clearly that CFS rectangular 'compression' flanged composite beams perform significantly better than the conventional rectangular hollow flanged CFS sections.

• 대한안전경영과학회지
• /
• 제22권2호
• /
• pp.1-6
• /
• 2020

Apples are one of the most produced fruits in Korea, with 2,423,000 tons of fruits produced in Korea in 2018, of which 365,000 tons (MAF, 2018) account for about 15% of the total production. For quality safety after harvesting apples, the application of MA(modified atmosphere) packaging technology (Mostofi et. al., 2008) is being actively studied. In addition, the effects of functional packaging materials that have added functions such as fireproof, antibacterial, high-blocking, degradability, and far-infrared radiation have been studied (Chung et al., 2009). In addition, there are reports of the effects of quality changes (Park et al., 2007) and MA storage methods on the quality of apples by packing apples with functional MA films((Park et al., 2004). But there are only few reports on quality safety by analyzing the correlation between the change of reducing sugar and total sugar and preference during storage by packing Geochang, Yeongju, and Yesan apples in functional MA film. Therefore, this study aims to propose a method to secure the quality safety of apples by investigating the effect of sugar change on the preference of apples during storage by packing apples in three regions in functional MA films.